Fence Track

  • Items 1 - 24 of 72
  • Page:
    1. 1
    2. 2
    3. 3
  1. Wixey Saw Fence Digital Readout

    Wixey Saw Fence Digital Readout

    Get easy digital readouts of saw fence positions between 0" and 60". Two joinable metal tracks mount to round and rectangular fence rails and can be set up to measure on the right or left of the fence. Included peel-and-stick sensor strips mount to the tracks with adhesive backing and supply the…

    8 Review(s)
    $109.99
  2. Multi Track for Jigs and Custom Fences-Multi Track

    Multi Track for Jigs and Custom Fences-Multi Track

    …on every face, these 36" tracks are full of potential - use them to create custom fences, jigs and fixtures. Once assembled, the multiple tracks give you countless options for attaching stops, hold-downs, sub-fences and more. Available in 2-1/4" and 3" heights. Multi Track Brackets and Flip Stops…

    6 Review(s)
    From: $28.99
  3. Rockler Double T-Track Fence Cap

    Rockler Double T-Track Fence Cap

    Mounts to any 3/4" fence to give you two universal T-Tracks parallel to your table surface.* Pre-drilled holes make installation to any subfence easy.* Made for use with Flip Stops (26991 and 31214) and T-Track Tape Measures (31193 and 32893).* Made of extruded aluminum.* 36" length.

    1 Review(s)
    $32.99
  4. 18" Universal Track for Magswitch Workholding System

    18" Universal Track for Magswitch Workholding System

    …Universal Track Attachment is for use with the Magswitch Workholding System. Mounts to the Universal Base and MagJigs (each sold separately). The Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own jigs, fixtures, stops, fences, zero-clearance fences and…

    $32.49
  5. Biesemeyer 18-901 Universal Drill Press Fence

    Biesemeyer 18-901 Universal Drill Press Fence

    …close them to lock the fence in position. Flip-down stop is also included, which can be lengthened or shortened depending on the orientation of the fence, and a scale is integrated to make setting the stop a snap.Fence body is 24"L x 2-1/2" x 1". Includes: * Fence body (24"L x 2-1/2" x 1")…

    $69.99
  6. Multi Track Brackets

    Multi Track Brackets

    …your Multi Tracks with these extruded aluminum brackets to form L-shaped fences. Center slots accept T-bolts (not included) to connect Multi Tracks to any built-in T-Track. Includes two brackets, eight 1/4"-20 bolts, eight washers, and eight T-Track nuts to secure brackets to Multi Tracks (35605,…

    $19.99
  7. 36" Universal Track for Magswitch Workholding System

    36" Universal Track for Magswitch Workholding System

    …Universal Track Attachment is for use with the Magswitch Workholding System. Mounts to the Universal Base and MagJigs (each sold separately). The Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own jigs, fixtures, stops, fences, zero-clearance fences and…

    $65.99
  8. T-Track Tape Measures

    T-Track Tape Measures

    …give you accurate measurements to 1/16" along your fence for on the fly adjustments and more. Use for setting up fence measurement from the edge of your blade or cutter. Ideal for use with all Universal T-Tracks, Multi Tracks, and Double T-Track Fence Caps. Each tape comes with an acrylic hairline…

    4 Review(s)
    From: $10.99
  9. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    …durability.* Low-profile miter track clamp locks in at any point along the miter track.* Also works great on the bandsaw as a single-point fence for cutting curved slats in multiples.* Adjusts from 1-3/8" away from your miter track to 5-11/16" away from your miter track, enough for the thinnest…

    104 Review(s)
    $26.99
  10. Toggle Clamp Mounting Plate

    Toggle Clamp Mounting Plate

    …it to get the most out of your toggle clamps and any workbenches, tables, jigs or surfaces with T-tracks. It's a great way to add a hold-down to fences with top-mounted T-tracks. The steel plate features adjustable slots to accommodate a wide variety of toggle clamps and comes complete with mounting…

    2 Review(s)
    $7.99
  11. Kreg™ 48'' Top Trak Fence

    Kreg™ 48'' Top Trak Fence

    …Trak Fence. This anodized aluminum extrusion features a self-aligning L-shaped mounting foot for easy installation to the top side of a shop-made 3/4" thick fence. Simply drill 1/8" holes through the back of the extrusion and secure with the included mounting screws. The top of the track also…

    $34.99
  12. Bench Dog® T-Loc Track

    Bench Dog® T-Loc Track

    This durable aluminum auxiliary track is perfect for shop-made fences, or anywhere you might run a variety of bolt-in-track accessories. It features Bench Dog's innovative Universal T-track, which accepts 1/4" and 5/16" T-bolts as well as 5/16" hex bolts. Mounting hardware not included.

    2 Review(s)
    $20.99
  13. Rockler Pro Router Table Fence

    Rockler Pro Router Table Fence

    …Table Fence is the perfect foundation for accuracy in virtually any router table operation. The two melamine-coated MDF fence faces are adjustable for low- and zero-clearance routing, while the front- and rear-facing universal T-tracks accept featherboards, stops, hold-downs, and more. The fence

    $139.99
  14. Rockler Tablesaw CrossCut Sled

    Rockler Tablesaw CrossCut Sled

    …platform and fence.* Aluminum fence measures 3"H x 25"L.* MDF fence face measures 2-7/8"H x 27"L.* MDF Fence face can be removed for replacement.* Spring-loaded ball bearings in the miter bar have adjustable tension to eliminate slop.* Adjustable 90° stop.* Requires standard miter track 3/4" w x…

    91 Review(s)
    $139.99
  15. Rockler 3'' Fence Flip Stop

    Rockler 3'' Fence Flip Stop

    …of the way when you don't! Slides up and down any fence with a top-mounted T-track and locks down with a comfortable 1" diameter knob. 5/16" T-bolt fits both standard and Universal T-tracks.* Also available: Rockler Flip Stop for 2-1/4" fences (31214).* The Flip Stop measures 3/4" wide, 1/2" thick,…

    4 Review(s)
    $16.99
  16. Bench Dog® Dual Track

    Bench Dog® Dual Track

    This durable aluminum auxiliary track features Bench Dog's innovative Universal T-track, which has a unique stacked-slot design that accepts any accessory with 1/4" T-bolts, 1/4" T-bolts, or 1/4" hex bolts. Perfect for tables, fences, and even jigs. In addition to the Universal T-track, Dual-Track…

    9 Review(s)
    $31.49
  17. Rockler Router Table Fence

    Rockler Router Table Fence

    …of the fence, and is perfect for attaching flip-down stops, hold-down clamps, or any other accessories with 1/4" T-bolts, 5/16" T-bolts, or 1/4" hex bolts. Two adjustable melamine-coated MDF faces round out this versatile, high-quality fence. Technical Details:* Ergonomic T-knobs for easy fence

    $84.99
  18. Rockler 17-Piece Universal T-Track Kit

    Rockler 17-Piece Universal T-Track Kit

    …5/16" T-bolts* Two 1" x 5/16" T-bolts* Two 1-1/2" x 5/16" T-bolts* Two 2-1/2" x 5/16" T-bolts* Four T-knobs* Four 5-star knobs Additional lengths of track are sold separately. For added versatility and functionality, combine T-Tracks with 5-1/2"L x 1-1/8"W Hold Down Clamps and 3-1/2"L x 3/4"W Hold…

    45 Review(s)
    $31.99
  19. Rockler 2-1/4'' Fence Flip Stop

    Rockler 2-1/4'' Fence Flip Stop

    Attaches to standard and universal T-tracks on 2-1/4" fences with included 5/16" T-boltand knob. Ideal for fences with top-mounted tracks. Set the stop at your desired measurement to create a square end for repeatable cuts and other tasks. Also available: Rockler Flip Stop for 3" fences (26991).

    9 Review(s)
    $16.99
  20. Rockler Adjustable Table Featherboard

    Rockler Adjustable Table Featherboard

    Table featherboard is designed to keep wood snug against fence for a safer and cleaner cut when ripping, routing, or drilling. Ideal for use with any tool that has a standard 3/8" x 3/4" miter slot. Expandable miter track bars provide maximum holding power. Features two easy-to-grip star knobs to…

    65 Review(s)
    $19.99
  21. Rockler High Pressure Laminate Router Table Top

    Rockler High Pressure Laminate Router Table Top

    Our High Pressure Laminate Router Table Tops have been newly redesigned with a dual-track miter slot in the table, and a whiter, brighter finish for improved visibility. The 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, such as the Incra gauge, while the adjacent…

    1 Review(s)
    $99.99
  22. Drill Press Fence Clamp

    Drill Press Fence Clamp

    All the components for a hold-down clamp that can be positioned along a T-slot or T-track in the fence of your drill press table. Each clamp comes with screws for mounting plus one mounting block, one 5/16" x 1" T-Bolt and one 1" Round 5/16"-18 Through Hole Knob.

    $18.99
  23. Bench Dog® Router Table Pro Fence 32''

    Bench Dog® Router Table Pro Fence 32''

    This 3-1/2" tall fence features a precision machined aluminum frame for total flatness, as well as Universal T-Tracks on both the front and back of the aluminum spine. These tracks, which are perfect for attaching featherboards, stops, hold-downs, and more, accept any accessory with 1/4" t-bolts,…

    1 Review(s)
    $159.99
  24. Kreg Flip Stop for Top Trak Fence

    Kreg Flip Stop for Top Trak Fence

    The Kreg Flip Stop mounts to the Top Trak Fence (26358, sold separately) to help you work more efficiently. It attaches to the T-track in the fence with a 1/4" hex bolt (included) and allows you to square an end of your workpiece and then cut it to length without having to move and reset the stop.…

    1 Review(s)
    $29.99
  • Items 1 - 24 of 72
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X