End Grain

  • Items 1 - 24 of 98
  • Page:
    1. 1
    2. 2
    3. 3
  1. Colt HSS Pen Making Drill Bits-Inches

    Colt HSS Pen Making Drill Bits-Inches

    Designed especially for turning projects, these bits drill quickly and cleanly through end grain and acrylic without breakout on entrance or exit. Four cutting points drill efficiently and create small chips that are ejected through the parabolic flute design, eliminating burning and jamming.

    $17.99 From: $9.00

    SAVE 50%

  2. Curly Cherry 6-Pack

    Curly Cherry 6-Pack

    …find it with curly grain, it exhibits a deep iridescence that is truly unrivaled. These boards are hand selected for the best curly grain and bundled into a six pack of boards approximately 24'' long by 5-7'' wide. The sizes are ideal for a variety of smaller projects, including end tables, stools…

    0 Review(s)
    $89.99
  3. Oneway Termite Hollowing Tool Package

    Oneway Termite Hollowing Tool Package

    …turner's arsenal. It does deep end grain hollowing quickly, and with incredible precision. It's also great for finishing cuts on any flat or curved surface. It drastically reduces finish sanding, saving both time and money. Because it excels at end grain, pommels on spindles can be cut unbelievably…

    2 Review(s)
    $99.79
  4. Rockler Shear Flush Trim Bit Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Shear Flush Trim Bit Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    …fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, figured grain or cross-grain on hardwoods.

    13 Review(s)
    $34.99
  5. Walnut Claro Turning Blanks

    Walnut Claro Turning Blanks

    …walnut claro bowl blank is more likely to have interlocked grain than normal American black walnut, and thus more likely to have curly figure, but even pieces without curly figure can be quite striking because of the color and grain patterns. Choose from four sizes: 4" x 4" x 4", 5" x 5" x 2",…

    From: $10.49
  6. Robert Sorby Ring Tool

    Robert Sorby Ring Tool

    Designed specifically for end grain hollowing. The dual bevels allow for hollowing of internal curved surfaces and flat bottomed vessels. These tools produce an unrivaled surface finish on end grain. Ideal for goblets and egg cups. Comes complete with full instructions.

    1 Review(s)
    $73.99
  7. Flat Top End Grain Plugs-3/8 inch

    Flat Top End Grain Plugs-3/8 inch

    Hide screw heads. Flat top plugs are ideal for sanding flush to your woodwork. Made from kiln dried stock. End grain. Has tapered sides which makes bottom 1/32" smaller than overall diameter. 1/4" long. Quick and easy to install with wood glue. 50 per pack.

    2 Review(s)
    $4.19
  8. Hex Drive Threaded Inserts-Choose size

    Hex Drive Threaded Inserts-Choose size

    Use for a tight grip! Larger teeth give increased holding strength, ideal for end grain and particle board applications. Made of die cast zinc alloy. Has a self tapping harpoon thread. Thread listed is the size of the internal thread size. Sold in pack of 8.

    16 Review(s)
    $6.99
  9. Flat Top End Grain Plugs-1/2 inch

    Flat Top End Grain Plugs-1/2 inch

    Hide screw heads. Flat top plugs are ideal for sanding flush to your woodwork. Made from kiln dried stock. End grain. Has tapered sides which makes bottom 1/32" smaller than overall diameter. 1/4" long. Quick and easy to install with wood glue. 50 per pack.

    2 Review(s)
    $4.19
  10. Fisch HSS Pen Making Drill Bit - 8mm

    Fisch HSS Pen Making Drill Bit - 8mm

    Designed especially for turning projects, this 8mm bit drills quickly and cleanly through end grain and acrylic without breakout on entrance or exit.

    1 Review(s)
    $14.99
  11. Standard Forstner High Carbon Steel-Standard Forstner Bits - 1/2" Shank

    Standard Forstner High Carbon Steel-Standard Forstner Bits - 1/2" Shank

    …or finishing up your turned salt & pepper shakers! These high carbon steel Forstner Bits have two bottom cutting edges that cut side grain or end grain for smooth, accurate holes. A center brad point and the outer sharpened rim keeps your drill in position. Also available in metric sizes.

    33 Review(s)
    From: $19.99
  12. Robert Sorby Spindlemaster-Spindlemaster

    Robert Sorby Spindlemaster-Spindlemaster

    It beads, coves, planes, trims end grain and much more!The Spindlemaster is ideal for small projects like boxes and rattles, and works just as effectively on large pieces like bedposts and staircase spindles. If you have reservations about using a skew chisel, the Spindlemaster is the answer.

    12 Review(s)
    From: $56.99
  13. Colt HSS Pen Making Drill Bits - Millimeters

    Colt HSS Pen Making Drill Bits - Millimeters

    Designed especially for turning projects, these bits drill quickly and cleanly through end grain and acrylic without breakout on entrance or exit. Four cutting points drill efficiently and create small chips that are ejected through the parabolic flute design, eliminating burning and jamming.

    $25.79 From: $12.90

    SAVE 50%

  14. Individual Standard Forstner Bits, High Carbon Steel-Standard Forstner Bits - 3/8" Shank

    Individual Standard Forstner Bits, High Carbon Steel-Standard Forstner Bits - 3/8" Shank

    …installation, or finishing up your turned salt & peppershakers! These high carbon steel Forstner Bits have two bottom cutting edgesthat cut side grain or end grain for smooth, accurate holes. A center brad pointand the outer sharpened rim keeps your drill in position. Also available in metric sizes.…

    36 Review(s)
    From: $5.99
  15. CrossCut Black Palm Pen Blank

    CrossCut Black Palm Pen Blank

    …palm is widely known for its distinctive speckled grain pattern and pleasing color contrast. Additionally, these blanks are crosscut along the length of the pen, which results in a stunning alternation of the porous end grain and speckled long grain. Black palm can be a challenge to turn, but these…

    $5.99
  16. Dome-Top Wood Plugs-3/8" Diameter

    Dome-Top Wood Plugs-3/8" Diameter

    …essential. * Wood plugs have a domed top so you can leave them proud for decorative effect, or simply sand flush for a smoother appearance.* The end grain is exposed, a common choice when you want to emphasize joinery details.* Available in 3/8" and 1/2" diameters, they taper slightly for easy…

    1 Review(s)
    $4.19
  17. Dome-Top Wood Plugs-1/2" Diameter

    Dome-Top Wood Plugs-1/2" Diameter

    …essential. * Wood plugs have a domed top so you can leave them proud for decorative effect, or simply sand flush for a smoother appearance.* The end grain is exposed, a common choice when you want to emphasize joinery details.* Available in 3/8" and 1/2" diameters, they taper slightly for easy…

    $4.19
  18. Robert Sorby Micro Spindlemaster

    Robert Sorby Micro Spindlemaster

    …small turning projects, the Sorby Micro Spindlemaster is the answer. It has no corners to catch and dig in, and it planes, beads, coves and trims end grain with a polished bevel that leaves a superb finish from the tool, especially on softer woods. The 10" long Micro Spindlemaster is ideal for small…

    12 Review(s)
    $39.99
  19. Sorby Hollowing Tool Replacement Tip

    Sorby Hollowing Tool Replacement Tip

    …Tool with a razor-sharp Replacement Tip! The Sorby Hollowing Tool Replacement Tip is perfect for general purpose hollowing, cutting through end grain easily and with maximum control. The HSS tip is built to last and may be easily resharpened using a diamond file for repeated useage! Technical…

    $13.99
  20. Robert Sorby Oval Skew Chisel

    Robert Sorby Oval Skew Chisel

    …allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and v-cuts, e.g. stair balustrade and chair legs. These tools are indispensable if a fine finish…

    From: $59.99
  21. Rockler Straight Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Straight Horizontal Raised Panel Router Bits - 1/2" Shank

    …your router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curved profiles, such as for arched doors or cathedral-style doors. Sometimes…

    4 Review(s)
    From: $64.99
  22. Rockler Ogee Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Ogee Horizontal Raised Panel Router Bits - 1/2" Shank

    …router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised…

    2 Review(s)
    From: $64.99
  23. Rockler Cove Horizontal Raised Panel Router Bits - 1/2" Shank

    Rockler Cove Horizontal Raised Panel Router Bits - 1/2" Shank

    …router has enough horsepower, horizontal panel raising bits offer an exceptionally smooth shearing cut, and virtually eliminate fuzzing on the end grain of your panels. In addition, they allow you to raise panels with curving profiles, such as for arched doors or cathedral style doors. These raised…

    3 Review(s)
    From: $64.99
  24. Robert Sorby Hollowmaster

    Robert Sorby Hollowmaster

    …The Robert Sorby Hollowmaster has a flat underside which provides exceptional control and stability when hollowing and is suitable for end grain and bowl work. It is supplied with two interchangeable tips for hollowing and scraping. 10" size. Technical Details:* 10" size* Unique Hollowmaster…

    1 Review(s)
    $101.99
  • Items 1 - 24 of 98
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X