Flute And Bead Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 8 of 8
  • Page:
    1. 1
  1. Freud Canoe Joint Bits

    Freud Canoe Joint Bits

    …versions suitable for stock up to 1/2" thick, see Rockler bits 91701 and 36992. Application: Producing joints for curved projects such as circular planters and canoes.* Bit 99-017 cuts the flute and 99-018 cuts the mating bead.* Cuts all composition materials, plywoods, hardwoods, and softwoods.*…

    From: $49.97
  2. Freud 84-126 Triple Fluting Bit

    Freud 84-126 Triple Fluting Bit

    Great for routing flutes in columns, posts, decorative moldings and countertop edging. Stock can be sized to rout three flutes referenced off one edge and three off the opposite edge for a wider column. The 1/2" shank ensures a steady cut with minimal vibration, while the solid carbide cutting edges…

    $56.97
  3. Matching Flute and Bead Router Bits

    Matching Flute and Bead Router Bits

    These two bits have corresponding cove and bead profiles, which make them ideal for creating curved forms such as those found in the long, curving hulls of canoes, and in lightweight coopered barrels. You can also use them for the flexible lids on roll-tops desks, provided there is only a convex…

    $29.99
  4. Full Bead Router Bit

    Full Bead Router Bit

    …bearings, this beading bit lets you cut further into the panel, and in a variety of configurations, both freehand and in a table. It also doubles as a 1/4" round over bit - just raise the bit until only the bottom radius is exposed. Two flutes and 5/8" bearings. Top quality bits that meet the high…

    $49.99
  5. V-Groove Router Bit

    V-Groove Router Bit

    …used for sign-making, this 90° V-groove Bit provides excellent shadow and definition for letters and text. It is also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes. 1/2" shank.

    2 Review(s)
    $23.99
  6. Roundover/ Beading Router Bits-1/4 Inch Shank

    Roundover/ Beading Router Bits-1/4 Inch Shank

    …bearing to the beading mode. Shear angle provides the smoothest cut available.* Includes smaller 3/8" bearing and wrench for beading applications at no additional charge.* Items with * in the description are larger bits that should be used in router tables at reduced RPM.* Two flutes.* 1/2" bearing…

    13 Review(s)
    From: $22.99
  7. Roundover/ Beading Router Bits-1/2 Inch  Shank

    Roundover/ Beading Router Bits-1/2 Inch Shank

    …bearing to the beading mode. Shear angle provides the smoothest cut available.* Includes smaller 3/8" bearing and wrench for beading applications at no additional charge.* Items with * in the description are larger bits that should be used in router tables at reduced RPM.* Two flutes.* 1/2" bearing…

    13 Review(s)
    From: $22.99
  8. V-Groove Router Bits-1/4 Inch Shank

    V-Groove Router Bits-1/4 Inch Shank

    …V-groove bits are available in several angles to cut grooves of varying depths. They are commonly used for sign-making, as the V-groove provides excellent shadow and definition for letters and text. They are also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits

    2 Review(s)
    From: $19.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 8 of 8
  • Page:
    1. 1
Feedback X