Flip Stop

  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
  1. Rockler 2-1/4'' Fence Flip Stop

    Rockler 2-1/4'' Fence Flip Stop

    Attaches to standard and universal T-tracks on 2-1/4" fences with included 5/16" T-boltand knob. Ideal for fences with top-mounted tracks. Set the stop at your desired measurement to create a square end for repeatable cuts and other tasks. Also available: Rockler Flip Stop for 3" fences (26991).

    9 Review(s)
    $16.99
  2. Rockler 3'' Fence Flip Stop

    Rockler 3'' Fence Flip Stop

    …fence with a top-mounted T-track and locks down with a comfortable 1" diameter knob. 5/16" T-bolt fits both standard and Universal T-tracks.* Also available: Rockler Flip Stop for 2-1/4" fences (31214).* The Flip Stop measures 3/4" wide, 1/2" thick, and 3" high on the back or short side of the arm.

    4 Review(s)
    $16.99
  3. Kreg Flip Stop for Top Trak Fence

    Kreg Flip Stop for Top Trak Fence

    …Kreg Flip Stop mounts to the Top Trak Fence (26358, sold separately) to help you work more efficiently. It attaches to the T-track in the fence with a 1/4" hex bolt (included) and allows you to square an end of your workpiece and then cut it to length without having to move and reset the stop. It…

    1 Review(s)
    $29.99
  4. T-Track Tape Measures

    T-Track Tape Measures

    …T-Track Fence Caps. Each tape comes with an acrylic hairline indicator with adhesive backing that can be attached to Rockler Flip Stops (26991 and 31214) or other homemade stops. The 48" steel rule can be cut to fit the 36" plastic extrusion depending on your needs. Cut your steel measure for either…

    4 Review(s)
    From: $10.99
  5. Multi Track for Jigs and Custom Fences-Multi Track

    Multi Track for Jigs and Custom Fences-Multi Track

    …and fixtures. Once assembled, the multiple tracks give you countless options for attaching stops, hold-downs, sub-fences and more. Available in 2-1/4" and 3" heights. Multi Track Brackets and Flip Stops sold separately. Technical Details:* Universal T-tracks accept all three major accessory…

    6 Review(s)
    From: $28.99
  6. Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

    …integral stops to ensure joint alignment and non-marring textured clamping surfaces.* Quick-acting cams secure the work for precise machining. Built-in scales provide rapid and accurate fine adjustment for stock thickness and through-dovetail fit.* The finger assembly is removable and flips to…

    10 Review(s)
    $799.00
  7. Rockler Double T-Track Fence Cap

    Rockler Double T-Track Fence Cap

    Mounts to any 3/4" fence to give you two universal T-Tracks parallel to your table surface.* Pre-drilled holes make installation to any subfence easy.* Made for use with Flip Stops (26991 and 31214) and T-Track Tape Measures (31193 and 32893).* Made of extruded aluminum.* 36" length.

    1 Review(s)
    $32.99
  8. Self-Adhesive Hairline Indicator

    Self-Adhesive Hairline Indicator

    …black line to mark the measurement value at any given position along a tape.* They are self-adhesive for quick application and made of clear acrylic.* Indicators can be affixed to Flip Stops (31214 or 26991, sold separately) or other stops to slide along measuring devices.* Two indicators per pack.

    $3.99
  9. Laguna Tools Platinum Series Universal Sliding Table System

    Laguna Tools Platinum Series Universal Sliding Table System

    …legs: 2* Miter gauge length: 31" (787 mm)* Miter gauge extension: 10" (total length 41") 254 mm (total length 1041 mm)* Miter gauge stops: +45°, 90°, -45°* Miter gauge range: +50° to -50°* Miter gauge flip stops: 1* Table fixing method: 3 fixing bolts* Weight: 62 lbs. (31 kg.)

    $695.00
  10. Kreg™ Precision Measuring Systems Kit

    Kreg™ Precision Measuring Systems Kit

    …self-adhesive tapes, flipstop, production stop and mounting hardware.* Flipstop has curved front edge that elevates when a board is pushed into the stop arm - perfect for squaring the end of a board before flipping it to cut to length.* Production stop features dual cursors for use on either side…

    $124.00
  11. Portable Cross Cut Sled with FREE Cutoff Platform

    Portable Cross Cut Sled with FREE Cutoff Platform

    …fence.* MDF Fence face can be removed for replacement.* Nylon set screws in the miter bar are adjustable to eliminate slop.* Adjustable 90° stop.* Requires standard miter track (3/4" wide x 3/8" deep)* Note: For compatibility, the right edge of your table saw's left-hand miter track (in which…

    1 Review(s)
    $148.98 $119.99

    SAVE 19%

  12. Kreg™ 48'' Top Trak Fence

    Kreg™ 48'' Top Trak Fence

    …with the included mounting screws. The top of the track also contains a recess for attaching a self-adhesive 1/2" measuring tape (sold separately). Use with the Kreg Flip Stop for Top Trak Fence (21938, sold separately) to square an end of your stock and cut it to length without moving the stop.

    $34.99
  13. Biesemeyer 18-901 Universal Drill Press Fence

    Biesemeyer 18-901 Universal Drill Press Fence

    …integrated to make setting the stop a snap.Fence body is 24"L x 2-1/2" x 1". Includes: * Fence body (24"L x 2-1/2" x 1") * (2) Mounting clamp assemblies* Low-profile flip stop assembly* High-profile flip stop assembly* Knurled thumb screw for high-profile flip stop extension Note: This drill press…

    $69.99
  14. Kreg® Klamp Table KKS1000

    Kreg® Klamp Table KKS1000

    …square frames with this innovative assembly table. Simply slide your parts against the stops, clamp in place and drive your screws! Aluminum Klamp Trak features a channel that accepts sliding Klamp Block stops and Bench Klamps (Klamp Table includes 2 Bench Klamps). Adjustable Klamp Blocks quickly…

    1 Review(s)
    $249.00
  15. Kreg™ Precision Miter Gauge System

    Kreg™ Precision Miter Gauge System

    Positive stops at 0°, 10°, 22-1/2°, 30° and 45° - and micro-adjustability to 1/100° - give you speed, repeatability and the same accuracy that machine shops strive for!* Add to that the perfect, repeatable dimensions you'll get from the precision flip stop, and you can say…

    13 Review(s)
    $139.00
  16. Kreg Toolboxx w/Pocket Hole Start Up Kit

    Kreg Toolboxx w/Pocket Hole Start Up Kit

    …how you ever got along without it. Kreg Large Toolboxx™: With removable bins for screws, fixed storage compartments for drill bits,drivers and stop collars, and a vast storage space below for jigs, clamps and drillguides, the Kreg Toolboxx is more than capable of housing your entire KregPocket…

    $106.00
  17. Fence Stop for FastCap® Best Fence System

    Fence Stop for FastCap® Best Fence System

    stop for the Best Fence lets you place the stop anywhere you want with precision and ease. A magnifying glass is built in so reading the tape measurements is easy. Stops can be lifted up and out of the way when not needed, and flipped back down without losing your measurement. Calibrating the stop

    $49.99
  18. Festool Domino® Cross Stop for DF500/DF700 Joiners

    Festool Domino® Cross Stop for DF500/DF700 Joiners

    …Attaches easily and securely to both ends of your Domino Joiner with simplecam levers.* Converts easily to fit either Domino's offset by flipping the pin.* This version of the Cross Stop replaces the older 493488, which came with theDF500 set. The older version does not work with the XL DF700.

    $68.00
  19. Incra® Miter 1000SE with Telescoping Fence

    Incra® Miter 1000SE with Telescoping Fence

    …from 18" to a full 31" length.* Flip Shop Stop has patented saw tooth rack system that instantly controls the length of your cut. Dual flip arms, equipped with three sliding stop rods, operate independently or in tandem for one, two or three simultaneious stop positioner setups. Made of solid…

    6 Review(s)
    $159.99
  20. Rockler Router Table Fence

    Rockler Router Table Fence

    …surface for straight, consistent routing. The top-mounted Universal T-track runs the length of the fence, and is perfect for attaching flip-down stops, hold-down clamps, or any other accessories with 1/4" T-bolts, 5/16" T-bolts, or 1/4" hex bolts. Two adjustable melamine-coated MDF faces round out…

    $84.99
  21. Incra Miter 1000HD Miter Gauge

    Incra Miter 1000HD Miter Gauge

    …180 positive stops for pin-point accuracy at every degree (with special stops at +/-22.5°), plus a micro-adjustable vernier scale for fine-tuning to 1/10°. Add to that the industry's smoothest adjustable miter bar, a telescoping fence, a premium dual-arm flip stop, and superior duplicating…

    23 Review(s)
    $189.99
  22. Incra Miter 5000 Sled

    Incra Miter 5000 Sled

    …Incra incremental angle control delivers perfect, repeatable accuracy.* Includes 36"-64" telescoping miter fence and dual flip stop.* With 364 precision indexed angle stops over +/-90° to produce perfect, gap-free miter joints on any multi-sided object.* Will crosscut a 25" W board with full…

    7 Review(s)
    $299.99
  23. Leigh Y-Axis Mortise Guides

    Leigh Y-Axis Mortise Guides

    Use your Leigh FMT to flip your mortises on their sides! Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90° to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x…

    $29.99
  24. Powermatic® Tilt Table Mortiser w/Stand

    Powermatic® Tilt Table Mortiser w/Stand

    stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35°. The table can also move left to right and forward and back on dovetail ways with the large handwheel controls. Adjustable linear stops and flip down stop

    1 Review(s)
    $1,274.99
  • Items 1 - 24 of 34
  • Page:
    1. 1
    2. 2
Feedback X