Edge Bit

  • Items 1 - 24 of 246
  • Page:
    1. 1
    2. 2
    3. 3
  1. Edge V-Groove Bit, 1/2" Shank

    Edge V-Groove Bit, 1/2" Shank

    …the edges of your panel stock with these interlocking V-Groove Bits, and you'll never have to worry about misaligned boards again. When it's time to clamp up an edge joint, the parts slide into perfect alignment without any twisting, prying or hammering. The deep channel created by the V-Groove Bit

    1 Review(s)
    From: $39.99
  2. Custom Door Edge Router Bit

    Custom Door Edge Router Bit

    Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open the door without a pull.

    $59.99
  3. Drawer Pull Router Bit

    Drawer Pull Router Bit

    Use this bit to apply a comfortable finger recess around the edges of doors and drawers, useful when you want a clean look without knobs or other hardware. You can also use it to rout finger pull stock that is applied separately, and you can even use it as a decorative edge treatment for table tops…

    $49.99
  4. Rockler Bullnose Radius Bits

    Rockler Bullnose Radius Bits

    Our Bullnose Radius Bits cut a perfect half-round profile for a variety of stock widths. Unlike quarter round bits, these will not leave a flat in the middle of the stock, and you can complete the profile in a single pass. You can leave the edge perfectly smooth, or select a bit that is sized to…

    From: $29.99
  5. Table Edge Bit, 1/2'' Shank

    Table Edge Bit, 1/2'' Shank

    With it's generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side of your panel to achieve…

    $79.99
  6. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …on the base of the mortise for the wedge ring to rest in. Using the 1/2" Tenon-Lok™ Dovetail Drill Bit: 1. Drill a standard 1/2" round mortise with a forstner bit or another bit of your choice. 2. Chuck the 1/2" Tenon-Lok™ cutting tool in your drill. 3. Before starting the drill,…

    2 Review(s)
    $25.49
  7. 30 Degree Chamfer Bead Profile Bit

    30 Degree Chamfer Bead Profile Bit

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  8. Router Bit Set-Up Jigs-Rail-and-Style Bits

    Router Bit Set-Up Jigs-Rail-and-Style Bits

    Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They…

    $7.69
  9. 1/8'' Miniature Roundover Router Bit

    1/8'' Miniature Roundover Router Bit

    Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts! This bit features a small 1/8" radius, and can be used as a round over bit, or lowered to create a bead on one face of the workpiece. 1/8" radius bits are also ideal for softening the edges

    2 Review(s)
    $19.99
  10. 1/2'' Convex Edging Router Bit

    1/2'' Convex Edging Router Bit

    Our Convex Edging Bit can be used to rout the rounded flanks of homemade Lincoln logs—a children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table…

    1 Review(s)
    $29.99
  11. 2-1/2'' Table Top Edge Bit, 1/2'' Shank

    2-1/2'' Table Top Edge Bit, 1/2'' Shank

    With it's generous 2-1/2" diameter, this edge profiling bit works beautifully for table tops, cabinet tops and built-up moldings. The broad round over tapers toward the edge, resulting in a lighter, less bulky look. You can profile either the bottom side or the top side to achieve different visual…

    1 Review(s)
    $69.99
  12. Twin Step Ogee Bit OE833

    Twin Step Ogee Bit OE833

    …Step Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and is silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most…

    $44.99
  13. Freud Quadra-Cut Ogee Double Fillet Bits

    Freud Quadra-Cut Ogee Double Fillet Bits

    …prevent chip-out and fuzzing at the edges. This ogee double fillet bit is ideal for applying a decorative edge on cabinet, molding and furniture components.* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.* Cuts all composition materials,…

    5 Review(s)
    $41.47
  14. 30° Chamfer Router Bit

    30° Chamfer Router Bit

    This chamfer bit can be used to apply a beveled edge to cabinetry and furniture elements, or to chamfer the edge joints for multi-sided objects. With a 30 degree angle, it's perfectly suited for hexagonal barrels or columns, and you can also use it to build segmented turning blanks.

    1 Review(s)
    $39.99
  15. Porter Cable 1-3/4 HP D-Handle Router, Model #691

    Porter Cable 1-3/4 HP D-Handle Router, Model #691

    …lever for simple edge-forming. Use the micro depth adjustments for bit depth changes accurate to 1/128 of an inch. It accepts collets for 1/4 and 1/2 inch shank bits and features an auto-release collet system minimizing frozen bits. Technical Details:* 11 Amp, 27,500 rpm motor producing 1-3/4 Peak…

    2 Review(s)
    $183.99
  16. Classical Edge Bead Bit

    Classical Edge Bead Bit

    With its graceful, elongated round over accented by a small bead, the profile on this edge forming bit looks at home on a wide variety of cabinetry styles. The 3/8" guide bearing makes setups fool-proof, and the 1/2" shank with high-grade carbide leaves a smooth, chatter-free cut.

    $45.99
  17. Ogee Base Molding Bit

    Ogee Base Molding Bit

    Unique new profile available only at Rockler! Designed especially for base molding, this carbide-tipped router bit also works well for edge-shaping tabletops, box and trunk tops, picture frames, and more. The classic Roman ogee profile softens the field while maintaining sharp definition at the…

    $59.99
  18. Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    …provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.* Cuts all composition materials, plywoods, hardwoods, and…

    13 Review(s)
    From: $40.47
  19. No Drip Edge Router Bit

    No Drip Edge Router Bit

    …objects. In addition, the round over is pleasing to the eye and to the touch, and provides a comfortable edge to rest against. The bearing guide makes the bit easy to use. Simply apply a separate edge molding with enough projection for the profile, then rout along the edge to create the drip rail.

    0 Review(s)
    $47.99
  20. Finger Joint Router Bit

    Finger Joint Router Bit

    With its multiple interlocking fingers, this bit creates maximum gluing surface area for superior edge joints and splice joints. The fingers have a wedged shape, which when clamped together, helps to close up the joint without any gaps. 3/4" guide bearing.

    1 Review(s)
    $89.99
  21. Roman Ogee Bit OE822

    Roman Ogee Bit OE822

    …Roman Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and is silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the most…

    $42.99
  22. Freud Quadra-Cut Classical Ogee & Round Bit

    Freud Quadra-Cut Classical Ogee & Round Bit

    …clean up any fuzzing or chipping that might remain along the edges. The result is an absolutely flawless cut that requires no sanding.* Add distinctive design to cabinets, furniture, plaques and millwork with these decorative edging bits.* Cuts all composition materials, plywoods, hardwoods, and…

    3 Review(s)
    $55.47
  23. Miniature Roman Ogee Router Bit

    Miniature Roman Ogee Router Bit

    …router Bits fill the need for appropriately sized bits for jewelry boxes, humidors, and other small boxes and crafts. They feature the same top-quality carbide and other features of our standard bits, and of course, they carry our satisfaction guarantee. Features an 8mm bearing for burn-free edges

    1 Review(s)
    $19.99
  24. Roman Ogee Router Bits-1/4" Shank

    Roman Ogee Router Bits-1/4" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings. 1/4" shanks.

    1 Review(s)
    From: $31.99
  • Items 1 - 24 of 246
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X