Finger Joint Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
  1. Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    With its multiple interlocking fingers, this bit creates maximum gluing surface area for superior edge joints and splice joints. The fingers have a wedged shape, which when clamped together, helps to close up the joint without any gaps. 3/4" guide bearing.

    1 Review(s)
    $89.99
  2. Rockler Dovetail Miter Bars

    Rockler Dovetail Miter Bars

    …your jig firmly to the work surface for precision, consistency and repeatability where lifting is a concern. Whether you're cutting box joints, finger joints or thickness planing with a router, adding a Dovetail Miter Bar to your jig will increase accuracy and reduce production time. The uses of…

    $18.99 $9.99

    SAVE 47%

  3. Rockler Dovetail Router Bits - 1/4" Shank

    Rockler Dovetail Router Bits - 1/4" Shank

    …and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints for table and leg extensions, or sliding drawer and shelf runners and dividers. Smaller degree bits can be used for stair tread stringer mortising or shelf supports. Larger diameter bits can produce unique finger pulls.

    2 Review(s)
    From: $13.99
  4. Rockler Dovetail Router Bits - 1/2" Shank

    Rockler Dovetail Router Bits - 1/2" Shank

    …and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints for table and leg extensions, or sliding drawer and shelf runners and dividers. Smaller degree bits can be used for stair tread stringer mortising or shelf supports. Larger diameter bits can produce unique finger pulls.

    2 Review(s)
    From: $14.99
  5. Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    The interlocking fingers of our Lock Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased…

    From: $57.99
  6. Grr-Rip Block™ Smart Hook Push Block

    Grr-Rip Block™ Smart Hook Push Block

    …not needed.* Use the 90° flip guide for veneers or resawing on band saws.* 90° flip guide also functions as a guard to protect your fingers from bits and blades.* Gravity Heels still engage while the GRR-RIP BLOCK is in vertical position for superior control.* Comfortable ergonomic handle.*…

    2 Review(s)
    $29.95
  7. Leigh Super 12'' Dovetail Jig

    Leigh Super 12'' Dovetail Jig

    …twist of the E Bush changes it's active diameter which in turn changes the fit of finger joints and half-blind dovetails.Standard Equipment:* 1/2" 8° dovetail bit* 1/2" 14° dovetail bit* 5/16" straight bit* 1/2" to 8mm collet reducer* Sliding dovetail fence* Square drive screwdriver* Cam…

    3 Review(s)
    $269.00
  8. Leigh Super 18'' Dovetail Jig

    Leigh Super 18'' Dovetail Jig

    …twist of the E Bush changes it's active diameter which in turn changes the fit of finger joints and half-blind dovetails. Standard Equipment:* 1/2" 8° dovetail bit* 1/2" 14° dovetail bit* 5/16" straight bit* 1/2" to 8mm collet reducer* Sliding dovetail fence* Square drive screwdriver* Cam…

    3 Review(s)
    $389.00
  9. Leigh Super 24'' Dovetail Jig

    Leigh Super 24'' Dovetail Jig

    …twist of the E Bush changes it's active diameter which in turn changes the fit of finger joints and half-blind dovetails. Standard Equipment:* 1/2" 8° dovetail bit* 1/2" 14° dovetail bit* 5/16" straight bit* 1/2" to 8mm collet reducer* Sliding dovetail fence* Square drive screwdriver* Cam…

    1 Review(s)
    $479.00
  10. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    fingers let you cut multiple joints in virtually any layout, in stock up to 24" wide. Mortises and tenons can be cut in sizes from a delicate 5/16" x 5/8" to a muscular 1-1/2" x 2-1/2". The M2 can also be used as a custom finger joint jig for producing large scale, variably spaced finger joints from…

    $268.99
  11. Leigh D4R Pro 24" Dovetail Jig

    Leigh D4R Pro 24" Dovetail Jig

    …fixed integral stops to ensure joint alignment and non-marring textured clamping surfaces.* Quick-acting cams secure the work for precise machining. Built-in scales provide rapid and accurate fine adjustment for stock thickness and through-dovetail fit.* The finger assembly is removable and flips…

    10 Review(s)
    $579.00
  12. Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    …fixed integral stops to ensure joint alignment and non-marring textured clamping surfaces.* Quick-acting cams secure the work for precise machining. Built-in scales provide rapid and accurate fine adjustment for stock thickness and through-dovetail fit.* The finger assembly is removable and flips…

    10 Review(s)
    $799.00
  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
Feedback X