Edge Beading Router Bit

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
  1. Rockler Edge Beading Router Bits - 1/2" Shank

    Rockler Edge Beading Router Bits - 1/2" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $26.24
  2. Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Our Convex Edging Bit can be used to rout the rounded flanks of homemade Lincoln logs—a children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table…

    1 Review(s)
    $29.99
  3. Freud® 99-020 Corner Beading Router Bit - 15/16" Dia x 5/8" H x 1/2" Shank

    Freud® 99-020 Corner Beading Router Bit - 15/16" Dia x 5/8" H x 1/2" Shank

    Application: Beams, posts, railings and fine furniture. * Adds an attractive bead to beams, posts, railings, and millwork. * Ideal for accenting square table legs. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on hand-held and table-mounted portable routers.

    $47.97
  4. Freud® Quadra-Cut™ Beading Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Beading Router Bits - 1/2" Shank

    …the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Beading bit applications: Create decorative bead edges.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    3 Review(s)
    From: $38.97
  5. Rockler Edge Beading Router Bits - 1/4" Shank

    Rockler Edge Beading Router Bits - 1/4" Shank

    With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the…

    4 Review(s)
    From: $34.99
  6. Freud® Traditional Beading Router Bits - 1/2" Shank

    Freud® Traditional Beading Router Bits - 1/2" Shank

    This Freud beading bit makes quick work of routing both beaded moldings and beaded edges for larger cabinetry elements. With its integral guide bearing, there is no need to set the depth of cut with a fence. You can even use the bit without a router table at all. The taller section at the top of the…

    3 Review(s)
    From: $35.97
  7. Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    Rockler Triple Bead Router Bit - 7/8" Dia x 1" H x 1/2" Shank

    Whether you need three beads in a row, or just a single bead for a decorative edge, this multi-purpose beading bit will suit your needs. Just crank the bit up or down to reveal as much of the cutter as is required. Cuts 1-3 beads in a single pass, potentially tripling productivity. Ideally suited…

    3 Review(s)
    $46.99
  8. Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    Rockler Classic Roman Ogee Router Bits - 1/4" Shank

    The symmetry of this edge profile exhibits a balance that is pleasing to the eye. A simple cove with a matching bead, nothing more, nothing less. The bit is available in several radiuses, all including a ball-bearing guide to eliminate burning. 1/4" shank.

    2 Review(s)
    From: $39.99
  9. Rockler Beaded Base Molding Router Bit - 1-5/8" Dia x 2" H x 1/2" Shank

    Rockler Beaded Base Molding Router Bit - 1-5/8" Dia x 2" H x 1/2" Shank

    Use this bit to cut neatly tapered case moldings and baseboard moldings. When set with the guide bearing running against the material, the bit routs a small bead at the bottom of the molding—a subtle detail that looks great with or without a separate shoe molding.

    $84.99
  10. Rockler Restoration Beading Router Bits - 1/2" Shank

    Rockler Restoration Beading Router Bits - 1/2" Shank

    Our beading bits come in a range of sizes to suit many applications. Use the smaller bits to make beaded trim moldings, and the larger bits for bull-nosed edges on thicker stock. A 1/4" beaded molding mitered around doors and drawer fronts adds a subtle and strikingly attractive effect. In…

    2 Review(s)
    From: $26.99
  11. Freud® 36-119 Beading Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Freud® 36-119 Beading Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Cut with confidence with this quality Freud® edge forming router bit! Round over profile with steps on either side is ideal for decorative work.* 3/16" roundover radius.* 2-1/2" overall length.* Add an attractive bead profile to furniture and millwork.* Cuts all composition materials, plywoods,…

    $32.97
  12. Rockler Roundover/ Beading Router Bits - 1/4" Shank

    Rockler Roundover/ Beading Router Bits - 1/4" Shank

    beaded edge—these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to the beading

    13 Review(s)
    From: $22.99
  13. Router Bit Set-Up Jigs-Rail-and-Style Bits

    Router Bit Set-Up Jigs-Rail-and-Style Bits

    Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They…

    $7.69
  14. Rockler Full Bead Router Bit - 1-1/8" Dia x 5/8" H x 1/4" Shank

    Rockler Full Bead Router Bit - 1-1/8" Dia x 5/8" H x 1/4" Shank

    …bearings, this beading bit lets you cut further into the panel, and in a variety of configurations, both freehand and in a table. It also doubles as a 1/4" round over bit - just raise the bit until only the bottom radius is exposed. Two flutes and 5/8" bearings. Top quality bits that meet the high…

    $49.99
  15. Rockler Classical Edge Bead Router Bit - 1-3/8" Dia x 3/8" H x 1/2" Shank

    Rockler Classical Edge Bead Router Bit - 1-3/8" Dia x 3/8" H x 1/2" Shank

    With its graceful, elongated round over accented by a small bead, the profile on this edge forming bit looks at home on a wide variety of cabinetry styles. The 3/8" guide bearing makes setups fool-proof, and the 1/2" shank with high-grade carbide leaves a smooth, chatter-free cut.

    $45.99
  16. Freud® 99-452 Quadra-Cut™ Bead Table Edge and Handrail Router Bit - 2-5/8" Dia x 25/32" H x 1/2" Shank

    Freud® 99-452 Quadra-Cut™ Bead Table Edge and Handrail Router Bit - 2-5/8" Dia x 25/32" H x 1/2" Shank

    …shear downward to clean up any fuzzing along the edges.* Produces sturdy, attractive handrails for staircases.* Combine with another profile to create a custom design for railings and table edges.* For handrails, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves.*…

    $101.97
  17. Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    …crisp, clean edges every time, even with cross-grain cuts in difficult materials.* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers.

    13 Review(s)
    From: $40.47
  18. Freud® 84-126 Triple Fluting Router Bit - 7/8" Dia x 1-5/64" H x 1/2" Shank

    Freud® 84-126 Triple Fluting Router Bit - 7/8" Dia x 1-5/64" H x 1/2" Shank

    …the opposite edge for a wider column. The 1/2" shank ensures a steady cut with minimal vibration, while the solid carbide cutting edges promise a long life with minimal burning. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    $56.97
  19. Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    …your parts, just use the upper half of the bit for the cove, then adjust the router to cut the mating bead. The resulting joint has a "hinging" action that is perfect for any curved element. The entire bit can also be used as an attractive decorative edge or molding profile. Dimensions listed are…

    4 Review(s)
    From: $49.99
  20. Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2" Shank

    Rockler 3-Pc. Roundover/Beading Router Bit Set - 1/2" Shank

    This handy set consists of the most commonly used roundover bits: 1/4", 3/8" and 1/2" radius. Each bit comes with an extra 3/8" bearing that can be used to convert the bit to a beading bit. Each bit also features a 1/2" shank for excellent rigidity and the smoothest possible cuts. Comes in a…

    4 Review(s)
    $89.99
  21. Rockler Round Over Beading Router Bit Set - 1/4" Shank

    Rockler Round Over Beading Router Bit Set - 1/4" Shank

    Get six router bit profiles in one handy set! This router bit set includes three popular sizes of radius bits with bearings to convert each bit from a round-over to a bead edge profile. Router bits are tipped with premium grade carbide, precision balanced and finely honed for a clean cut. Includes…

    $79.99
  22. Freud® Beading Router Bits - 1/4" Shank

    Freud® Beading Router Bits - 1/4" Shank

    Cut with confidence with this Freud quality router bit! Ideal for decorative work.* Add an attractive bead profile to furniture and millwork * Cuts all composition materials, plywoods, hardwoods, and softwoods* Use on hand-held and table-mounted portable routers

    From: $29.97
  23. Freud® Traditional Beading Router Bits - 1/4" Shank

    Freud® Traditional Beading Router Bits - 1/4" Shank

    Application: Matching moldings in historic homes.* Forms a single bead with a square shoulder.* Commonly used by remodelers to match base moldings in historic homes.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    From: $33.97
  24. Rockler Roundover/ Beading Router Bits - 1/2" Shank

    Rockler Roundover/ Beading Router Bits - 1/2" Shank

    beaded edge—these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to the beading

    13 Review(s)
    $65.79 From: $24.99

    SAVE 62%

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
Feedback X