Flush Cut Router Bit

  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
  1. Piloted Flush Trim Bits 1/4" Shank

    Piloted Flush Trim Bits 1/4" Shank

    …these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with…

    From: $15.99
  2. Freud Top and Bottom Bearing Flush Trim Router Bits

    Freud Top and Bottom Bearing Flush Trim Router Bits

    …for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held routers, laminate trimmers, and table-mounted portable routers.

    From: $34.47
  3. 2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain,…

    13 Review(s)
    $42.99
  4. Freud Top Bearing Flush Trim Router Bits

    Freud Top Bearing Flush Trim Router Bits

    …bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as…

    From: $22.97
  5. Piloted Flush Trim Bits 1/2" Shank

    Piloted Flush Trim Bits 1/2" Shank

    …these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with…

    $27.99 From: $18.99

    SAVE 32%

  6. Freud # 42-114 Bearing Flush Trim Bits, 1/2" Dia. x 1-1/2" H x 1/2" Sh.

    Freud # 42-114 Bearing Flush Trim Bits, 1/2" Dia. x 1-1/2" H x 1/2" Sh.

    …tops and doing pattern work, these are the bits to rely on for a smooth, burn-free cut. Two flutes offer fast chip ejection, while the carbide ensures a long life of precise flush cuts.* Cuts all composition materials, plywoods, hardwoods,and softwoods.* Use on portable or table-mounted routers.

    $20.97
  7. 1/2'' Pattern Router Bit

    1/2'' Pattern Router Bit

    With its 1/4" maximum depth of cut, this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it…

    5 Review(s)
    $18.99
  8. 2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, figured…

    13 Review(s)
    $34.99
  9. Pattern Flush Trim Router Bit- 1/2 Inch Shank

    Pattern Flush Trim Router Bit- 1/2 Inch Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  10. Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height

    Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height

    …tolerances, this bit is ideal for pattern or template cutting. Since the bearing is top-mounted, the template is also top-mounted, and you get a clear view of the cut line. Of course, it also doubles as a 3/4" dado bit, and can be used to trim veneers and other laminates flush with the substrate.…

    21 Review(s)
    $26.99
  11. Freud Downshear Helix Flush Trim Bits

    Freud Downshear Helix Flush Trim Bits

    These bits are ideal for trimming 3/4" material flush with a substrate—shelf caps with shelves and face frames with cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free,…

    3 Review(s)
    From: $32.97
  12. Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors

    Large Trim Router Bit Kit, 1" Dia. x 2" L, for 2" Thick Doors

    …a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be used as a double-bearing flush trim bit, as two bearings are included for that purpose. Capable of trimming stock up to 2" thick.…

    5 Review(s)
    $89.99
  13. Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors

    Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors

    …a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be used as a double-bearing flush trim bit, as two bearings are included for that purpose. Capable of trimming stock up to 1" thick.…

    5 Review(s)
    $49.99
  14. Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)

    Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99 $15.39

    SAVE 30%

  15. Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/2" Shank

    Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/2" Shank

    …to emphasize a seam than to try to hide it. This bit does just that, applying a neat decorative V-groove along the line of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush trim bit, you also cut down on a lot of sanding. Just a pass or two with…

    $22.99
  16. Freud # 91-103 5-Piece Introductory Router Bit Set, 1/2'' Shank

    Freud # 91-103 5-Piece Introductory Router Bit Set, 1/2'' Shank

    …portable routers.* Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD® Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and precision-ground for the smoothest possible cuts. 1/2" Flush Trim Router Bit:*

    $98.97
  17. Routers and Router Tables (Book)

    Routers and Router Tables (Book)

    …to:* Cut edge profiles, joinery, and curves quickly and cleanly.* Create flawless moldings.* Make perfect raised-panel doors.* Create elegant furniture parts* Repeat shapes consistently, quickly and precisely.Table of Contents: Introduction Part One - Routers and Bits * How Many Routers Does Your…

    $21.95
  18. Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    Freud # 91-108 9-Piece Basic Router Bit Set, 1/2'' Shank

    …edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints…

    $176.47
  19. Freud # 42-110 Bearing Flush Trim Bits, 1/2" Dia. x 1" H x 1/2" Sh.

    Freud # 42-110 Bearing Flush Trim Bits, 1/2" Dia. x 1" H x 1/2" Sh.

    …is a breeze with this flush trim bit from Freud. With 1" of carbide, it's ideal for use with standard 3/4" sheet goods, as well as most 3/4" nominal solid goods. With two flutes to provide fast chip clearance, and razor sharp carbide for smooth, burn-free cuts, these bits will turn out top-quality…

    $18.97
  20. Freud # 42-116 Bearing Flush Trim Bits, 1/2" Dia. x 2" H x 1/2" Sh.

    Freud # 42-116 Bearing Flush Trim Bits, 1/2" Dia. x 2" H x 1/2" Sh.

    …bottom-mounted bearing guide, this bit works great for sink cut-outs and template profiles on laminate substrates and solid wood materials alike. These are the bits to rely on for a smooth, burn-free cut. Two flutes provide fast cutting in thick, demanding materials.* Cuts all composition materials,…

    $29.47
  21. Freud # 42-106 Bearing Flush Trim Bits, 1/2'' Dia. x 1/2'' H x 1/4'' Sh.

    Freud # 42-106 Bearing Flush Trim Bits, 1/2'' Dia. x 1/2'' H x 1/4'' Sh.

    …laminate counter tops and doing pattern work. * These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. * Cuts all composition materials, plywoods, hardwoods,and softwoods. * Use on portable or table-mounted routers.

    $17.47
  22. Freud # 44-100 Bearing Flush Trim Bits, 3/8'' Dia. x 1'' H x 1/4'' Sh.

    Freud # 44-100 Bearing Flush Trim Bits, 3/8'' Dia. x 1'' H x 1/4'' Sh.

    …laminate counter tops and doing pattern work. * These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. * Cuts all composition materials, plywoods, hardwoods,and softwoods. * Use on portable or table-mounted routers.

    $26.47
  23. Freud # 42-104 Bearing Flush Trim Bits, 1/2'' Dia. x 1'' H x 1/4'' Sh.

    Freud # 42-104 Bearing Flush Trim Bits, 1/2'' Dia. x 1'' H x 1/4'' Sh.

    …laminate counter tops and doing pattern work. * These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. * Cuts all composition materials, plywoods, hardwoods,and softwoods. * Use on portable or table-mounted routers.

    $16.97
  24. Freud # 44-102 Bearing Flush Trim Bits, 3/8'' Dia. x 1/2'' H x 1/4'' Sh.

    Freud # 44-102 Bearing Flush Trim Bits, 3/8'' Dia. x 1/2'' H x 1/4'' Sh.

    …laminate counter tops and doing pattern work. * These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. * Cuts all composition materials, plywoods, hardwoods,and softwoods. * Use on portable or table-mounted routers.

    $24.47
  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
Feedback X