Edge Profile Router Bits

  • Items 1 - 24 of 87
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Custom Door Edge Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Rockler Custom Door Edge Router Bit - 1-5/8" Dia x 1" H x 1/2" Shank

    Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open the door without a pull.

    $59.99
  2. Rockler 3/8" and 1/2" Radius Double Cutter Router Bit Set - 1/2" Shank

    Rockler 3/8" and 1/2" Radius Double Cutter Router Bit Set - 1/2" Shank

    Cut profiles on both edges of stock simultaneously! These cutters will save you time and help you get more done with fewer router passes. Two double carbide cutters are ground with 800 grit diamond wheels to deliver smooth, efficient cutting. Cutters can be reversed on the shank, giving you 3/8" and…

    $95.39
  3. Freud® 99-061 Rail & Stile Profile Router Bit - 1-1/2" Dia x 3/8" H x 1/2" Shank

    Freud® 99-061 Rail & Stile Profile Router Bit - 1-1/2" Dia x 3/8" H x 1/2" Shank

    …facing up on the router table, and the stile or stick profiles with the stock facing down. Then use the Freud 99-062 bit or an equivalent slot cutter set up in your router table to mill the remaining elements of the profiles. Of course, the bit can also be used as an edge profiling bit, and makes a…

    $53.97
  4. Rockler Edge Beading Router Bits - 1/2" Shank

    Rockler Edge Beading Router Bits - 1/2" Shank

    …you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the size of the upper step. Of course, you can also adjust it flush if no step is desired. A classic profile for cabinet work and…

    4 Review(s)
    $34.99 From: $26.24

    SAVE 25%

  5. Freud® Cove Router Bits - 1/2" Shank

    Freud® Cove Router Bits - 1/2" Shank

    Use these coving bit to apply decorative edging to table tops, plaques and signs, and to embellish other profiles and moldings. The shear angle slices through wood similar to the way a finely honed hand plane would. Rugged 1/2" shank deadens vibration, while the finely sharpened carbide ensures a…

    From: $34.97
  6. Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    Rockler 30° Chamfer Bead Profile Router Bit - 1-1/4" Dia x 9/16" H x 1/2" Shank

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  7. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 3/4" H x 1/2" Shank

    Often woodworkers make the mistake of using a router bit that is too small for table tops. This one is ideally proportioned at a full 2-1/2" wide overall, and offers a spacious profile with a simple ogee curve as pleasing to the eye as it is to the touch. Click the "Tech Specs" tab for specific…

    $79.99
  8. Rockler Ogee Base Molding Router Bit - 1-7/8" Dia x 3/4" H x 1/2" Shank

    Rockler Ogee Base Molding Router Bit - 1-7/8" Dia x 3/4" H x 1/2" Shank

    Unique new profile available only at Rockler! Designed especially for base molding, this carbide-tipped router bit also works well for edge-shaping tabletops, box and trunk tops, picture frames, and more. The classic Roman ogee profile softens the field while maintaining sharp definition at the…

    $59.99
  9. Rockler Beaded Base Molding Router Bit - 1-5/8" Dia x 2" H x 1/2" Shank

    Rockler Beaded Base Molding Router Bit - 1-5/8" Dia x 2" H x 1/2" Shank

    Use this bit to cut neatly tapered case moldings and baseboard moldings. When set with the guide bearing running against the material, the bit routs a small bead at the bottom of the molding—a subtle detail that looks great with or without a separate shoe molding.

    $84.99
  10. Rockler Dovetail Miter Bars

    Rockler Dovetail Miter Bars

    …Rockler Dovetail Miter Bars are designed to match the profile of our 5/8" Diameter, 14 degree Dovetail Router Bit (91089, sold separately), but it will also match virtually any 5/8" 14° dovetail bit.* 1/8" tab along the bottom edge of the Dovetail Miter Bar fits into a saw kerf to prevent…

    $18.99 $9.99

    SAVE 47%

  11. Rockler Specialty Molding Router Bit - 1" Dia x 1-3/8" H x 1/2" Shank

    Rockler Specialty Molding Router Bit - 1" Dia x 1-3/8" H x 1/2" Shank

    …furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, door casings, trim, pilasters, window casing/sills, baseboards and picture frames. You can use the full profile, or just a portion of it to achieve the look you want. Features two flutes and a…

    1 Review(s)
    $49.99
  12. Rockler Roman Ogee Router Bits - 1/2" Shank

    Rockler Roman Ogee Router Bits - 1/2" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings.

    $31.99 From: $23.99

    SAVE 25%

  13. Freud® 99-450 Quadra-Cut™ Ogee Table Edge and Handrail Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    Freud® 99-450 Quadra-Cut™ Ogee Table Edge and Handrail Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    …to hog out the profile, while two smaller cutters shear downwards to eliminate any chipping or fuzzing along the edges. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. The profile can be easily combined with our Handrail Router Bit (91708, sold…

    1 Review(s)
    $88.97
  14. Rockler OE869 Decorative Ogee Router Bit - 1-5/8" Dia x 3/8" H x 1/2" Shank

    Rockler OE869 Decorative Ogee Router Bit - 1-5/8" Dia x 3/8" H x 1/2" Shank

    …Decorative Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    1 Review(s)
    $54.99
  15. Rockler Table Top Edge Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    Rockler Table Top Edge Router Bit - 2-1/2" Dia x 25/32" H x 1/2" Shank

    With it's generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side of your panel to achieve…

    $79.99
  16. Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    Rockler P602 Cove Raised Panel Router Bit - 3-1/2" Dia x 1/2" H x 1/2" Shank

    …arched top door panels! The bit cuts both the cove profile on the front of the panel and the recessed in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the…

    0 Review(s)
    $142.99
  17. Rockler Edge Beading Router Bits - 1/4" Shank

    Rockler Edge Beading Router Bits - 1/4" Shank

    …you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the size of the upper step. Of course, you can also adjust it flush if no step is desired. A classic profile for cabinet work and…

    4 Review(s)
    From: $34.99
  18. Rockler Classical Edge Bead Router Bit - 1-3/8" Dia x 3/8" H x 1/2" Shank

    Rockler Classical Edge Bead Router Bit - 1-3/8" Dia x 3/8" H x 1/2" Shank

    With its graceful, elongated round over accented by a small bead, the profile on this edge forming bit looks at home on a wide variety of cabinetry styles. The 3/8" guide bearing makes setups fool-proof, and the 1/2" shank with high-grade carbide leaves a smooth, chatter-free cut.

    $45.99
  19. Rockler Round Over Beading Router Bit Set - 1/4" Shank

    Rockler Round Over Beading Router Bit Set - 1/4" Shank

    Get six router bit profiles in one handy set! This router bit set includes three popular sizes of radius bits with bearings to convert each bit from a round-over to a bead edge profile. Router bits are tipped with premium grade carbide, precision balanced and finely honed for a clean cut. Includes…

    $79.99
  20. Rockler Dado Jig for Low Profile Straight Edge Clamp System

    Rockler Dado Jig for Low Profile Straight Edge Clamp System

    edge of the dado sled. This means you can use a 1/4" straight bit for dadoes under 1/2", or a 3/4" straight bit for wider dadoes.* Works with any straight edge!* For the ideal solution, the Dado Jig features a channel on two edges, which fits neatly into the channel on our 52" and 104" Low Profile

    1 Review(s)
    $44.99 $32.99

    SAVE 27%

  21. Rockler Cove Router Bits - 1/4" Shank

    Rockler Cove Router Bits - 1/4" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    From: $24.99
  22. Rockler Cove Router Bits - 1/2" Shank

    Rockler Cove Router Bits - 1/2" Shank

    Use for an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8"…

    2 Review(s)
    $26.99 From: $20.24

    SAVE 25%

  23. Freud® Ogee Router Bits - 1/4" Shank

    Freud® Ogee Router Bits - 1/4" Shank

    …a distinctive edge profile to cabinets, furniture, plaques, and millwork with these decorative ogee edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo™…

    From: $40.47
  24. Rockler Provincial Edge Router Bit - 1-1/8" Dia x 1" H x 1/2" Shank

    Rockler Provincial Edge Router Bit - 1-1/8" Dia x 1" H x 1/2" Shank

    Use this bit for applying a decorative edge, or to create moldings that are applied separately. You can leave shoulders on either side of the primary profile, or use only the triple round over section, which is 1/2" high. Two flute, 5/8" ball bearing guide.

    $54.99
  • Items 1 - 24 of 87
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X