Finish Head Screws

  • Items 1 - 24 of 45
  • Page:
    1. 1
    2. 2
  1. Trim Head Square Drive Screws-Select size

    Trim Head Square Drive Screws-Select size

    This screw has the low profile of a finishing nail and the holding power of a screw. Small 3/16" head uses #1 driver. Black finish. 100 per bag Optional Bin Boxes are available with your order.

    4 Review(s)
    From: $6.29
  2. Pan Head Face Frame Screw-Coarse Face Frame

    Pan Head Face Frame Screw-Coarse Face Frame

    These coarse face frame screws are designed to eliminate splitting and features a chrome/zinc finish. Square drive head has a flat bearing surface, semi-elliptical top and self-tapping wood auger tip. It is designed to eliminate splitting. Heat treated pan head screw uses a #2 square drive. 100 per…

    5 Review(s)
    From: $4.29
  3. Jet® 13'' Planer/Molder with Closed Stand

    Jet® 13'' Planer/Molder with Closed Stand

    …the table * Three cutter head design produces a superior finish in either application* Two speed gear box has feed rates set for optimum planning and molding results* Molding cutter head accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing…

    1 Review(s)
    $1119.99
  4. Pan Head Face Frame Screw-Fine Face Frame Screws

    Pan Head Face Frame Screw-Fine Face Frame Screws

    These fine face frame screws are designed to eliminate splitting and features a chrome/zinc finish. Square drive head has a flat bearing surface, semi-elliptical top and self-tapping wood auger tip. It is designed to eliminate splitting. Heat treated pan head screw uses a #2 square drive. 100 per…

    5 Review(s)
    From: $3.99
  5. Nickel Crib Hardware Kit

    Nickel Crib Hardware Kit

    …Plan with Fixed Sides (30704, sold separately). Includes mattress spring, cylinder nuts, connector bolts, hex key wrench, hex-head machine screws, height-adjustment brackets, wood screws and clear teething rail. Nickel finish. Also available in white, brown and brass finishes (all sold separately).

    $138.59
  6. Kreg® Coarse/Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#8 Screws

    Kreg® Coarse/Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#8 Screws

    …tip.* The square drive washer head properly seats the screw in the bottom of the pocket hole, preventing the head from crushing the pocket in softer woods and particle board.* The auger points provide for easy installation and minimal splitting.* The zinc finish reduces friction for easy…

    20 Review(s)
    From: $3.59
  7. 3/8'' Brass Hole Plugs, 8-Pack

    3/8'' Brass Hole Plugs, 8-Pack

    …Whether calling attention to a pinned tenon or simplycapping a screw, the resulting look is the same: a neat, rounded metal accent.These 3/8" hole plugs are available in three different finishes for a pleasingcontrast with the finish on your project: solid brass, black anodized aluminumand stainless…

    $5.99
  8. Solid Brass Quadrant Hinges, Pair

    Solid Brass Quadrant Hinges, Pair

    These elegant quadrant hinges are crafted from solid brass, and finished with an attractive antique hue that complements a variety or wood species and styles. The integral stop arm holds your lid open at approximately 95°. Sold in pairs. Available in large and small sizes. Made in USA. Technical…

    $9.99
  9. Painted Head Screws-Select Option

    Painted Head Screws-Select Option

    #10 x 3" painted truss head screws are ideal for installing white melamine, painted plywood or natural woods. 25 Per Pack. Chip-resistant white or tan finishes are ideal for installing white melamine, painted plywood or natural woods. Large truss head hides rough screw hole edges. Deep threads hold…

    1 Review(s)
    $7.19
  10. 3/8'' Stainless Steel Hole Plugs, 8-Pack

    3/8'' Stainless Steel Hole Plugs, 8-Pack

    …Whether calling attention to a pinned tenon or simplycapping a screw, the resulting look is the same: a neat, rounded metal accent.These 3/8" hole plugs are available in three different finishes for a pleasingcontrast with the finish on your project: solid brass, black anodized aluminum, and…

    $9.99
  11. Kreg Jig® HD Screws-Kreg Jig® HD Screws

    Kreg Jig® HD Screws-Kreg Jig® HD Screws

    …Designed for use with the Kreg Jig® HD Heavy Duty Pocket Hole System (#46791, sold separately).* #3 square drive screw head also accepts Phillips head.* 2-1/2" long #14 screws.* Hardened steel.* Protec-Kote™ finish with 3 anti-corrosion layers ensures a long life in outdoor environment.

    2 Review(s)
    From: $4.99
  12. 3/8'' Black Anodized Aluminum Hole Plugs, 8-Pack

    3/8'' Black Anodized Aluminum Hole Plugs, 8-Pack

    …Whether calling attention to a pinned tenon or simplycapping a screw, the resulting look is the same: a neat, rounded metal accent.These 3/8" hole plugs are available in three different finishes for a pleasingcontrast with the finish on your project: solid brass, black anodized aluminum and…

    $8.99
  13. Stainless Steel Finishing Washers

    Stainless Steel Finishing Washers

    These stainless steel finishing washers provide a clean, finished look, as well as a secure connection when paired with flat-head or oval-head screws. The contoured shape of the finishing washer provides a neat nest for the screw to sit in, eliminating the sharp edges that would result from using an…

    $1.29
  14. Kreg® Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#7 Screws

    Kreg® Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#7 Screws

    …this fine thread screw.* The square drive washer head properly seats the screw in the bottom of the pocket hole, preventing the head from crushing the pocket in softer woods and particle board.* The auger points provide for easy installation and minimal splitting.* The zinc finish reduces friction…

    21 Review(s)
    From: $4.49
  15. Drawer Slide Mounting Screws Truss Head/Phillips

    Drawer Slide Mounting Screws Truss Head/Phillips

    …stay where they're supposed to with these Drawer Slide Mounting Screws! Features a truss head/Phillips that gives you non-slip fastening and Phillips for convenience. * Comes in packs of 100* Screw Size: #8 x 1/2"* Screw Finish: Black Technical Details: * For ball bearing slides and catches (roller…

    $4.19
  16. Drawer Front Adjustment Screws

    Drawer Front Adjustment Screws

    …adjusting hole. Square-x heads. Zinc finish.* Type-17 point helps screw penetrate solid wood drawer fronts.* With Lo Root thread design for substantial holding power and #2 Square-X heads.* Uses #2 Square-Drive or phillips bits.* Zinc finish.* 100 screws per pack. Washer head screw for drawer front…

    2 Review(s)
    From: $5.19
  17. Slide Mounting Screws

    Slide Mounting Screws

    …with guide operation.* Thread design gives you substantial holding power in the mating material.* #2 Square-X drive.* Can also be used to attach brackets, shelf supports and more.* Available in lube finish and zinc finish.* 100 screws per pack. Other Recommendations:* Large Round Washer Head Screws

    4 Review(s)
    $5.19
  18. Powermatic 201 Planer, 7.5HP 1PH 230V

    Powermatic 201 Planer, 7.5HP 1PH 230V

    …board planing* 4-knife head offers 19,200 cuts per minute and widest capacity in its class* Roller bearing-mounted feed rollers for long life* Adjustable bed rollers allow smooth feeding of rough or finished workpieces* Oversized cast iron table travels on 2 large lead screws for heavy duty support*…

    $6259.99
  19. 3/8" Diameter Bed Bolt

    3/8" Diameter Bed Bolt

    …which fits the bed bolts snugly to avoid damaging the hardware. Bed Bolts: * Bolts constructed of steel with black anodized finish* 6" overall length including head * 3/8" Diameter Bolt * 3/8"-16 threads on half the length of the bolt * Bolt includes associated nut Bed Bolt Wrench: * Fastens…

    6 Review(s)
    $7.99
  20. Bed Bolt Wrench

    Bed Bolt Wrench

    …which fits the bed bolts snugly to avoid damaging the hardware. Bed Bolts:* Bolts constructed of steel with black anodized finish* 6" overall length including head* 3/8" Diameter Bolt* 3/8"-16 threads on half the length of the bolt* Bolt includes associated nutBed Bolt Wrench:* Fastens tightly…

    6 Review(s)
    $18.99
  21. Replacement Head for Robert Sorby TurnMaster System w/o Cutter

    Replacement Head for Robert Sorby TurnMaster System w/o Cutter

    …replacement head for the Robert Sorby TurnMaster line of turning tools (e.g 46653, sold separately). The head accepts a variety of interchangeable cutters, and can be rotated to three indexed positions: centered for shaping, and left and right shear for finishing. If desired, multiple heads can also…

    1 Review(s)
    $27.99
  22. Starrett® 6'' Combination Square with Square Head

    Starrett® 6'' Combination Square with Square Head

    …in 1/8" and 1/16" on one side of blade. Quick reading in 1/32" and 1/64" on other side.* Reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads.* Cast-iron head with black finish.* Made in USA.

    7 Review(s)
    $92.99
  23. Amerock Allison Value Hardware Lion Head Pull

    Amerock Allison Value Hardware Lion Head Pull

    * Finish: Antique Brass* Base Material: Zinc* Length: 2-1/8 inch* Width: 1-3/8 inch* Projection: 9/16 inch* Backplate measures 1-3/8 inch high x 1-1/8 inch wide.* Knob Diameter: 1 inch* Machine Screw Thread Size: 1 x #8 32 x 1 inch* Screws are included* Warranty: Lifetime

    $2.69
  24. Classic Oblong Catches-Select finish

    Classic Oblong Catches-Select finish

    …and large boxes. Non-locking design features a guarded draw bolt and crimped wire loop to latch your lid closed. Technical Details* Made of copper-coated steel with nickel (26450) or brass (26443) finish* 1-1/2" wide x 2-3/4" high* 7/16" projection* Includes #5 x 1/2" round head mounting screws

    10 Review(s)
    $5.29
  • Items 1 - 24 of 45
  • Page:
    1. 1
    2. 2
Feedback X