Edgebanding

  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
  1. Edge Banding Machine

    Edge Banding Machine

    …200° to 1100°.* 120 volts, 1500 watts. * Rear-mounted on/off switch and top-mounted heat control dial allow use of a wider variety of edge-banding materials.* Light, durable construction and adjustable, non-skid rubber feet. * Built-in cut-off knife has a palm-strike knob. * All fences and…

    12 Review(s)
    $319.99
  2. Hot-Melt Edge Bandings   50' Rolls

    Hot-Melt Edge Bandings 50' Rolls

    …Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent…

    From: $13.49
  3. 1-9/16" Plyedge® Real Wood Edging

    1-9/16" Plyedge® Real Wood Edging

    If you can iron you can apply Plyedge®! Just position edge banding and heat with either our hand held iron or edge banding machine. This item backing creates a permanent bond. Then simply cut and trim edging to make plywood look like solid stock.

    2 Review(s)
    From: $7.99
  4. Plastic Preglued Edge Banding, Melamine   Select Option

    Plastic Preglued Edge Banding, Melamine Select Option

    Plastic Preglued Edge Banding is a two-ply polyester edge-banding material with a hot-melt adhesive backing, allowing easy application with a household iron. It is very flexible, accommodating both inside and outside curves, and is ideal for taping the raw edge on melamine or Formica sheet goods and…

    3 Review(s)
    $6.99
  5. Solid Wood Edging

    Solid Wood Edging

    Save time and money with edge-banding strips! Thicker, more durable edge allows you to shape the edge using various router bits. Plus, pieces are planed to eliminate having to scrape or sand out saw kerf marks. Solid wood edging is perfect for furniture and other projects where a solid look is…

    3 Review(s)
    $10.19
  6. Hot-Melt Edge Bandings   250' Rolls

    Hot-Melt Edge Bandings 250' Rolls

    …Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent…

    2 Review(s)
    From: $30.99
  7. Hot-Melt Edge Bandings   25' Rolls

    Hot-Melt Edge Bandings 25' Rolls

    …Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent…

    From: $7.99
  8. Kreg® Precision Router Table System With FREE Kreg® Precision Setup Bars

    Kreg® Precision Router Table System With FREE Kreg® Precision Setup Bars

    …lens cursor offers incredible accuracy without a tape measure and pencil.* 1-1/8" thick MDF top for reduced noise.* MDF top is professionally edgebanded, and reinforced by two steel-struts to prevent sagging over time.* Impact resistant Easy-Slide™ micro-dot high pressure laminate skin for…

    1 Review(s)
    $540.99 $499.00
  9. Plastic T-Molding Edging-3/4" Wide x 12' Long

    Plastic T-Molding Edging-3/4" Wide x 12' Long

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

    23 Review(s)
    $17.99
  10. Plastic T-Molding Edging-3/4" Wide x 100' Long

    Plastic T-Molding Edging-3/4" Wide x 100' Long

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

    23 Review(s)
    $43.99
  11. FastCap SpeedTape Double-Sided Tape

    FastCap SpeedTape Double-Sided Tape

    …As always, do a test to ensure SpeedTape is suitable for your application.* Finishing veneers is very important with SpeedTape - always follow finishing instructions precisely.* Ideal for: edgebanding, veneers, laminate, applying carpet, jigs and fixtures, general adhesives, peel-and-stick moldings.

    $10.49
  12. Prefinished Ash 15/16" Peel & Stick Edge Banding, 250' Roll

    Prefinished Ash 15/16" Peel & Stick Edge Banding, 250' Roll

    Fastedge is a peel & stick edgebanding made with high performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!

    $174.99
  13. Edgebanding Iron

    Edgebanding Iron

    Edge banding your cabinets just got a lot easier and more accurate with this Edgebanding Iron! Choose the temperature that best helps you melt the banding adhesive with the adjustable temperature control and you're ready to go. A beefy wooden handle stays cool while the iron is on, protecting your…

    6 Review(s)
    $73.49
  14. Plastic T-Molding Edging-13/16" W x 12' Long

    Plastic T-Molding Edging-13/16" W x 12' Long

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

    23 Review(s)
    $15.49
  15. Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit

    …1/2" thick stock.* Use #7 x 1-1/4" washer-head fine thread screw when joining material to hardwood, such as hardwood face frames, attaching edge-banding, and cabinet walls to face frame. For use in 3/4" thick stock.* Use #8 x 2-1/2" washer-head coarse thread screw in both hardwood and softer…

    9 Review(s)
    $29.99
  16. Plastic T-Molding Edging-13/16" Wide x 100' Long

    Plastic T-Molding Edging-13/16" Wide x 100' Long

    Use 3/4" molding for plywood, and 13/16" molding for laminated sheet goods. 3/4" wide molding requires a 1/16" kerf. 13/16" molding requires a 5/64" kerf. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove.Available in four different…

    23 Review(s)
    $47.99
  17. Kreg Precision Router Table Top

    Kreg Precision Router Table Top

    This professionally edgebanded 1" thick MDF top absorbs vibration and noise like no phenolic top can. Provides a solid, secure, and quiet routing solution for any workshop. It features an Easy-Slide™ Micro-Dot skin- made from an impact resistant high-pressure laminate - which makes it…

    $179.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
Feedback X