Flush Router Bit

  • Items 1 - 24 of 46
  • Page:
    1. 1
    2. 2
  1. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  2. Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    Rockler Pattern Flush Trim Router Bits - 1/2" Shank

    …bearing guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way).…

    1 Review(s)
    From: $27.59
  3. Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/4" Shank

    …on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and precision-ground…

    From: $22.97
  4. Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    Rockler Pattern Router Bit - 1/2" Dia x 1/4" H x 1/4" Shank

    With its 1/4" maximum depth of cut, this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it…

    5 Review(s)
    $18.99
  5. Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    Rockler Piloted Flush Trim Router Bits - 1/4" Shank

    …you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template…

    From: $15.99
  6. Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Top Bearing Flush Trim Router Bits - 1/2" Shank

    …on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and precision-ground…

    From: $31.97
  7. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    …for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held routers, laminate trimmers, and table-mounted portable routers.

    From: $34.47
  8. Rockler Large Trim for 2" Thick Doors Router Bit - 1" Dia x 2" H x 1/2" Shank

    Rockler Large Trim for 2" Thick Doors Router Bit - 1" Dia x 2" H x 1/2" Shank

    …a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be used as a double-bearing flush trim bit, as two bearings are included for that purpose. Capable of trimming stock up to 2" thick.…

    5 Review(s)
    $89.99
  9. Freud® 64-100 Solid Carbide Flush Trim Router Bit - 1/4" Dia x 3/8" H x 1/4" Shank

    Freud® 64-100 Solid Carbide Flush Trim Router Bit - 1/4" Dia x 3/8" H x 1/4" Shank

    …on CNC and other automatic routers as well as hand-held and tablemounted portable routers. * Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD™ Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and…

    $9.47
  10. Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    Rockler Flush Door Trimming Router Bit - 3/4" Dia x 2" H x 1/2" Shank

    …a full 2" of carbide, this bit is ideally suited for trimming thick entry doors, interior doors and countertops. It features a top-mounted guide bearing, which lets you use templates on the top side. This means better visibility when hand-holding the router. The bit is 3/4" in diameter, and features…

    6 Review(s)
    $44.99
  11. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    …you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template…

    From: $17.99
  12. Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Double Bearing Shear Flush Trim Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain,…

    13 Review(s)
    $42.99
  13. Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    …edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints…

    $176.47
  14. Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    Rockler Small Trim for 1" Thick Doors Router Bit - 3/4" Dia x 1" H x 1/2" Shank

    …a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be used as a double-bearing flush trim bit, as two bearings are included for that purpose. Capable of trimming stock up to 1" thick.…

    5 Review(s)
    $49.99
  15. Rockler Shear Flush Trim Bit Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Rockler Shear Flush Trim Bit Router Bit - 3/4" Dia x 1-1/2" H x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, figured…

    13 Review(s)
    $34.99
  16. Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    flush trim bit from Freud. With two flutes to provide fast chip clearance, and razor sharp carbide for smooth, burn-free cuts, these bits will turn out top-quality edges time after time.* Cuts all composition materials, plywoods, hardwoods,and softwoods.* Use on portable or table-mounted routers.

    From: $18.97
  17. Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    These bits are ideal for trimming 3/4" material flush with a substrate—shelf caps with shelves and face frames with cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free,…

    3 Review(s)
    From: $32.97
  18. Freud® Bearing Flush Trim Router Bits - 1/4" Shank

    Freud® Bearing Flush Trim Router Bits - 1/4" Shank

    These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers. Application: Trimming laminate counter tops and doing…

    From: $16.97
  19. Trend T4 Variable Speed Plunge Router w/FREE Flush Trim Router Bit ($20 Value)

    Trend T4 Variable Speed Plunge Router w/FREE Flush Trim Router Bit ($20 Value)

    …perfect take-along router for light duty tasks such as inlaying, sign making, edge molding and more. It's also versatile - it features variable speed, and you can lock out the base for standard routing, or use the motor alone for power carving. The convenient spindle lock makes bit changes fast and…

    2 Review(s)
    $139.99
  20. Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Rockler Pattern Flush Trim Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99
  21. Freud® 50-098 Top Bearing Flush Trim Router Bit - 5/16" Dia x 1" H x 1/4" Shank

    Freud® 50-098 Top Bearing Flush Trim Router Bit - 5/16" Dia x 1" H x 1/4" Shank

    …on CNC and other automatic routers as well as hand-held and table-mounted portable routers. * Features TiCo Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion.* Each bit is computer-balanced and precision-ground…

    $27.97
  22. Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/4" Shank

    Top quality bits that meet the high demands of Rockler Woodworking and Hardware. Bit has two flutes and 5/8" ball bearing guide. Use to trim cabinet face frames flush with cabinet sides - decorative V-groove conceals the seam.

    $21.99
  23. Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank

    Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank

    …better to emphasize a seam than to try to hide it. This bit does just that, applying a neat decorative V-groove along the line of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush trim bit, you also cut down on a lot of sanding. Just a pass or two…

    $22.99
  24. Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    …well-used router bits in the shop, this 5-Piece Introductory Router Bit Set is sure to see plenty of use. The flush-trim bit is indispensable for flushing up face frames and shelf caps with their mating panels. Use the 1/4" straight bit for routing grooves and dadoes. The ogee and round over bits

    $98.97
  • Items 1 - 24 of 46
  • Page:
    1. 1
    2. 2
Feedback X