Flute And Bead

  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
  1. Freud® Canoe Joint Router Bits - 1/2" Shank

    Freud® Canoe Joint Router Bits - 1/2" Shank

    …91701 and 36992. Application: Producing joints for curved projects such as circular planters and canoes.* Bit 99-017 cuts the flute and 99-018 cuts the mating bead.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as table-mounted…

    From: $49.97
  2. Rockler Matching Flute and Bead Router Bits - 1/2" Shank

    Rockler Matching Flute and Bead Router Bits - 1/2" Shank

    These two bits have corresponding cove and bead profiles, which make them ideal for creating curved forms such as those found in the long, curving hulls of canoes, and in lightweight coopered barrels. You can also use them for the flexible lids on roll-tops desks, provided there is only a convex…

    $29.99
  3. Fluted/Beaded Moldings and Rosettes-Rosettes

    Fluted/Beaded Moldings and Rosettes-Rosettes

    For the finishing touch add fluted or beaded molding and rosettes. Molding is 3" W x 4' L x 3/4" thick. Rosettes are 3" x 3". See our complete selection of Embossed Carvings.

    From: $9.39
  4. Rockler Full Bead Router Bit - 1-1/8" Dia x 5/8" H x 1/4" Shank

    Rockler Full Bead Router Bit - 1-1/8" Dia x 5/8" H x 1/4" Shank

    …and bottom-mounted bearings, this beading bit lets you cut further into the panel, and in a variety of configurations, both freehand and in a table. It also doubles as a 1/4" round over bit - just raise the bit until only the bottom radius is exposed. Two flutes and 5/8" bearings. Top quality bits…

    $49.99
  5. Freud® 84-126 Triple Fluting Router Bit - 7/8" Dia x 1-5/64" H x 1/2" Shank

    Freud® 84-126 Triple Fluting Router Bit - 7/8" Dia x 1-5/64" H x 1/2" Shank

    Great for routing flutes in columns, posts, decorative moldings and countertop edging. Stock can be sized to rout three flutes referenced off one edge and three off the opposite edge for a wider column. The 1/2" shank ensures a steady cut with minimal vibration, while the solid carbide cutting edges…

    $56.97
  6. Rockler Roundover/ Beading Router Bits - 1/4" Shank

    Rockler Roundover/ Beading Router Bits - 1/4" Shank

    …bearing to the beading mode. Shear angle provides the smoothest cut available.* Includes smaller 3/8" bearing and wrench for beading applications at no additional charge.* Items with * in the description are larger bits that should be used in router tables at reduced RPM.* Two flutes.* 1/2" bearing…

    13 Review(s)
    From: $22.99
  7. Rockler Roundover/ Beading Router Bits - 1/2" Shank

    Rockler Roundover/ Beading Router Bits - 1/2" Shank

    …bearing to the beading mode. Shear angle provides the smoothest cut available.* Includes smaller 3/8" bearing and wrench for beading applications at no additional charge.* Items with * in the description are larger bits that should be used in router tables at reduced RPM.* Two flutes.* 1/2" bearing…

    13 Review(s)
    $65.79 From: $24.99

    SAVE 62%

  8. Fluted/Beaded Moldings and Rosettes-Fluted/Beaded Moldings 3" W x 4' L x 3/4" Thick

    Fluted/Beaded Moldings and Rosettes-Fluted/Beaded Moldings 3" W x 4' L x 3/4" Thick

    Unfinished moldings are dual-sided: Fluted on one side and beaded on the other side. For the finishing touch add fluted or beaded molding and rosettes. Molding is 3" W x 4' L x 3/4" thick. Rosettes are 3" x 3". See our complete selection of Embossed Carvings.

    1 Review(s)
    From: $32.49
  9. Rockler V-Groove Router Bit - 3/4" Dia x 5/8" H x 1/2" Shank

    Rockler V-Groove Router Bit - 3/4" Dia x 5/8" H x 1/2" Shank

    …used for sign-making, this 90° V-groove Bit provides excellent shadow and definition for letters and text. It is also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes. 1/2" shank.

    2 Review(s)
    $23.99 $17.99

    SAVE 25%

  10. Rockler V-Groove Router Bits - 1/4" Shank

    Rockler V-Groove Router Bits - 1/4" Shank

    …used for sign-making, as the V-groove provides excellent shadow and definition for letters and text. They are also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes. 1/4" shank.

    2 Review(s)
    From: $19.99
  11. Robert Sorby Parting Tools

    Robert Sorby Parting Tools

    …well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets. Diamond Parting Tool - The special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat…

    From: $54.49
  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
Feedback X