Edge Router Bit

  • Items 1 - 24 of 203
  • Page:
    1. 1
    2. 2
    3. 3
  1. Edge V-Groove Bit, 1/2" Shank

    Edge V-Groove Bit, 1/2" Shank

    …the edges of your panel stock with these interlocking V-Groove Bits, and you'll never have to worry about misaligned boards again. When it's time to clamp up an edge joint, the parts slide into perfect alignment without any twisting, prying or hammering. The deep channel created by the V-Groove Bit

    1 Review(s)
    From: $39.99
  2. Ogee Door Bit OE804

    Ogee Door Bit OE804

    This Ogee Door Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    $49.99
  3. Roman Ogee Router Bits-1/4" Shank

    Roman Ogee Router Bits-1/4" Shank

    This ogee is features a smooth curve, so the cove and round over blend seamlessly into one another. The profile works well for edging table tops, or you can use it to rout lengths of molding stock to trim out the underside of tops, soffits and built-up crown moldings. 1/4" shanks.

    1 Review(s)
    From: $31.99
  4. Custom Door Edge Router Bit

    Custom Door Edge Router Bit

    Our Custom Door Edge Router Bit matches the most popular profile used in the kitchen cabinetry industry today. It is both decorative and functional, featuring a cove on the face side of the door and a bevel toward the rear, which makes it easy to open the door without a pull.

    $59.99
  5. 1/8'' Miniature Roundover Router Bit

    1/8'' Miniature Roundover Router Bit

    Rockler miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts! This bit features a small 1/8" radius, and can be used as a round over bit, or lowered to create a bead on one face of the workpiece. 1/8" radius bits are also ideal…

    2 Review(s)
    $19.99
  6. Rockler Bullnose Radius Bits

    Rockler Bullnose Radius Bits

    Our Bullnose Radius Bits cut a perfect half-round profile for a variety of stock widths. Unlike quarter round bits, these will not leave a flat in the middle of the stock, and you can complete the profile in a single pass. You can leave the edge perfectly smooth, or select a bit that is sized to…

    From: $29.99
  7. Freud Quadra-Cut Cove and Bead Bits

    Freud Quadra-Cut Cove and Bead Bits

    …rout out the bulk of the waste, while two downshear cutters clean up any fuzzing or chipping along the edges. Use for decorative edging on cabinets, molding, furniture and plaques.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers.

    13 Review(s)
    $49.47
  8. DeWalt DWP611PK Compact Router

    DeWalt DWP611PK Compact Router

    …and electronic speed control to maintain speed under load. Intuitive depth adjustment ring, quick-release tabs and adjustable clamp make adjustments a snap. 1/4" collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes.

    3 Review(s)
    $199.00
  9. 11.25° Chamfer Router Bit

    11.25° Chamfer Router Bit

    This chamfer bit can be used to apply a beveled edge to cabinetry and furniture elements, or to chamfer the edge joints for multi-sided objects. With an 11.25 degree angle, it's perfectly suited for 16-sided barrels or columns, and you can also use it to build segmented turning blanks.

    1 Review(s)
    $34.99
  10. Decorative Ogee Bit OE869

    Decorative Ogee Bit OE869

    …Decorative Ogee Router Bit is manufactured using the finest grade K20 tungsten carbide, and are silver brass welded for the strongest possible bone. We use a 600 grit diamond wheel on the final sharpening to produce the sharpest possible edge for a clean cut and long life. Plus, this bit matches the…

    1 Review(s)
    $54.99
  11. Provincial Edge Bit

    Provincial Edge Bit

    Use this bit for applying a decorative edge, or to create moldings that are applied separately. You can leave shoulders on either side of the primary profile, or use only the triple round over section, which is 1/2" high. Two flute, 5/8" ball bearing guide.

    $54.99
  12. 30 Degree Chamfer Bead Profile Bit

    30 Degree Chamfer Bead Profile Bit

    This Rockler exclusive bit is a perfect fit for drawer fronts to complement raised panel doors, especially straight or Shaker-style raised panel doors. The flat field with steps on either side is a classic design common on old molding planes, but hard to find in router bit form.

    2 Review(s)
    $49.99
  13. Freud® Bevel Trim Router Bits

    Freud® Bevel Trim Router Bits

    …a clean, finished edge that feels as nice as it looks. These Freud® Bevel Trim Router Bits are the perfect candidates. Available in bevels of 8°, 15° and 45°, the bits cut all plastic laminates and can be used with handheld routers, table-mounted portable routers and compact laminate…

    From: $28.97
  14. Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    Freud Quadra-Cut Cove and Bead Bits-Optional Sizes

    …crisp, clean edges every time, even with cross-grain cuts in difficult materials.* Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted routers.

    13 Review(s)
    From: $40.47
  15. Miniature Chamfer Router Bit

    Miniature Chamfer Router Bit

    At first glance, you might think a miniature chamfer bit cuts the same edge as a full-size chamfer bit—a 45 degree angle, right? Right. But where these miniature bits excel is in cutting inside corners. Because of the tiny guide bearing, they cut deeper into the corner, and because of the…

    $19.99
  16. Miniature Classic Roman Ogee Router Bit

    Miniature Classic Roman Ogee Router Bit

    …miniature router Bits are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts. This one features an attractive dual radius with the option of creating a shoulder on the top side. The 8mm guide bearing prevents burning along the edges, and ensures…

    $19.99
  17. Classic Cove Router Bits-1/2" Shank

    Classic Cove Router Bits-1/2" Shank

    Our Classic Cove Router Bits feature a small step on either side of a basic cove, adding a bit of definition to an otherwise graceful curve. The bits are available in several radiuses, each with a guide bearing. If desired, a separate larger bearing can be installed to achieve a basic cove. Sturdy…

    0 Review(s)
    From: $39.99
  18. Freud Down-Spiral Router Bits

    Freud Down-Spiral Router Bits

    …and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    3 Review(s)
    From: $50.97
  19. Freud Quadra-Cut™ Rounding Over Bits

    Freud Quadra-Cut™ Rounding Over Bits

    …get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Rounding over bit applications: Soften furniture edges and create decorative rounded edges.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and table-mounted portable routers.

    11 Review(s)
    From: $38.97
  20. No Drip Edge Router Bit

    No Drip Edge Router Bit

    …objects. In addition, the round over is pleasing to the eye and to the touch, and provides a comfortable edge to rest against. The bearing guide makes the bit easy to use. Simply apply a separate edge molding with enough projection for the profile, then rout along the edge to create the drip rail.

    0 Review(s)
    $47.99
  21. Solid Wood Edging

    Solid Wood Edging

    Save time and money with edge-banding strips! Thicker, more durable edge allows you to shape the edge using various router bits. Plus, pieces are planed to eliminate having to scrape or sand out saw kerf marks. Solid wood edging is perfect for furniture and other projects where a solid look is…

    3 Review(s)
    $10.19
  22. Table Top Edge Router Bit

    Table Top Edge Router Bit

    This bit features an elongated round over that softens and beautifies table edges and moldings. You can set it to rout a small shoulder on the face of the workpiece, or to rout flush for a smooth round over. The deepness of the profile results in a very smooth transition from radius to face. Top…

    $42.99
  23. 1/2'' Convex Edging Router Bit

    1/2'' Convex Edging Router Bit

    Our Convex Edging Bit can be used to rout the rounded flanks of homemade Lincoln logs—a children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table…

    1 Review(s)
    $29.99
  24. Table Edge/Handrail Router Bit

    Table Edge/Handrail Router Bit

    …used as a handrail bit, the handrail is routed on both edges to put a smooth convex contour on the top face of the handrail. If desired, use our Handrail Router Bit (91708, sold separately) to rout the finger grooves on the cheeks of the handrail. When used as a table edge bit, it routs an elegant,…

    $74.99
  • Items 1 - 24 of 203
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X