Flush Trim

  • Items 1 - 24 of 62
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud Downshear Helix Flush Trim Bits

    Freud Downshear Helix Flush Trim Bits

    These bits are ideal for trimming 3/4" material flush with a substrate—shelf caps with shelves and face frames with cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free,…

    3 Review(s)
    From: $32.97
  2. Freud 13 Piece Super Bit Set

    Freud 13 Piece Super Bit Set

    This set is a veritable variety pack of the most-used bits for woodworkers, including three sizes of straight bits, a round-over bit, a chamfer bit, a rabbeting bit, a cove bit and a Roman ogee bit. All bits have sturdy 1/2" shanks for minimal vibration, and the set comes in Freud's unique shadow…

    2 Review(s)
    $220.47
  3. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …repeating a dado for indexed grooves in shelving systems and false panelling.* Use the Edging Trim Kit (45052, sold separately) to effortlessly and accurately trim hardwood and iron-on edging flush with the panel. Features:* One Time Set Up - Set up the CRB7 to fit your favorite router just once…

    6 Review(s)
    $79.99
  4. Pattern Flush Trim Router Bit- 1/2 Inch Shank

    Pattern Flush Trim Router Bit- 1/2 Inch Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  5. Rockler Pattern Flush Trim Bits for Plunge Routers

    Rockler Pattern Flush Trim Bits for Plunge Routers

    The bearing guides on our Pattern Flush Trim Bits are located on the shank side of the blade, and have the same diameter as the blade, making them the perfect choice for template work when the template is fastened on the top side of the material (if using a hand-held router in the conventional way).…

    1 Review(s)
    From: $27.59
  6. 1/2'' Pattern Router Bit

    1/2'' Pattern Router Bit

    …dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it ideal for pattern or template cutting. Carbide-tipped. Shank is 1/4" in diameter, bearing is 1/2" diameter and…

    5 Review(s)
    $18.99
  7. Freud Top Bearing Flush Trim Router Bits

    Freud Top Bearing Flush Trim Router Bits

    The top-mounted guide bearings on these router bits make them ideal for grooving, lettering and dadoes, as well as any other template work where the template is mounted on the top face of the workpiece. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other…

    From: $22.97
  8. 2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    2 Flute Shear Flush Trim Bit, 3/4" Dia. x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the twin shear cutters on this bit slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain, figured…

    13 Review(s)
    $34.99
  9. Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/2" Shank

    Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/2" Shank

    …of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush trim bit, you also cut down on a lot of sanding. Just a pass or two with a palm sander is enough to remove any mill marks. Ideal for trimming cabinet face frames flush with the cabinet sides.

    $22.99
  10. FastCap Flexible Flush Cut Saw

    FastCap Flexible Flush Cut Saw

    Difficult trim cuts are a thing of the past with the Pocket Pull Saw. The super-thin, razor-sharp blade flexes to give you easy access to even the tightest spots. Technical Details:* 18 TPI blade* Only .015" thin* Stays locked when open* Folds for easy storage while protecting the blade and keeping…

    6 Review(s)
    $10.49
  11. Piloted Flush Trim Bits 1/2" Shank

    Piloted Flush Trim Bits 1/2" Shank

    …rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below…

    $27.99 From: $18.99

    SAVE 32%

  12. 2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    2 Flute Double Bearing Shear Flush Trim Bit 3/4" Dia x 1-1/2" Cutter x 1/2" Shank

    Instead of chopping at the wood fibers at a 90° angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain,…

    13 Review(s)
    $42.99
  13. Freud Top and Bottom Bearing Flush Trim Router Bits

    Freud Top and Bottom Bearing Flush Trim Router Bits

    …the opposite direction without repositioning your pattern. Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held…

    From: $34.47
  14. Piloted Flush Trim Bits 1/4" Shank

    Piloted Flush Trim Bits 1/4" Shank

    …rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below…

    From: $15.99
  15. Freud # 64-100 Solid Carbide Flush Trim Bit, 1/4'' Dia. x 3/8''H, 1/4'' Shank

    Freud # 64-100 Solid Carbide Flush Trim Bit, 1/4'' Dia. x 3/8''H, 1/4'' Shank

    …carbide extends the cutting life, while the self-piloting feature eliminates the expense and upkeep of a ball-bearing assembly. Ideal for laminate trimming, where the adhesive can quickly gum up a ball-bearing guide. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and…

    $9.47
  16. Phenolic Table Saw Insert Kit

    Phenolic Table Saw Insert Kit

    …kit includes two phenolic plates for only a little more than the cost of one pre-cut plate! Just rout to the size you need with a Shear Cutting Flush Trim Bit (24740, sold separately). Also works great for band saws, scroll saws, jigs and fences. Phenolic is extremely hard for optimum durability and…

    31 Review(s)
    $31.99
  17. Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)

    Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99 $15.39

    SAVE 30%

  18. Piloted Flush Trim Bit

    Piloted Flush Trim Bit

    Piloted Flush Trim Bit

    $34.99
  19. Rockler Flush Door Trimming Bit

    Rockler Flush Door Trimming Bit

    With a full 2" of carbide, this bit is ideally suited for trimming thick entry doors, interior doors and countertops. It features a top-mounted guide bearing, which lets you use templates on the top side. This means better visibility when hand-holding the router. The bit is 3/4" in diameter, and…

    6 Review(s)
    $44.99
  20. Freud # 42-104 Bearing Flush Trim Bits, 1/2'' Dia. x 1'' H x 1/4'' Sh.

    Freud # 42-104 Bearing Flush Trim Bits, 1/2'' Dia. x 1'' H x 1/4'' Sh.

    Application: Trimming laminate counter tops and doing pattern work. * These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. * Cuts all composition materials, plywoods, hardwoods,and softwoods. * Use on portable or…

    $16.97
  21. Edge Routing Dust Port

    Edge Routing Dust Port

    Eliminates dust while flush trimming and routing small decorative edges - among the most common routing jobs woodworkers encounter! Offers easy tool-free installation onto any router baseplate that accepts a standard Porter Cable template guide bushing. 2-1/2" O.D. dust port.* Installs easily onto…

    18 Review(s)
    $15.99
  22. Double Edge Trimmer

    Double Edge Trimmer

    Simply squeeze to cleanly trim both edges flush with plywood faces. Trimmer houses four blades that cut flush with the edges and four blades that cut at a 45° bevel angle that are held in a spring-loaded mechanism that you simply squeeze until flush with the edges of your material. Full closed…

    31 Review(s)
    $22.99
  23. Dozuki Dovetail Saw

    Dozuki Dovetail Saw

    This Japanese handsaw is used for cutting dovetails for boxes, drawers, or furniture. Features metal backbone to help keep the blade stiff. Blade has 25 TPI, a 9-1/2" cutting edge and is 0.3mm thick.

    9 Review(s)
    $47.99
  24. Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors

    Small Trim Router Bit Kit, 3/4" Dia. x 1" L, for 1" Thick Doors

    …used as a double-bearing flush trim bit, as two bearings are included for that purpose. Capable of trimming stock up to 1" thick. Click the "Videos" tab to see how this kit will save you time! A larger version of the same kit is available separately (26841) for trimming stock up to 2" thick. Small…

    5 Review(s)
    $49.99
  • Items 1 - 24 of 62
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X