Festool Guide Rail Router

  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
  1. Festool OF 1010 EQ 1-1/2 HP Router with T-Loc Systainer (574339)

    Festool OF 1010 EQ 1-1/2 HP Router with T-Loc Systainer (574339)

    …will fine tune your setting to the nearest 0.001" for the cleanest, most precise joints imaginable. Included guide rail attachment allows you to use the router with Festool guide rails for dadoes, edge jointing and more. Accepts 1/4" and 8mm collets (included). Includes T-Loc Systainer #3. * True…

    $435.00
  2. Guide Stop for Festool OF 1400 EQ Router

    Guide Stop for Festool OF 1400 EQ Router

    Maximize the versatility of your Festool Router and Guide Rail System! Use the Guide Stop to adapt the Festool OF 1400 Router for use with the FS Guide Rail System for perfectly guided, straight routing. The OF 1400 Guide Stop features fine-adjustment controls, allowing you to precisely adjust the…

    $50.00
  3. Guide Stop for Festool OF 2000 E Router

    Guide Stop for Festool OF 2000 E Router

    Use this guide stop to attach a guide rail system to your Festool OF 2000 E router. It includes an integral fine adjustment system, as well as a support to offset the guide rail's height.

    $64.00
  4. Festool Guide Rail Accessory Kit with New T-Loc Systainer

    Festool Guide Rail Accessory Kit with New T-Loc Systainer

    …value of your FS guide rails when used with your Festool plunge saw or router. Quickly set angles for both mitered and compound cuts using the Angle Unit. Make accurate repeat cuts using the Limit Stop. Work more efficiently by attaching the included Deflector to the end of your rail to prevent your…

    1 Review(s)
    $210.00
  5. Festool Hole Drill Set with T-Loc Systainer

    Festool Hole Drill Set with T-Loc Systainer

    …possible only with large stationary equipment. For use with the Festool OF 1010 router and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately), to cover any size job. Set Includes:* Guide plate * Centering mandrel* 2 edge stops* 2 linear stops* 2…

    $495.00
  6. Edge Stop for Festool LR 32 Guide Rail

    Edge Stop for Festool LR 32 Guide Rail

    For parallel alignment of LR 32 guide rail. Includes stop and sliding stop flag.

    $68.00
  7. Festool Guide Rail for LR 32 Hole Drilling System

    Festool Guide Rail for LR 32 Hole Drilling System

    …35mm cup hinges. As part of an integrated system, it also can be used with Festool plunge saws and jigsaws for expanded capability. Features:* Hard-anodized surface.* Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action.* Integrated splinterguard aligns…

    $315.00
  8. Festool Guide Rails

    Festool Guide Rails

    …cuts! With the correct Festool Guide Stop, they can work with Festool routers, plunge cut saws, jig saws and more. Technical Details:* Hard-anodized surface* Soft, non-slip coating* Hard rubber splinter guard* Mounting slot for: FSW angle unit, Connector for Guide Rails (482107), FSZ clamps, FS-AW…

    From: $80.00
  9. Guide Stop for Festool OF 1010 Router

    Guide Stop for Festool OF 1010 Router

    Replacement Guide Stop for use with the OF 1010 Router and FS Guide Rail System. Maximize the versatility of your Festool Router and Guide Rail System! Use the Guide Stop to adapt the Festool OF 1010 Router for use with the FS Guide Rail System for perfectly guided, straight routing. The Guide Stop…

    $40.00
  10. Connector for Festool Guide Rails

    Connector for Festool Guide Rails

    Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connectors. Connectors fit in integrated guide rail T-slots for secure cutting. Includes 1 connector (2 are needed). Can also be used to connect the Festool MFS templates.

    2 Review(s)
    $17.00
  11. Replacement Sliding Stop Flag for Festool LR 32 Guide Rail System

    Replacement Sliding Stop Flag for Festool LR 32 Guide Rail System

    Replacement sliding stop for edge stop used with LR 32 guide rail.

    $31.00
  12. Replacement Support for Festool OF 1010 Router

    Replacement Support for Festool OF 1010 Router

    Replacement support for Of 1010 router prevents router from tipping when used with guide rail. Acts as outrigger, offsets guide rail height.

    $6.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
Feedback X