Festool Ts

  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
Related Categories: Festool Saw | Ts 55 | Festool | Festool Table | Festool Ts55 | Mft | Mft 3 | Ts55
  1. Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    The Festool TS 55 has become iconic in the woodworking world as the "table saw that fits in your hand", and the TS 55 REQ adds many refinements to the original. The first difference you'll notice is the flat saw housing, which allows you to cut within 1/2" of walls and other…

    1 Review(s)
    $615.00
  2. Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    The TS 75 is a plunge-action circular saw that performs like a high-quality table saw, yielding the cleanest, most precise cuts imaginable in an ultra-compact system. It features more power and greater cutting depth than the smaller TS 55, plus added safety features. Designed to work with Festool's

    $725.00
  3. Festool MFT/3 Multi Functional Table

    Festool MFT/3 Multi Functional Table

    …highly accurate 180° Angle Fence and integrated Guide Rail System combine to create an absolutely precise cross-cutting setup when used with Festool's TS Series saws. The Guide Rail also adjusts to allow cuts up to 3" deep and 27" wide-an impossible feat with even the largest miter saws. All…

    $645.00
  4. Parallel Edge Guide for Festool TS 75 EQ Circular Saw

    Parallel Edge Guide for Festool TS 75 EQ Circular Saw

    Parallel Edge Guide enables guided, parallel cutting with the TS 75 Plunge Cut Saw. Can be used for parallel rip cutting with the TS saw, independent of the FS guide rails. Attaches to both sides of the saw for short side or broad side cuts. Rip capacity from the blade side up to 11 13/16in (300mm),…

    $62.00
  5. Waste Side Splinterguard for Festool TS 55 REQ, 5-Pack

    Waste Side Splinterguard for Festool TS 55 REQ, 5-Pack

    …of five. * Use with the Festool TS 55 REQ (45959, sold separately).* When used with a Festool Guide Rail, the guard allows you to achieve splinter-free cuts on both sides of the blade.* For best results, replace splinterguard when changing blade kerf sizes.* Not compatible with TS 55 EQ or TS 75 EQ.

    $20.00
  6. Parallel Guide for Festool TS 55 Circular Saw

    Parallel Guide for Festool TS 55 Circular Saw

    Parallel Edge Guide enables guided, parallel cutting with the TS 55 Plunge Cut Saw. Can be used for parallel rip cutting with the TS saw, independent of the FS guide rails. Attaches to both sides of the saw for short side or broad side cuts. Rip capacity from the blade side up to 11 13/16in (300mm),…

    $62.00
  7. Festool TS 55 Universal Circular Saw Blade (495376)

    Festool TS 55 Universal Circular Saw Blade (495376)

    Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Universal General Purpose blade for the TS 55 Plunge Cut Saw is a clean-cutting general purpose blade for wood and soft plastics, and serves as a fine-rip cutting blade…

    $52.00
  8. Fine Tooth Saw Blade for Festool TS 75 EQ

    Fine Tooth Saw Blade for Festool TS 75 EQ

    Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft…

    $120.00
  9. Panther Saw Blade for Festool TS 75 EQ

    Panther Saw Blade for Festool TS 75 EQ

    Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Panther Ripping blade for the TS 75 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft…

    $73.00
  10. Festool TS 55 Fine Tooth Circular Saw Blade

    Festool TS 55 Fine Tooth Circular Saw Blade

    Tungsten-Carbide, ATB saw blade for fine cross cuts in sheet goods, melamine, hard and soft woods. 48 teeth.

    $73.00
  11. Festool Aluminum/Plastic Cutting Blade for TS 55

    Festool Aluminum/Plastic Cutting Blade for TS 55

    Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Aluminum/Plastic Cutting blade for the TS 55 Plunge Cut Saw is designed to cut non-ferrous materials, especially aluminum; also useful for acrylics and hard plastics.…

    0 Review(s)
    $94.00
  12. Festool Plug-it Cable, 4m (490656)

    Festool Plug-it Cable, 4m (490656)

    Replacement power cord for TS 55 and TS 75. Works on all Festool tools with Plug-it connect. Convenient 13' length.

    $44.00
  13. Festool Tool Glide Strip for Festool Guide Rails

    Festool Tool Glide Strip for Festool Guide Rails

    Replacement PTE plastic Glide Strip for FS Guide Rails. Allows your TS saw to glide smoothly and consistently over the guide rail. The Glide Strip provides a slightly elevated, ultra low-friction surface for the saw to ride on, eliminating friction from contact with the guide rail, as well as the…

    $35.00
  14. Splinterguards for Festool Plunge Cut Saws

    Splinterguards for Festool Plunge Cut Saws

    …side splinterguard in conjunction with the integrated guide rail splinterguard. For best results, replace Splinterguard when switching between different kerf blades. Splinterguards attach easily to both the TS 55 and TS 75 Plunge Cut Saws. Includes 5 Splinterguards and 1 replacement thumbscrew.

    $21.00
  15. Festool 18-Gauge Plug-it Cable, 13 Ft. (490649)

    Festool 18-Gauge Plug-it Cable, 13 Ft. (490649)

    Replacement 18-gauge power cord is 13 feet long. Delivered as standard equipment with jigsaws, MFK 700 router, Domino joiner, and sanders (note: 16-guage cord is required for use with TS Plunge Cut saws as well as OF 1010 and OF 1400 Routers).

    $42.00
  16. Saw Blade Panther, ATF 55 (495372)

    Saw Blade Panther, ATF 55 (495372)

    Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Panther Ripping blade for the TS 55 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft…

    $45.00
  17. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    …binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. The LU79R006M20 blade will fit the Festool TS-55 saw family, the DeWalt DWS520 track saw, and Makita SP600K track saw.

    5 Review(s)
    From: $52.47
  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
Feedback X