Finger

  • Items 1 - 24 of 129
  • Page:
    1. 1
    2. 2
    3. 3
  1. Flexx-Rap® Finger Protection Wrap

    Flexx-Rap® Finger Protection Wrap

    Flexible wrap helps protect fingers from burns and blisters, plus improves grip.* Simply wrap tape around the joint of any finger; release tension on the last section of wrap and press firmly against the underlying wrap to keep it in place.* 1" wide x 5 yards per roll.* Contains natural rubber…

    1 Review(s)
    $20.99
  2. Rockler Quick-Release Bar Clamp Rack

    Rockler Quick-Release Bar Clamp Rack

    Shop-made clamp racks tend to fall apart over time, especially if the clamps are spaced close together, with narrow "fingers" in between. This unit is fabricated from sturdy galvanized steel to prevent just that problem. Because of the steel, it can pack up to 15 quick-release bar clamps into a…

    1 Review(s)
    $15.99
  3. Leigh Super 12'' Dovetail Jig

    Leigh Super 12'' Dovetail Jig

    …easily and accurately. Infinitely adjustable one-piece fingers are easily positioned for any joint pattern, and you are always guaranteed a half pin at each edge of the joint. Rout half-blind pin boards and tail boards at the same time. The finger assembly can also produce two sizes of box joints,…

    3 Review(s)
    $269.00
  4. Leigh R9 Plus Joinery System

    Leigh R9 Plus Joinery System

    Create through dovetails and finger joints on boards of any width with the Leigh R9 Plus Joinery System! The R9 Plus helps you do it quickly and with precision. And with dependable Leigh quality, you know you'll get pins and tails that fit perfectly every time! Features a template designed to be…

    7 Review(s)
    $169.00
  5. Bench Dog 3-Piece Safety Kit

    Bench Dog 3-Piece Safety Kit

    …Kit! Includes a Feather-Loc that prevents kickback by keeping stock tight against your fence; a Magnetic Push Stick that keeps your hands and fingers a safe distance from the blade, then stores easily using the built-in magnet; and a Ultra Push-Bloc that gives you all the gripping power you need…

    2 Review(s)
    $29.99
  6. Thumb and Finger Guards

    Thumb and Finger Guards

    Thumb and Finger Guards (sold individually) are leather with elastic backs for a snug and comfortable fit. Protect your fingers from cuts, nicks, and scratches without interfering with the dexterity required for intricate carving techniques. Technical Details* Made of rough suede leather* One size…

    4 Review(s)
    $4.99
  7. Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    With its multiple interlocking fingers, this bit creates maximum gluing surface area for superior edge joints and splice joints. The fingers have a wedged shape, which when clamped together, helps to close up the joint without any gaps. 3/4" guide bearing.

    1 Review(s)
    $89.99
  8. 5-Star Jig Knobs

    5-Star Jig Knobs

    Five-star knobs are the true Lincolns of jig knobs. With their rounded edges, comfortable finger holds and smooth finish, they're extremely easy on the hands and provide plenty of torque for use as jig knobs on fixtures, router tables, drill presses and more. These 5-Star Knobs are available with a…

    12 Review(s)
    From: $1.99
  9. Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    …your hands alone and more accurate and more precise than with conventional push blocks. The results will be better projects with less waste and fingers intact. With its 3-Directional control, it gives you downward, forward, and lateral pressure on the stock for maximum control and safety. It's…

    25 Review(s)
    $59.99
  10. Gorilla Gripper Plywood Carrier

    Gorilla Gripper Plywood Carrier

    …incredible leverage and ultra-grippy pads won't slip, even on melamine. And with the load bearing down on your palm rather than straining at your fingers in a lower position, it's much easier on the muscles of your hand. Also great for sliding panels out of a vertical storage rack! Made in the USA.…

    6 Review(s)
    $52.49
  11. Folding Shelf Brackets-Select Option

    Folding Shelf Brackets-Select Option

    …where you want a work surface that can be folded down and out of the way when not in use. Spring-loaded, one-handed release lever keeps hands and fingers from getting pinched. Adjustable to four positions: 90°, 80°, 70° and 0° (closed). Available in two lengths. Zinc-coated steel…

    26 Review(s)
    From: $26.99
  12. FastCap Dually Double-Sided Plastic Grommets

    FastCap Dually Double-Sided Plastic Grommets

    When you need a grommet to look good on both sides, turn to the FastCap Dually. The two ends of the Dually wedge together with finger pressure, leaving a neat, finished ring on both sides. Double-sided grommets are ideal for vertical cabinet partitions, or for eye level shelves or desktops that are…

    From: $2.99
  13. Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    …for accurate repetitive ripping of your thin stock. Ideal for thin stock hold down or in/out feed on a table saw. Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts. This tool features core advantages of Magswitch including fast, strong set up…

    $21.99
  14. Micro Jig Splitter™ SteelPRO System, Thin Kerf

    Micro Jig Splitter™ SteelPRO System, Thin Kerf

    …piece by the thousands on an inch. This will virtually eliminate any chance of kickback on the table saw and greatly reduce the chance of severing fingers. For Thin Kerf, range of 0.090"-0.118"The splitters are simple to install and simple to use. We include an easy to follow drill-guide template to…

    3 Review(s)
    $39.99
  15. Nova Finger Grind Jig

    Nova Finger Grind Jig

    Use the Nova Finger Grind Jig with an ordinary 6" or 8" bench grinder for excellent sharpening results without the high cost. The jig uses an extruded aluminum base with a quick cam lock release that allows you to quickly dial in the angle of your grind. The ball and socket fitting pivots smoothly,…

    $84.99
  16. Fein MultiMaster Carbide Finger Rasp

    Fein MultiMaster Carbide Finger Rasp

    For rough sanding of filler, tile adhesives, concrete, stone and wood. The finger shape, coated on both sides, is especially well suited for artistic work.

    $24.99
  17. Fein MultiMaster Sanding Finger Pads

    Fein MultiMaster Sanding Finger Pads

    For use in extremely tight and hidden spots, in channels, grooves, openings, folds and joints. Also for mould-making, in concave and convex forms.

    1 Review(s)
    $24.99
  18. Amerock Inspirations Finger Pull, BP1583-EB

    Amerock Inspirations Finger Pull, BP1583-EB

    * Finish: Elegant Brass* Base Material: Zinc* Length: 1-7/8 inch* Width: 1-1/16 inch* Projection: 1-1/16 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $5.69
  19. Amerock Inspirations Finger Pull, BP1583-ORB

    Amerock Inspirations Finger Pull, BP1583-ORB

    * Finish: Oil Rubbed Bronze* Base Material: Zinc* Length: 1-7/8 inch* Width: 1-1/16 inch* Projection: 1-1/16 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $5.69
  20. Amerock Inspirations Finger Pull, BP1583-WID

    Amerock Inspirations Finger Pull, BP1583-WID

    * Finish: Wrought Iron Dark* Base Material: Zinc* Length: 1-7/8 inch* Width: 1-1/16 inch* Projection: 1-1/16 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $5.69
  21. Amerock Inspirations Finger Pull, BP1583-WN

    Amerock Inspirations Finger Pull, BP1583-WN

    * Finish: Weathered Nickel* Base Material: Zinc* Length: 1-7/8 inch* Width: 1-1/16 inch* Projection: 1-1/16 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $5.69
  22. Amerock Inspirations Finger Pull, BP1593-FB

    Amerock Inspirations Finger Pull, BP1593-FB

    * Finish: Flat Black* Base Material: Zinc* Length: 1-7/8 inch* Width: 1-1/16 inch* Projection: 1-1/16 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $5.69
  23. Amerock Inspirations Weathered Brass Finger Pull, BP1583-R2

    Amerock Inspirations Weathered Brass Finger Pull, BP1583-R2

    The classic hand-forged look of the frontier, rooted in traditional styles from the late 19th and early 20th centuries.* Finish: Weathered Brass* Base Material: Zinc* Length: 1-7/8 inch* Width: 1-1/16 inch* Projection: 1-1/16 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included*…

    $4.99
  24. Amerock Inspirations Satin Nickel Finger Pull

    Amerock Inspirations Satin Nickel Finger Pull

    The classic hand-forged look of the frontier, rooted in traditional styles from the late 19th and early 20th centuries.* Finish: Satin Nickel* Base Material: Zinc* Length: 1-7/8 inch* Width: 1-1/16 inch* Projection: 1-1/16 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included*…

    $5.99
  • Items 1 - 24 of 129
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X