Flute Router Bit

  • Items 1 - 24 of 82
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud Round Nose Bits-Optional Sizes

    Freud Round Nose Bits-Optional Sizes

    Freud's Round Nose Router Bits can be used for fluted millwork, signs and decorative veining, as well as for practical features such as finger pulls and drain rails for cutting boards.* Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden…

    2 Review(s)
    $34.97 From: $24.79

    SAVE 29%

  2. Core Box Router Bits-1/2"  Shank

    Core Box Router Bits-1/2" Shank

    Our Core Box Bits are available in several angles to cut rounded grooves and slots of varying widths that can be both decorative and functional. Sometimes called round nose bits, they are commonly used for sign-making, and are also ideal for fluted columns, finger pulls, drain grooves on cutting…

    5 Review(s)
    From: $23.99
  3. Freud 84-126 Triple Fluting Bit

    Freud 84-126 Triple Fluting Bit

    Great for routing flutes in columns, posts, decorative moldings and countertop edging. Stock can be sized to rout three flutes referenced off one edge and three off the opposite edge for a wider column. The 1/2" shank ensures a steady cut with minimal vibration, while the solid carbide cutting edges…

    $56.97
  4. Router Fluting Jig

    Router Fluting Jig

    …to rout out flute after flute. Scales on the centerpiece and writable/erasable indexing surfaces make setup simple. Additional features:* Pre-drilled to fit most routers on the market* Easy to custom drill for non-standard routers* Zero mark on scales aligns with center of bit* Built with MDF,…

    29 Review(s)
    $69.99
  5. Core Box Router Bits-1/4"  Shank

    Core Box Router Bits-1/4" Shank

    Our Core Box Bits are available in several angles to cut rounded grooves and slots of varying widths that can be both decorative and functional. Sometimes called round nose bits, they are commonly used for sign-making, and are also ideal for fluted columns, finger pulls, drain grooves on cutting…

    5 Review(s)
    From: $17.99
  6. Freud # 18-108 Round Nose Bits, 1/2'' Dia. x 3/8'' H x 1/4'' Sh.

    Freud # 18-108 Round Nose Bits, 1/2'' Dia. x 3/8'' H x 1/4'' Sh.

    Application: Fluted millwork, signs and decorative veining. * Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wood signs. * Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as…

    $25.97
  7. Rockler Straight Router Bits, 2-Flute, 1/2" Shank

    Rockler Straight Router Bits, 2-Flute, 1/2" Shank

    …cuts, Rockler Straight Bits are the perfect candidates for dadoes, grooves and mortises of all sizes. All feature sturdy 1/2" shanks, which reduce vibration and chatter for a smoother cut. This in turn translates to tighter joints and stronger joinery. Two carbide flutes are precision ground to…

    14 Review(s)
    $14.99 From: $9.99

    SAVE 33%

  8. Matching Flute and Bead Router Bits

    Matching Flute and Bead Router Bits

    These two bits have corresponding cove and bead profiles, which make them ideal for creating curved forms such as those found in the long, curving hulls of canoes, and in lightweight coopered barrels. You can also use them for the flexible lids on roll-tops desks, provided there is only a convex…

    $29.99
  9. Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height

    Pattern Flush Trim Router Bit 3/4'' Diameter x 1-1/4'' Height

    …this bit is ideal for pattern or template cutting. Since the bearing is top-mounted, the template is also top-mounted, and you get a clear view of the cut line. Of course, it also doubles as a 3/4" dado bit, and can be used to trim veneers and other laminates flush with the substrate. Two flutes,

    21 Review(s)
    $26.99
  10. Specialty Molding Router Bit for Decorative Edges

    Specialty Molding Router Bit for Decorative Edges

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Recommended for crown molding, window casing/sills, baseboards, picture frames, and chair rails. Features two flutes and ball bearing guides (3/8" guide for 91859, 1/2" guide for 91870).

    1 Review(s)
    From: $37.99
  11. Piloted Flush Trim Bits 1/2" Shank

    Piloted Flush Trim Bits 1/2" Shank

    …used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.* Two and three flute cutters. * 1/2" shanks.

    $27.99 From: $18.99

    SAVE 32%

  12. Rockler 5-Pc. Starter Bit Set

    Rockler 5-Pc. Starter Bit Set

    With two joinery bits for basic dados and rabbets, plus three bearing-guided edge profiling bits, this five-piece router bit set will cover the bases for both solid structure and visual embellishment. All bits have 1/2" shanks to reduce chatter and provide maximum performance. A convenient storage…

    $149.99
  13. DeWalt DWP611PK Compact Router

    DeWalt DWP611PK Compact Router

    …and electronic speed control to maintain speed under load. Intuitive depth adjustment ring, quick-release tabs and adjustable clamp make adjustments a snap. 1/4" collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes.

    3 Review(s)
    $199.00
  14. Undersized Router Bits-1/4 Inch  Shank

    Undersized Router Bits-1/4 Inch Shank

    …used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which requires a flat, finished bottom. The two-flute cutters give a smooth finish with a medium feed rate. Two flutes, 1/4" shank.

    21 Review(s)
    From: $13.99
  15. Onsrud Down-Cut Spiral Bits

    Onsrud Down-Cut Spiral Bits

    Down-spiral cutting action forces the chips down into the groove, eliminating the tendency for wood fibers to chip out the face. Double-flute design with HSS (high speed steel) construction for a smooth finish. * Recommended when chip flow should be directed down for a clean cut on top of the…

    From: $19.39
  16. Freud Double Flute Straight Bits-Optional Sizes

    Freud Double Flute Straight Bits-Optional Sizes

    …straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    4 Review(s)
    From: $17.97
  17. Full Bead Router Bit

    Full Bead Router Bit

    …bearings, this beading bit lets you cut further into the panel, and in a variety of configurations, both freehand and in a table. It also doubles as a 1/4" round over bit - just raise the bit until only the bottom radius is exposed. Two flutes and 5/8" bearings. Top quality bits that meet the high…

    $49.99
  18. Specialty Molding Router Bit 1" Diameter x 1-3/8" High x 1/2" Shank

    Specialty Molding Router Bit 1" Diameter x 1-3/8" High x 1/2" Shank

    …classic, architectural look with this unique molding bit. Perfect for chair rails, door casings, trim, pilasters, window casing/sills, baseboards and picture frames. You can use the full profile, or just a portion of it to achieve the look you want. Features two flutes and a 1/2" ball bearing guide.

    1 Review(s)
    $49.99
  19. Rockler Classical Roman Ogee Plunge Bits

    Rockler Classical Roman Ogee Plunge Bits

    Our Roman Ogee Plunge Bit can be used for any fluting application, and even for routing sign text, but it is perhaps most often used to create a panel door effect for painted MDF and solid wood. Roman Ogee in essence, the profile's radiused bottom gives a positive-negative effect to the cut shape of…

    1 Review(s)
    From: $23.99
  20. Freud Double Compression Spiral Router Bit

    Freud Double Compression Spiral Router Bit

    …of up and down shear flutes eliminate chipping on both sides of double-sided veneers or laminated materials for a fine finish.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    1 Review(s)
    From: $81.97
  21. Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/4" Shank

    Rockler Flush Trim V-Groove Router Bit, 1/2" Diameter x 1" Height - 1/4" Shank

    Top quality bits that meet the high demands of Rockler Woodworking and Hardware. Bit has two flutes and 5/8" ball bearing guide. Use to trim cabinet face frames flush with cabinet sides - decorative V-groove conceals the seam.

    $21.99
  22. Freud Canoe Joint Bits

    Freud Canoe Joint Bits

    …Rockler bits 91701 and 36992. Application: Producing joints for curved projects such as circular planters and canoes.* Bit 99-017 cuts the flute and 99-018 cuts the mating bead.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as…

    From: $49.97
  23. Cove Router Bits-1/2 Inch Shank

    Cove Router Bits-1/2 Inch Shank

    …an elegant edge on drawer fronts, cabinet doors, furniture pieces and molding trim. Features an upward shear angle for more efficient and smoother cutting. Available in a range of radiuses to suit your application. 1/2" shanks provide the smoothest possible finished cut.* Two flutes.* 3/8" bearing.

    2 Review(s)
    From: $25.99
  24. 3/8'' Beadlock® Tenon Bit

    3/8'' Beadlock® Tenon Bit

    Save money by making your own Beadlock® loose tenon stock - just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can…

    1 Review(s)
    $51.99
  • Items 1 - 24 of 82
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X