Extension

  • Items 1 - 24 of 361
  • Page:
    1. 1
    2. 2
    3. 3
  1. Safety Speed Cut Panel Pro 2 Panel Saw

    Safety Speed Cut Panel Pro 2 Panel Saw

    …Accessories (Sold Separately):* Upper Extension Bracket Kit (42874): allow for a secure way to mount wooden upper extensions (includes instructions)* Quick Stop Angle with Stop (42875): used with upper extensions for easily repeatable cutting* Lower Extensions (42872): add 20" to each side of the…

    From: $898.99
  2. Insty-Bit® Quick Change Extensions

    Insty-Bit® Quick Change Extensions

    …hex-shank drill bits or driver bits into one of these extensions. The 12" extension allows most people to reach an 8' ceiling without a ladder, and you can even line them all up for 21" of reach! Not for use with impact tools. Each extension includes a 1" #1 Plain Hex Phillips Bit and a 2" #2 Power…

    2 Review(s)
    From: $8.99
  3. SawStop Contractor Table Saw Cast Iron Extension Wing

    SawStop Contractor Table Saw Cast Iron Extension Wing

    …ground to a tolerance of 0.001". Designed specifically for the SawStop® CNS series saws, it aligns perfectly with the table, rails and extension table. Sold singly. NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United…

    1 Review(s)
    $100.00
  4. SawStop Cast Iron Wing Assembly Pair for CNS Table Saws

    SawStop Cast Iron Wing Assembly Pair for CNS Table Saws

    …SawStop CNS Table Saw. Make your saw even better looking and more stable.* Precision ground to .0001"* Aligns perfectly with table, rails, and extension table* 70 more pounds means added stability and reduced vibration Best Used With:* SawStop Contractor Table Saw w/30" Fence* SawStop Contractor…

    $189.00
  5. Rockler 3'' Shop Stand Riser Blocks

    Rockler 3'' Shop Stand Riser Blocks

    Increase the height of your Rockler Steel Shop Stand (sold separately) 3'' with this extension kit. Made from rugged 1/8" thick steel.

    0 Review(s)
    $19.99
  6. Bed Extension for Excelsior Mini Lathe MC-1018

    Bed Extension for Excelsior Mini Lathe MC-1018

    Bed Extension for Excelsior Mini Lathe MC-1018 (33207)

    2 Review(s)
    $75.59
  7. Forstner Bit Extender

    Forstner Bit Extender

    Get an extra 2-1/2" of reach into deep holes with this Forstner bit extender. Great for rustic furniture and joining wide timbers. Also works with any other style of 3/8" shank drill bit greater than 1" in diameter.Forstner bit not included.

    9 Review(s)
    $6.49
  8. 40 Ft. Lighted Extension Cord

    40 Ft. Lighted Extension Cord

    The best value for your money is our Century® Pro Style™ extension cord which offers the quality and features you need at a price you can afford. We use only soft-drawn, bunch-stranded 100% copper conductors for maximum flexibility and amperage transmission. The clear connector has a…

    1 Review(s)
    $49.99
  9. Flex Extension

    Flex Extension

    Lets you drill and drive-even in the tightest spaces! Extend your reach with the Flex Extension! It bends, twists, and turns to let you get into the tightest spaces with ease, yet lets you keep a firm and steady grip while the while the inside turning mechanism rotates.* 12" long.* Designed for…

    16 Review(s)
    $7.99 $2.99

    SAVE 63%

  10. Nova Live Center System With Stepped Cone

    Nova Live Center System With Stepped Cone

    …centerless mounting of square or round spindles up to 8mm wide. The threaded center is also needed to mount the stepped cone accessory.* Miniature Extension Center: Designed to support thin work or small, delicate turnings.* 60 Degree Center: A good all-purpose center designed for a wide variety of…

    $73.49
  11. FastCap 3rd Hand HD Extension, 5'-12'

    FastCap 3rd Hand HD Extension, 5'-12'

    The 3rd Hand HD is the help you have been looking for. It is rugged and built to last a lifetime. Versatile hand extension provides support, brace or clamp whenever you need an extra hand. 3rd Hand HD extends from 5' to 12' and has an action lever for secure pressure. It is perfect for crown molding…

    18 Review(s)
    $41.99
  12. Heavy-Duty Hugger for Cords and Hoses

    Heavy-Duty Hugger for Cords and Hoses

    Even the most carefully wound extension cords can turn into a tangled mess at the bottom of a drawer of in the back of your pickup, but not with the Heavy-Duty Hugger. This handy hook-and-loop strap firmly hugs any length of extension cord to prevent it from unwinding, and to keep the winds in…

    1 Review(s)
    $5.99
  13. Equalizer Slides-Select wood size

    Equalizer Slides-Select wood size

    Super easy one handed extension. As you pull on one half, the other side moves away.* The 28" slide can handle two 12" leaves, and the 38" model can handle three 12" leaves or two 18" leaves.* Slides measure 3" wide by 2-3/8" high and have built-in rack and pinion assemblies.* Sold in pairs.

    10 Review(s)
    From: $64.99
  14. Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    Bench Dog® ProMAX Cast Router Table Extension for Table Saws (40-102)-Router Table Package With Plate

    …Ship weight: 55 lbs. Note: ProMAX cannot be installed as a left extension replacement on left tilt "cabinet" grade table saws because the table saw's motor protrudes to the left. Nor can ProMAX be installed as a right extension replacement on right tilt "cabinet" grade table saws for the same…

    14 Review(s)
    $349.99
  15. Wooden Trestle Table Slides

    Wooden Trestle Table Slides

    …leaves up to 14" wide to your trestle style table for additional seating area with Trestle Table Slides. They provide level support and smooth extension for adding a leaf at each end of your table. Technical Details* Wooden slides extend from 26" (closed position) to 40" (open position)* Set…

    3 Review(s)
    $89.99
  16. Rockler 12-Gauge Retractable Extension Cord Reel

    Rockler 12-Gauge Retractable Extension Cord Reel

    Easily mount to a wall with attached bracket or hang from the ceiling to add convenience to your shop. Features a 30 foot extension cord that retracts and locks at any length. * Heavy duty industrial grade reel housing* Quick release mounting bracket * 36" power cord * Three receptacles.* 15 Amps /…

    66 Review(s)
    $98.99
  17. FastCap Upper Hand Work Support, Extends from 28'' to 60''

    FastCap Upper Hand Work Support, Extends from 28'' to 60''

    …Holds upper cabinets in place while you adjust for level and fasten to the wall* Extends from 28" to 60"* Padded 6" x 6" ends prevents scratching or marring* May also be used vertically to hold up to 150 lbs.Best Used With:* FastCap 3rd Hand HD Extension (Extends 5' - 12')* FastCap 3rd Hand Tripod

    5 Review(s)
    $47.29
  18. Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    Hafele SmartCab™ Base Cabinet Pull-Out With Soft-Close Slides

    The Hafele SmartCab™ is a multi-purpose, pull-out storage unit mounted on a pair of silky-smooth, full-extension soft-close slides that provide easy access to items at the back of the cabinet. The basic unit includes a full-depth shelf and a half-depth shelf plus vertical divider for two basic…

    $219.99
  19. Wonder Winder Extension Cord Manager

    Wonder Winder Extension Cord Manager

    Ever struggle with a tangled extension cord? Not with the Wonder Winder Cord Reel, which neatly coils up to 150' of heavy-duty extension cord in seconds, and lets you uncoil it without a single knot. By hanging it next to an outlet and paying out only as much cord as you need, you also eliminate…

    1 Review(s)
    $20.99
  20. Nova Lathe Bed Extension

    Nova Lathe Bed Extension

    …unit that adds 20" to the spindle turning capacity of your lathe. Multiple units can be added as needed. * Each bed extension adds 20" to your lathe.* Add as many extensions as you like to achieve the length required.* Inexpensive way to add between between center capacity to your lathe.*…

    $209.99
  21. Jet JWL-1221VS Stand Extension (719203)

    Jet JWL-1221VS Stand Extension (719203)

    Attaches to the JET JWL-1221VS Stand (47743*) to support the Bed Extension (45375*) for the JET 1221VS 12" x 21" Variable Speed Wood Lathe (45937*). *Sold separately

    $107.99
  22. Nova Comet II Bed Extension

    Nova Comet II Bed Extension

    Extend the spindle turning capacity of your Nova Comet II Midi Lathe! This bed extension adds 25-1/2" in length, extending the Comet II's distance between centers to 42". You can also add multiple bed extensions for even longer turnings. Solid cast iron throughout for durability and vibration-free…

    $115.49
  23. Festool Parallel Guide Extension Set

    Festool Parallel Guide Extension Set

    …adjustable up to 25-19/32" (650mm). The Parallel Guide Extensions connect to the Parallel Guide using a tool-less thumb screw. The Extension allows you to make narrow repetitive rip cuts ranging from 1/16" to 7-11/16" (1mm to 195mm). The Extensions must be used in conjunction with the Parallel…

    $325.00
  24. LintEater System and Extension Kit

    LintEater System and Extension Kit

    …System works with metal, foil and white vinyl dryer vents* Includes brushes, extra extension rods and adapters* Manufacturer: Gardus The LintEater Dryer Vent Cleaning System comes with a variety of brushes, extension rods and adapters to clear your ducts thoroughly, regardless of whether you have a…

    $41.19
  • Items 1 - 24 of 361
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X