Festool Guide Rail

  • Grid List
  • Page:
    1. 1
  • Items 1 - 18 of 18
  • Page:
    1. 1
  1. Festool Guide Rails

    Festool Guide Rails

    …cuts! With the correct Festool Guide Stop, they can work with Festool routers, plunge cut saws, jig saws and more. Technical Details:* Hard-anodized surface* Soft, non-slip coating* Hard rubber splinter guard* Mounting slot for: FSW angle unit, Connector for Guide Rails (482107), FSZ clamps, FS-AW…

    From: $95.00
  2. Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    Festool TS 55 REQ Plunge Cut Saw with 55" Guide Rail (561556)

    …further enhances extraction efficiency, so you can work right in the customer's space, with less clean-up. Other features: * When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts (on both sides of the cut).* The TS 55 makes the actual cut right on the edge of…

    1 Review(s)
    $615.00
  3. Festool Guide Rail Tote Bag

    Festool Guide Rail Tote Bag

    …investment in Festool Guide Rails with the durable nylon Carrying Case for Festool Guide Rails. For convenient and protected transport or storage of up to two FS 1400/2 or shorter guide rails. Durable nylon construction protects your guide rails from scratches and dings. Guide rails sold separately.

    $95.00
  4. Festool Hole Drill Set with T-Loc Systainer

    Festool Hole Drill Set with T-Loc Systainer

    …possible only with large stationary equipment. For use with the Festool OF 1010 router and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately), to cover any size job. Set Includes:* Guide plate * Centering mandrel* 2 edge stops* 2 linear stops* 2…

    $495.00
  5. Guide Rail Clamps for Festool Guide Rails

    Guide Rail Clamps for Festool Guide Rails

    …as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction table and can…

    From: $42.00
  6. Connector for Festool Guide Rails

    Connector for Festool Guide Rails

    Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connectors. Connectors fit in integrated guide rail T-slots for secure cutting. Includes 1 connector (2 are needed). Can also be used to connect the Festool MFS templates.

    2 Review(s)
    $17.00
  7. Splinter Guards for Festool Guide Rails

    Splinter Guards for Festool Guide Rails

    Festool FS Guide Rails are available in two different lengths from 55 inches to 197 inches, providing the right length for straight, splinterfree cutting. The integrated splinterguard is a critical guide rail system component, and after some time and heavy use, will need to be replaced. Replace your…

    1 Review(s)
    $40.00
  8. Festool Parallel Guides 495717 for Guide Rail System

    Festool Parallel Guides 495717 for Guide Rail System

    …the guide rail for each cut. Festool Parallel Guides can be used with any Festool FS/2 Guide Rail (sold separately). Festool Parallel Guide Extensions (sold separately, 46708) for cuts less than 7-11/16". Technical Details:* The Festool Parallel Guide System greatly enhances the standard Guide Rail

    $270.00
  9. Festool OF 1010 EQ 1-1/2 HP Router with T-Loc Systainer (574339)

    Festool OF 1010 EQ 1-1/2 HP Router with T-Loc Systainer (574339)

    …will fine tune your setting to the nearest 0.001" for the cleanest, most precise joints imaginable. Included guide rail attachment allows you to use the router with Festool guide rails for dadoes, edge jointing and more. Accepts 1/4" and 8mm collets (included). Includes T-Loc Systainer #3. * True…

    $435.00
  10. Festool Guide Rail Accessory Kit with New T-Loc Systainer

    Festool Guide Rail Accessory Kit with New T-Loc Systainer

    …includes a Festool item of $150 or more in value! Special shipping charges will apply for Express delivery and heavy/oversized items. Not valid at Rockler Retail stores or Independent Partner Resellers. A complete kit to maximize the value of your FS guide rails when used with your Festool plunge…

    1 Review(s)
    $210.00
  11. Waste Side Splinterguard for Festool TS 55 REQ, 5-Pack

    Waste Side Splinterguard for Festool TS 55 REQ, 5-Pack

    …splinterguard is flat, it need not be removed when making bevel cuts. Sold in packs of five. * Use with the Festool TS 55 REQ (45959, sold separately).* When used with a Festool Guide Rail, the guard allows you to achieve splinter-free cuts on both sides of the blade.* For best results, replace…

    $20.00
  12. Festool MFT/3 Multi Functional Table

    Festool MFT/3 Multi Functional Table

    …clamping configurations, while a highly accurate 180° Angle Fence and integrated Guide Rail System combine to create an absolutely precise cross-cutting setup when used with Festool's TS Series saws. The Guide Rail also adjusts to allow cuts up to 3" deep and 27" wide-an impossible feat with…

    $645.00
  13. Festool MFT/3 Multifunction Table - Basic

    Festool MFT/3 Multifunction Table - Basic

    …a Festool item of $150 or more in value! Special shipping charges will apply for Express delivery and heavy/oversized items. Not valid at Rockler Retail stores or Independent Partner Resellers. Due to customer demand, the MFT/3 is now being offered as a basic unit without the guide rail system.…

    $545.00
  14. Festool Parallel Guide Extension Set

    Festool Parallel Guide Extension Set

    …to 195mm). The Extensions must be used in conjunction with the Parallel Guide. The Parallel Guide can be used with any length Festool FS/2 guide rail. Please note that the Parallel Guide components do not include a guide rail. This system performs as well as a table saw for most cutting jobs —…

    $325.00
  15. Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    …on the guide rail.* Simple, accessible blade height adjustment with one sliding indicator and built in scale.* Lightweight cast aluminum magnesium base.* Full-length channel beneath the guide rail accepts clamps for obstruction-free clamping. Clamps sold separately in the Festool FS/2 Guide Rail

    $725.00
  16. Deflector for Festool Guide Rails

    Deflector for Festool Guide Rails

    …efficiently by preventing your suction hose and cords from getting snagged on the end of your guide rail by attaching the Hose and Cord Deflector. Quickly and easily attaches to the end of the guide rail without the need for tools. Features wings on the outside edges to help keep the hose and cord…

    $20.00
  17. Festool Carvex Accessory Kit

    Festool Carvex Accessory Kit

    …Jigsaw.* Also allows you to use the Carvex with a Festool Guide Rail (sold separately). Circle Cutter (497304)* Used to make precise circle and arc cuts.* Extends for circles between 4-3/8-inch and 9' 10-1/8-inch in diameter.* Guide Rail Base (Festool #497303) is included.* Radius blade retracts for…

    $200.00
  18. Splinterguards for Festool Plunge Cut Saws

    Splinterguards for Festool Plunge Cut Saws

    Achieve splinterfree cuts on both sides of the blade by using the off-cut side splinterguard in conjunction with the integrated guide rail splinterguard. For best results, replace Splinterguard when switching between different kerf blades. Splinterguards attach easily to both the TS 55 and TS 75…

    $21.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 18 of 18
  • Page:
    1. 1
Feedback X