Finishing Saw Blade

  • Items 1 - 24 of 92
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    …coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring…

    1 Review(s)
    From: $49.47
  2. Irwin 10" x 80T Marathon® Trim/Finish Saw Blade

    Irwin 10" x 80T Marathon® Trim/Finish Saw Blade

    This blades features micro-grain C3 tungsten carbide tips for long life, and #400 grit diamond-ground teeth for fast, clean cuts. The thin kerfs mean less waste and less work for your saw, and fully hardened plates keep the blades running truer, longer. Features specially engineered heat vents to…

    1 Review(s)
    $52.49
  3. Laguna ProForce 3/4" Band Saw Blade

    Laguna ProForce 3/4" Band Saw Blade

    …this Laguna ProForce 3/4" Band Saw Blade! With 3 teeth per inch, it slices through any stock, helping you make accurate straight cuts and light curves on finished stock or stretch your woodworking dollars by creating your own lumber. Available in 105" or 125". These blades are inspected individually…

    From: $31.50
  4. Irwin 10" x 50T Marples ATB+R Combination Saw Blade

    Irwin 10" x 50T Marples ATB+R Combination Saw Blade

    …Table Saw, Miter Saw. About IRWIN Blades: IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are…

    7 Review(s)
    $44.99
  5. Irwin 10" x 60T Marples ATB+R Crosscut Saw Blade

    Irwin 10" x 60T Marples ATB+R Crosscut Saw Blade

    …kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish

    $54.99
  6. Irwin 10" x 40T Marples ATB General Purpose Saw Blade

    Irwin 10" x 40T Marples ATB General Purpose Saw Blade

    …kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish

    $39.99
  7. Irwin 10" x 80T Marples HI-ATB Crosscut Saw Blade

    Irwin 10" x 80T Marples HI-ATB Crosscut Saw Blade

    …kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish

    $59.99
  8. Irwin 10" x 84T Marples TCG Laminate Saw Blade

    Irwin 10" x 84T Marples TCG Laminate Saw Blade

    …kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish

    $69.99
  9. Irwin 10" x 24T Marples ATB Rip Saw Blade

    Irwin 10" x 24T Marples ATB Rip Saw Blade

    …kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish

    $34.99
  10. Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    Olson® All Pro™ Band Saw Blade Assortment, 93-1/2''

    …Band Saw Blade 93-1/2"* 3/16" width can cut a 3/8" radius circle!* 10 TPI offers the cleanest finish and the ability to cut thin stock.* Minimum material thickness of 5/16".* Maximum material thickness of 3".* Regular tooth - excellent chip carrying capacity in narrow bands. 1/4" Wide Band Saw Blade

    4 Review(s)
    $52.49
  11. Freud® 10" x 80T Industrial Double Sided Laminate/Melamine Saw Saw Blade - LU97M010

    Freud® 10" x 80T Industrial Double Sided Laminate/Melamine Saw Saw Blade - LU97M010

    blades needed with this blade! The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw

    2 Review(s)
    $94.97
  12. Freud® LU94M Industrial Plastic Saw Blades

    Freud® LU94M Industrial Plastic Saw Blades

    This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting. By combining micrograin carbide tips with a specially modified triple chip grind these blades will give a clean smooth cut. These blades produce less heat keeping the cut edge crisp. The…

    From: $61.47
  13. Freud® LU72M Industrial General Purpose Saw Blades

    Freud® LU72M Industrial General Purpose Saw Blades

    …surface finish may occur. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $54.97
  14. Freud® LU85R Industrial Ultimate Cut-Off Saw Blades

    Freud® LU85R Industrial Ultimate Cut-Off Saw Blades

    …that resonates in standard blades, producing glass-smooth finishes. With a finish this perfect you won't need stabilizers. The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume…

    1 Review(s)
    From: $71.47
  15. Rockwell Sonicrafter® Rigid Scraper Blade

    Rockwell Sonicrafter® Rigid Scraper Blade

    Use the RW8921 rigid scraper blade to scrape paint, finishes, and adhesives, as well as to remove old vinyl and other floor coverings. Ideal for refinishing projects when removing coatings, residues, and layers of paint or caulk. Also cuts carpet. Designed for use with Rockwell Sonicrafter®…

    $7.99
  16. Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    …pitch and debris build-up on the blade. Also available as a thin kerf blade. Technical Details* Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut - extending blade life, and giving a crisp, swirl-free flawless finish* The combination of unique design and…

    8 Review(s)
    $99.97
  17. Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    …pitch and debris build-up on the blade. Also available as a standard kerf blade. Technical Details* Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut - extending blade life, and giving a crisp, swirl-free flawless finish* The combination of unique design…

    8 Review(s)
    $79.97
  18. Freud® 10" x 30T Industrial Glue Line Rip Saw Blade - LM74M010

    Freud® 10" x 30T Industrial Glue Line Rip Saw Blade - LM74M010

    …gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there…

    $62.97
  19. Freud® 10" x 30T Industrial Thin Kerf Glue Line Rip Saw Blade - LM75R010

    Freud® 10" x 30T Industrial Thin Kerf Glue Line Rip Saw Blade - LM75R010

    …with a superior finish and long cutting life.* Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.* Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.* Precision-tensioned blade bodies made of high…

    4 Review(s)
    $59.97
  20. Freud® 10" x 72T Industrial Solid Surface Saw Blade - LU95M010

    Freud® 10" x 72T Industrial Solid Surface Saw Blade - LU95M010

    …polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor. Also available with the premium Perma-SHIELD® coating. Technical Details * Special side-grind tooth design enables blade to remain cool while…

    $117.97
  21. Coping Saw and Blades-Select Option

    Coping Saw and Blades-Select Option

    …Coping Saw uses standard 6-1/2" long pinned end coping saw blades. Blades are made from the finest hardened and tempered spring or high carbon steel. Precision punched or milled teeth for accurate sawing, smooth finish and longer life. #99855 Assorted Blades, contains 1 each of 4 blades.* .125"W x…

    3 Review(s)
    From: $6.99
  22. Freud LU91R Thin Kerf Sliding Compound Miter Saw Blades

    Freud LU91R Thin Kerf Sliding Compound Miter Saw Blades

    …industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring…

    6 Review(s)
    From: $63.97
  23. Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    …industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring…

    From: $55.47
  24. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. The LU79R006M20 blade will fit the Festool TS-55 saw family, the DeWalt DWS520 track saw, and Makita…

    5 Review(s)
    From: $52.47
  • Items 1 - 24 of 92
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X