Fence Clamp

  • Items 1 - 24 of 83
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Universal Fence Clamps

    Rockler Universal Fence Clamps

    These compact, lightweight Fence Clamps allow you to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. The clamp arm simply fits into a 3/8" hole in the top of the auxiliary fence, keeping it out of the way. That means no…

    286 Review(s)
    $19.49
  2. Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …X 8" X 1 - 1/2"* Fence Clamps are made of rigid aluminum body with steel threaded components* Fence Clamps: Range of travel 1/2"-5-3/4" (1/2" minimum assumes a 3/4" auxiliary fence; you can clamp to an even thinner primary fence if you use a thicker auxiliary fence)* Auxiliary fences may need a 3/8"…

    14 Review(s)
    $29.99
  3. Biesemeyer 18-901 Universal Drill Press Fence

    Biesemeyer 18-901 Universal Drill Press Fence

    …to lock the fence in position. Flip-down stop is also included, which can be lengthened or shortened depending on the orientation of the fence, and a scale is integrated to make setting the stop a snap.Fence body is 24"L x 2-1/2" x 1". Includes: * Fence body (24"L x 2-1/2" x 1") * (2) Mounting clamp

    $69.99
  4. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    …inlay, bent laminations and more.* Solid phenolic for durability.* Low-profile miter track clamp locks in at any point along the miter track.* Also works great on the bandsaw as a single-point fence for cutting curved slats in multiples.* Adjusts from 1-3/8" away from your miter track to 5-11/16"…

    104 Review(s)
    $26.99
  5. Bessey Angle Clamp

    Bessey Angle Clamp

    …The clamp's maximum opening is 7/8" on one side and 2-1/2" on the other side for members of different thicknesses and 1-3/4" for members of equal thicknesses. Maximum thickness at the joint is 1-1/8". For added convenience use the Rockler Universal Fence Clamps to secure the Bessey Angle Clamp

    4 Review(s)
    $42.99
  6. Rockler Double T-Track Fence Cap

    Rockler Double T-Track Fence Cap

    Mounts to any 3/4" fence to give you two universal T-Tracks parallel to your table surface.* Pre-drilled holes make installation to any subfence easy.* Made for use with Flip Stops (26991 and 31214) and T-Track Tape Measures (31193 and 32893).* Made of extruded aluminum.* 36" length.

    1 Review(s)
    $32.99
  7. Magswitch Magnetic Jigs-Magswitch MagJigs

    Magswitch Magnetic Jigs-Magswitch MagJigs

    …turn! Unmatched speed, strength and precision in clamping, Magswitch MagJig Magnetic Clamps have revolutionized table top workholding in woodworking and industrial fixtures. Features fast, strong set up anywhere on a steel or cast iron table or fence. Technical Details:* For use on any ferromagnetic…

    11 Review(s)
    From: $27.99
  8. Rockler 45 Degree Miter Sled

    Rockler 45 Degree Miter Sled

    …allow you to securely clamp moldings at table level.* Can be easily drilled to add extended fences and stops.* High-impact polycarbonate ensures durability and low-friction sliding.* Fits a standard 3/8" x 3/4" miter slot.* Measures 5-1/2" in width and 10-3/8" in length. Clamping faces are 7-1/2"…

    85 Review(s)
    $25.99 $14.99

    SAVE 42%

  9. Rockler 52'' to 104'' Low Profile Straight Edge Clamp System

    Rockler 52'' to 104'' Low Profile Straight Edge Clamp System

    Ripping panels up to 104" long has never been easier! The 52" to 104" Low Profile Straight Edge Clamp does it all. Benefits:* Clamps for use as a straight edge with a router or circular saw* Add the T-fence and it becomes a T-square for laying out your project* Connect two 52" sections to create a…

    21 Review(s)
    $89.99 $67.49

    SAVE 25%

  10. All-In-One Low-Profile Contractor Clamps, New & Improved!

    All-In-One Low-Profile Contractor Clamps, New & Improved!

    …routers and as a fence for your table saw or drill press. A very low 17/32" profile body and flat top allow many applications without obstructing tools. Easy-to-read full color measuring scales enable outstanding accuracy anywhere along the clamp. Onboard T-Tracks fit select clamp accessories, sold…

    89 Review(s)
    From: $41.99
  11. Micro Adjuster for Router Table Fence

    Micro Adjuster for Router Table Fence

    fence for superior routing accuracy. Onboard clamp attaches to the router table and houses the finely threaded micro adjuster screw. Included rare earth magnet attaches to the reversible screw and attracts the metal fence tab. This allows push and pull adjustment from either side of the fence. A key…

    7 Review(s)
    $22.99
  12. Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    …place* Reversible guide rails have a smooth aluminum surface on one side and a rubber fence on the other for better gripping power* Includes two 5mm and two 1/4" indexing pins that eliminate the need for clamps and allow you to extend long rows of holes indefinitely* Included indexing pins store…

    $111.47
  13. Kreg Jig® HD Heavy-Duty Pocket Hole System

    Kreg Jig® HD Heavy-Duty Pocket Hole System

    …framing, deck railing, outdoor furniture, gazebos, swings, fences, trellises and anything else that will need to stand the test of time and the elements. The Kreg Jig HD is extremely portable for job-site use, simply slip your Kreg Face Clamp (sold separately, 26613), into the jig and lock it into…

    1 Review(s)
    $59.99
  14. Large Push Action Clamp

    Large Push Action Clamp

    Once attached to a bench or fixture, this clamp becomes a convenient hold down with 450 pounds of clamping power. Great for shop-made jigs, auxiliary fences or securing work pieces. Technical Details:* Bottom of rubber clamp foot adjusts from 3/8" above mounting surface to 5/8" below mounting…

    1 Review(s)
    $22.99
  15. Rockler Mini Clamp-It® Assembly Square

    Rockler Mini Clamp-It® Assembly Square

    …Boxes.* Manufactured from high impact, rigid polycarbonate.* Measures 4" x 4" x 1-1/4" square. Find the right Clamp-It® for every project! Also available from Rockler:* Clamp-It® Assembly Square* Clamp-It® Adjustable Assembly Square* Clamp-It® Assembly Square w/Universal Fence Clamps

    28 Review(s)
    $9.99 $4.99

    SAVE 50%

  16. 4-Piece Drill Press Accessory Kit

    4-Piece Drill Press Accessory Kit

    4-Piece Drill Press Accessory Kit includes everything you need to make drill press operations a breeze:* Drill Press Dust Port* 3 Stop Blocks. Each stop block contains:* #33695 - 5/16" x 1" T-Bolt* #34121 - 1" Round 5/16"-18 Through Hole Knob* Drill Press Table Clamp* Drill Press Fence Clamp

    12 Review(s)
    $47.99
  17. 6-Piece Router Table Accessory Kits

    6-Piece Router Table Accessory Kits

    …prevent kickback ensuring safety during routing. Two of the featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the table and keeps your work against the fence. Choose the Size Below that Best Fits Your Rockler Router Table Plate:* Standard Size:…

    1 Review(s)
    $49.99
  18. Rockler Clamp-It® Assembly Square

    Rockler Clamp-It® Assembly Square

    …fixed head with a comfortable ergonomic handle and a moveable tailpiece. Sold Separately Find the right Clamp-It® for every project! Also available from Rockler: * Clamp-It® Mini Assembly Square* Clamp-It® Adjustable Assembly Square* Clamp-It® Assembly Square w/Universal Fence Clamps

    110 Review(s)
    $12.99
  19. Micro Jig ZeroPlay™ Guide Bar System

    Micro Jig ZeroPlay™ Guide Bar System

    …of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly hardware as well as plans to build a table saw crosscutting jig with off cut deflector, jointing fence alignment jig for the router table, and hold-down clamps made from scrap materials.

    4 Review(s)
    $34.99
  20. Incra Miter 5000 Sled

    Incra Miter 5000 Sled

    …the sled for maxium accuracy and the cleanest cuts possible.* Renewable right panel provides zero-clearance tear-out control and cut-off support on both sides of the blade.* Two aluminum T-tracks are embedded in the MDF panel top to secure hold-down clamp and provide rigid support for the fence.

    7 Review(s)
    $299.99
  21. 36" Universal Track for Magswitch Workholding System

    36" Universal Track for Magswitch Workholding System

    …standard T-bolts and all 1/4" hex. The other side accepts all standard T-bolts, all 5/16" hex and Kreg® clamps.* Includes micro-adjustable brackets for fine tuning to 90 degrees.* Features core advantages of Magswitch, including fast, strong setup anywhere on a steel table or cast iron fence.

    $65.99
  22. Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    …25% larger than typical 1/4" bits, reduce chatter and fit all existing Rockler dovetail jigs.* Preset template and fence locations clearly marked for standard thickness stock.* Clamping bars include abrasive surface to grip stock and prevent slipping.* Depth gauge on template for setting dovetail…

    131 Review(s)
    $205.98
  23. Incra Miter Express Miter Sled

    Incra Miter Express Miter Sled

    …the extra holding power of the included hold-down clamps - adds stability and control.* Incra hold-down clamp keeps your fingers away from the blade when cutting small workpieces.* Includes outboard fence support that locks behind your fence in T- slot to provide even more rigidity for all…

    2 Review(s)
    $159.99
  24. Rockler 17-Piece Universal T-Track Kit

    Rockler 17-Piece Universal T-Track Kit

    …Two 1" x 5/16" T-bolts* Two 1-1/2" x 5/16" T-bolts* Two 2-1/2" x 5/16" T-bolts* Four T-knobs* Four 5-star knobs Additional lengths of track are sold separately. For added versatility and functionality, combine T-Tracks with 5-1/2"L x 1-1/8"W Hold Down Clamps and 3-1/2"L x 3/4"W Hold Down Clamps.

    45 Review(s)
    $31.99
  • Items 1 - 24 of 83
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X