Flush

  • Items 1 - 24 of 290
  • Page:
    1. 1
    2. 2
    3. 3
  1. Flush Hinge

    Flush Hinge

    Eliminate the gap created by most hinges on drop leaf tables. Provides a snug fit between table halves and leaves in any position.* Use on 3/4" wood only.* Sold in pairs.

    3 Review(s)
    $10.39
  2. Fein Flush Cut Wood Saw Blade, Segment, 3-5/16''

    Fein Flush Cut Wood Saw Blade, Segment, 3-5/16''

    Designed to make perfectly flush cuts in soft woods or other soft materials. Low profile center allows for operation flat against the surface, making it ideal for cutting door jambs in flooring or removing window putty. Blade is segmented for easier 90° cuts.

    1 Review(s)
    $5.99
  3. Adjustable Flush Mount

    Adjustable Flush Mount

    Forgives for installations a little bit off. These adjustable range flush mount make wall hung cabinets or panels easy to line up thereby saving you time and frustration. 3/8" side to side adjustability makes this support easy to line up. Heavyweight steel for durability. 3/4" x…

    12 Review(s)
    $4.79
  4. Extra Thin Flush Mount, 1-1/2'' x 1-3/4''

    Extra Thin Flush Mount, 1-1/2'' x 1-3/4''

    An interlocking hanger bracket for hanging vanity cases, wall units, and mirrors. One piece fits into the other to form a solid streamline interlocking mount that measures 1/8" thick. Technical Details:* Can be used individually for small hangings or for wide wall hangings, multiple mounts are…

    $3.99
  5. Piloted Flush Trim Bits 1/4" Shank

    Piloted Flush Trim Bits 1/4" Shank

    …rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked…

    From: $15.99
  6. FastCap Flexible Flush Cut Saw

    FastCap Flexible Flush Cut Saw

    Difficult trim cuts are a thing of the past with the Pocket Pull Saw. The super-thin, razor-sharp blade flexes to give you easy access to even the tightest spots. Technical Details:* 18 TPI blade* Only .015" thin* Stays locked when open* Folds for easy storage while protecting the blade and keeping…

    6 Review(s)
    $10.49
  7. 2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, figured…

    13 Review(s)
    $34.99
  8. Extra Thin Flush Mount, 1'' x 1''

    Extra Thin Flush Mount, 1'' x 1''

    An interlocking hanger bracket for hanging vanity cases, wall units, and mirrors. One piece fits into the other to form a solid streamline interlocking mount that measures 1/8" thick. Technical Details:* Can be used individually for small hangings or for wide wall hangings, multiple mounts are…

    23 Review(s)
    $3.49
  9. Taper Connectors-Choose size

    Taper Connectors-Choose size

    Ideal bed rail fasteners. Excellent for very strong invisible joints. Also great for hanging wall units. Technical Details:* Only 1/4" deep for easy flush mounting.* Extra heavy gauge cold rolled steel.* 5/8" wide.* Price per pair

    7 Review(s)
    From: $2.99
  10. Keyhole Fittings-Select either single or double

    Keyhole Fittings-Select either single or double

    …or double keyhole designs. Technical Details * Made from 1/16" thick plated steel * Can be mounted in a recess for hanging articles completely flush with a wall * Item #28837 single fitting is 5/8" wide x 1-21/32" long * Item #28829 double fitting is 9/16" wide x 3" long * Both single and double…

    11 Review(s)
    From: $1.99
  11. Freud Downshear Helix Flush Trim Bits

    Freud Downshear Helix Flush Trim Bits

    These bits are ideal for trimming 3/4" material flush with a substrate—shelf caps with shelves and face frames with cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free,…

    3 Review(s)
    From: $32.97
  12. Flush Cutting Trim Saw

    Flush Cutting Trim Saw

    This saw is the perfect tool to trim dowels and pocket-hole plugs down to surface level. Its 6" long blade has a 20 tpi tooth configuration and is able to flex and bend to get the closest possible cut. The teeth have no side set and won't mar adjacent surfaces. A beautiful Rosewood handle fits…

    8 Review(s)
    $25.99
  13. Heavy-Duty Mirror and Picture Hanger, 6''

    Heavy-Duty Mirror and Picture Hanger, 6''

    Secure heavy artwork flush to your wall safely, easily, and with very little gap using Heavy Duty Mirror and Picture Hangers from Hangman! The 6" hanger holds up to 75 lbs. And installation is easy! Includes two interlocking brackets; one is attached to your artwork, the other to the wall. The…

    $7.99
  14. 2'' Z-Clips - Pack of 10 Sets

    2'' Z-Clips - Pack of 10 Sets

    Hang heavy items securely and flush to your wall with easy-to-use Z-shaped, aluminum clips! The clips provide a secure mount for wall panels, partitions, frames, cabinets, and more. Once installed, clips wedge together to lock panels in place. To disengage panels, simply lift and remove! Each clip…

    $16.99
  15. Rockler Pattern Flush Trim Bits for Plunge Routers

    Rockler Pattern Flush Trim Bits for Plunge Routers

    The bearing guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way).…

    1 Review(s)
    From: $27.59
  16. Piloted Flush Trim Bit

    Piloted Flush Trim Bit

    Piloted Flush Trim Bit

    $34.99
  17. Flush Panel Retainers

    Flush Panel Retainers

    Flush Mount Retainers are constructed of tan plastic with a countersink hole for flathead wood screws. Surface mounting style used to hold glass or panels in rabbet flush to inner surface of door frames. Good for brass grill or glass installation. Permits easy removal of panels from frame. Use 1/2"…

    22 Review(s)
    $2.79
  18. Flush End Cap-Polished Brass

    Flush End Cap-Polished Brass

    Finishes off railing end. Measurements (for use with 1-1/2" inch tubing):* diameter(D): 1-1/2"* height(H): 1/8"Measurements (for use with 2" inch tubing):* diameter(D): 2"* height(H): 1/8"

    From: $6.09
  19. Rockler Flush Door Trimming Bit

    Rockler Flush Door Trimming Bit

    With a full 2" of carbide, this bit is ideally suited for trimming thick entry doors, interior doors and countertops. It features a top-mounted guide bearing, which lets you use templates on the top side. This means better visibility when hand-holding the router. The bit is 3/4" in diameter, and…

    6 Review(s)
    $44.99
  20. 45 Degree Flush Elbow-Polished Brass

    45 Degree Flush Elbow-Polished Brass

    A 45° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-15/16"* length(L): 3"Measurements (for use with 2"…

    From: $28.99
  21. 90 Degree Flush Elbow-Polished Brass

    90 Degree Flush Elbow-Polished Brass

    A smooth 90° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-1/4"* length(L): 2-1/4"Measurements (for use…

    From: $19.49
  22. Half Mortise Flush Mount Lock

    Half Mortise Flush Mount Lock

    Mounts from backside for low profile appeal.* Made from brass plated steel, it is suitable for use on doors.* No escutcheon provided.* Requires a 2-1/8" L x 1-1/8" D x 3/8" mortise.* No strike plate is necessary.* Two keys provided.* Keyed alike.

    $40.99
  23. Flush Pull, HH-D - Mirror

    Flush Pull, HH-D - Mirror

    * Materials: Face Plate: 316 Stainless Steel* Backing: ABS Plastic* Supplied with stainless steel screws (M4x14) (M4x10)* Note: See HH-DS Series for all-stainless steel model. * Catalog Page (PDF format)

    $34.99
  24. Flush End Cap-Polished Stainless Steel

    Flush End Cap-Polished Stainless Steel

    Finishes off railing end. Measurements (for use with 1-1/2" inch tubing):* diameter(D): 1-1/2"* height(H): 1/8"Measurements (for use with 2" inch tubing):* diameter(D): 2"* height(H): 1/8"

    From: $9.59
  • Items 1 - 24 of 290
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X