Festool Chuck

  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
  1. Festool Centrotec® Chuck

    Festool Centrotec® Chuck

    …Centrotec System. Accessory Centrotec bits can be used both with the Centrotec chuck as well as non-Festool standard bit holders and chucks. Works with all existing and previous model Festool drills equipped with FastFix interface for toolless change of chucks: T+3, C12, TDK, TDD, CDD models.

    $35.00
  2. Festool FastFix® FX Right-angle Chuck

    Festool FastFix® FX Right-angle Chuck

    …tool. 1/4 inch hex drive with wire detent. Accepts Festool Centrotec or adjustable 1/2 inch chuck. Chuck rotates 360 degrees with 16 presets. Works with all existing and previous model Festool drills equipped with FastFix interface for toolless change of chucks: T+3, C12, TDK, TDD, CDD models.

    $120.00
  3. Festool FastFix® FX Eccentric Chuck

    Festool FastFix® FX Eccentric Chuck

    …The Festool FastFix Offset Chuck places bits flush to side, enabling close-quarters drilling and driving so you can place holes and fasteners near-perfectly adjacent to walls and into corners. Significantly faster and easier than the alternative of driving screws in tight spaces manually. Chuck

    $120.00
  4. Festool  .06''-.51''  Keyless Chuck for CDD Cordless Drills

    Festool .06''-.51'' Keyless Chuck for CDD Cordless Drills

    Standard keyless chuck with starting ring. Not compatible with FastFix® (FX) interface. Clamping range .06" -.51" (1.5 -13mm), with 1/2" -20 UNF thread.

    $50.00
  5. Festool .04''-.39'' Keyless Chuck for CDD Cordless Drills

    Festool .04''-.39'' Keyless Chuck for CDD Cordless Drills

    Standard keyless chuck. Not compatible with FastFix® (FX) interface. Clamping range .04" -.39" (1-10 mm), with 1/2" -20 UNF thread.

    $40.00
  6. Festool Centrotec® Starter Set

    Festool Centrotec® Starter Set

    …used both with the Centrotec chuck as well as non-Festool standard bit holders and chucks. Works with all existing and previous model Festool drills equipped with FastFix interface for toolless change of chucks: T+3, C12, TDK, TDD, CDD models. Includes Centrotec chuck, 4mm brad point drill bit, BH…

    $50.00
  7. Festool Centrotec® Hook Driver/ Adapter

    Festool Centrotec® Hook Driver/ Adapter

    …you to quickly and easily drive hooks with your cordless drill. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating…

    $16.00
  8. Festool Phillips Bits

    Festool Phillips Bits

    Number 2 Phillips with 1/4' hex shank and high-quality ZrN coating for durability. Can be used with standard bit holders and chucks.

    $10.00
  9. Festool C 15 Cordless Drill

    Festool C 15 Cordless Drill

    …charger. Combined with the Festool FastFix chuck system, the C 15 can do the job of 5 drills. All this plus Festool's intelligent battery charger that features an shut-off, preventing overcharging and dramatically shortening battery life. Three-year warranty. Festool offers a wide variety of…

    $460.00
  10. Festool CXS Li-Ion Cordless Drill

    Festool CXS Li-Ion Cordless Drill

    …accessories. Festool offers a wide variety of accessories for this product. From bits to optional chucks, see them all here. Technical Details:* Centrotec Chuck reduces nearly a half of a pound of weight and works well with standard 1/4-inch hex shank bits* Keyless Drill Chuck works with drill…

    $245.00
  11. Festool TI 15 Hybrid Impact Drill/Driver, Kit

    Festool TI 15 Hybrid Impact Drill/Driver, Kit

    …the Festool TI 15 lets you drive hugefasteners such as 10" lag bolts with practically zero effort in impact mode, thenpop on the standard drill/driver chuck for fine work, such as installing hingehardware on a jewelry box. Compatible with the full range of Festool's accessoryFastFix chucks, the…

    $525.00
  12. Festool Centrotec® Bit Holder BHS 65mm

    Festool Centrotec® Bit Holder BHS 65mm

    …with quick release collar enables use of standard wire detent bits with Centrotec Chuck. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer…

    $25.00
  13. Festool C 15 Cordless Drill Set

    Festool C 15 Cordless Drill Set

    …charger. Combined with the Festool FastFix chuck system, the C 15 can do the job of 5 drills. All this plus Festool's intelligent battery charger that features an shut-off, preventing overcharging and dramatically shortening battery life. Three-year warranty. Festool offers a wide variety of…

    $585.00
  14. Festool T 15+3 Cordless Drill Set

    Festool T 15+3 Cordless Drill Set

    …Independent Partner Resellers. Buy the complete Festool T15 + 3 set and get two additional FastFix chucks! With FastFix chucks, you'll seamlessly change a keyless chuck drill into a right angle drill or an offset drill. The FastFix right-angle chuck is the ultimate solution for close quarters hole…

    $585.00
  15. Festool CXS Li-Ion Cordless Drill Package

    Festool CXS Li-Ion Cordless Drill Package

    …accessories. Festool offers a wide variety of accessories for this product. From bits to optional chucks, see them all here. Technical Details:* Centrotec Chuck reduces nearly a half of a pound of weight and works well with standard 1/4-inch hex shank bits* Keyless Drill Chuck works with drill…

    $295.00
  16. Festool T15 Lithium Ion Cordless Drill (564521)

    Festool T15 Lithium Ion Cordless Drill (564521)

    Festool's T15 Cordless Drill delivers 14.4 volts of power to drive up to 730 screws on one charge, and it's ready to go again after just 70 minutes on the charger. Plus, the FastFix interchangeable chuck system lets you attach a range of optional chucks, including a right-angle or eccentric…

    $460.00
  17. Festool T18 Lithium Ion Cordless Drill (564523)

    Festool T18 Lithium Ion Cordless Drill (564523)

    …muscle with Festool's most powerful T-series cordless drill! The T18 Cordless Drill is capable of driving over 900 screws on just one charge. Plus, the FastFix interchangeable chuck system lets you attach a range of optional chucks, including a right-angle or eccentric chuck (sold…

    $510.00
  18. Festool Ti 15 Cordless Hybrid Impact Drill/Driver Basic (564526)

    Festool Ti 15 Cordless Hybrid Impact Drill/Driver Basic (564526)

    …the Festool TI 15 lets you drive huge fasteners such as 10'' lag bolts with practically zero effort in impact mode, then pop on the standard drill/driver chuck for fine work, such as installing hinge hardware on a jewelry box. Compatible with the full range of Festool's accessory FastFix chucks, the…

    $350.00
  19. Festool Ti 15 Cordless Hybrid Impact Drill/Driver (564525)

    Festool Ti 15 Cordless Hybrid Impact Drill/Driver (564525)

    …the Festool TI 15 lets you drive huge fasteners like 10'' lag bolts with practically zero effort in impact mode, then pop on the standard drill/driver chuck for fine work like installing hinge hardware on jewelry boxes. Compatible with the full range of Festool's accessory FastFix chucks, the TI…

    $525.00
  20. Festool Bit Holder/ Storage for CDD Cordless Drill

    Festool Bit Holder/ Storage for CDD Cordless Drill

    Space for four bits, bit holder, and chuck key.

    $3.99
  21. Festool T18 Lithium Ion Cordless Drill Set (564524)

    Festool T18 Lithium Ion Cordless Drill Set (564524)

    Boasts all of the 18V muscle of Festool's most powerful T-series cordless drill, plus two additional FastFix chucks, which let you seamlessly convert the T18 into a right angle drill or an offset drill. The right-angle chuck is the best choice for tight spaces where an ordinary drill would…

    $635.00
  22. Festool T15 Lithium Ion Cordless Drill Set (564522)

    Festool T15 Lithium Ion Cordless Drill Set (564522)

    The Festool T15 Set boasts all the benefits of the T15 drill, plus two additional FastFix chucks, which let you seamlessly convert the T15 into a right angle drill or an offset drill. The right-angle chuck is the best choice for tight spaces where an ordinary drill would not fit. Drill or drive…

    $585.00
  23. Festool 1'' Impact Hex Bit, Phillips #2, 5-Pack

    Festool 1'' Impact Hex Bit, Phillips #2, 5-Pack

    …such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with standardbit holders and chucks, and are also compatible with the Festool Centrotec bitholder…

    $15.00
  24. Festool 1'' Impact Hex Bit, Torx #40, 5-Pack

    Festool 1'' Impact Hex Bit, Torx #40, 5-Pack

    …such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with standardbit holders and chucks, and are also compatible with the Festool Centrotec bitholder…

    $16.00
  • Items 1 - 24 of 29
  • Page:
    1. 1
    2. 2
Feedback X