Freud 12

  • Items 1 - 24 of 131
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …eliminating the tendency for wood fibers to chip out the face. Also works great for cutouts and edgework. 1/2" shank. Application: Grooves and dadoes in single-sided veneers and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a…

    3 Review(s)
    From: $50.97
  2. Freud® Mortising Router Bits - 1/2" Shank

    Freud® Mortising Router Bits - 1/2" Shank

    The down shear angle of the cutters on these Freud Mortising Bits works to eliminate splintering, making them particularly well suited for cutting hinge mortises, where a crisp outline is critical. They can also be used ideal for joinery applications like mortises, and dadoes.* Designed with deep…

    2 Review(s)
    From: $18.47
  3. Freud® Chamfer Router Bits - 1/2" Shank

    Freud® Chamfer Router Bits - 1/2" Shank

    Creates a uniform chamfer on the edge of any work piece to add character, while retaining crisp geometric lines. The width of the chamfered edge is easily adjusted by changing the height of the bit.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and…

    From: $35.47
  4. Freud® Cove Router Bits - 1/2" Shank

    Freud® Cove Router Bits - 1/2" Shank

    …signs, and to embellish other profiles and moldings. The shear angle slices through wood similar to the way a finely honed hand plane would. Rugged 1/2" shank deadens vibration, while the finely sharpened carbide ensures a long useful life.* Cuts all composition materials, plywoods, hardwoods, and…

    From: $34.97
  5. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    Use them for joinery applications, such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the rabbet.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on hand-held and…

    From: $31.97
  6. Freud® Lock Miter Bits - 1/2'' Shank

    Freud® Lock Miter Bits - 1/2'' Shank

    Run one board vertically and the piece to be joined horizontally. the Lock Miter Bit cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable…

    From: $95.97
  7. Freud® Rabbeting Router Bits - 1/2" Shank

    Freud® Rabbeting Router Bits - 1/2" Shank

    These bits include a set of bearings, which are installed to achieve a range of rabbet depths. Use them for joinery applications, such as for letting in back panels and the tops and bottoms of cabinets. The bits feature high-grade carbide, which produces super smooth cuts on both surfaces of the…

    2 Review(s)
    From: $42.47
  8. Freud® Rounding Over Router Bits - 1/2" Shank

    Freud® Rounding Over Router Bits - 1/2" Shank

    Freud's Rounding Over Router Bits are ideal for softening furniture edges and creating decorative rounded edges. The bit can set to cut a simple radius, or lowered to cut a beaded edge. Freud round over bits cut through all composition materials, plywoods, hardwoods, and softwoods. They feature…

    From: $32.47
  9. Freud® Round Nose Router Bits - 1/2" Shank

    Freud® Round Nose Router Bits - 1/2" Shank

    Freud's Round Nose Router Bits can be used for fluted millwork, signs and decorative veining, as well as for practical features such as finger pulls and drain rails for cutting boards.* Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden…

    2 Review(s)
    $34.97 From: $24.79

    SAVE 29%

  10. Freud® Quadra-Cut™ Beading Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Beading Router Bits - 1/2" Shank

    Freud's exclusive Quadra-Cut™ Beading Bits cut a precise radius with a step on either side, the perfect combination of tactile softness and visual definition. The 4 cutter Quadra-Cut design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain…

    3 Review(s)
    From: $38.97
  11. Freud® Traditional Beading Router Bits - 1/2" Shank

    Freud® Traditional Beading Router Bits - 1/2" Shank

    This Freud beading bit makes quick work of routing both beaded moldings and beaded edges for larger cabinetry elements. With its integral guide bearing, there is no need to set the depth of cut with a fence. You can even use the bit without a router table at all. The taller section at the top of the…

    3 Review(s)
    From: $35.97
  12. Freud® Canoe Joint Router Bits - 1/2" Shank

    Freud® Canoe Joint Router Bits - 1/2" Shank

    …you can use them for small coopered barrels and planters—you'll be pleased with the results. For larger versions suitable for stock up to 1/2" thick, see Rockler bits 91701 and 36992. Application: Producing joints for curved projects such as circular planters and canoes.* Bit 99-017 cuts…

    From: $49.97
  13. Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    Freud® Carbide Up-Spiral Router Bits - 1/2" Shank

    …routing because when using a guide bushing the best face goes down and templates are attached to the top side. 1/2" shank. Application: Cutting mortises and routing deep blind holes * Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard…

    1 Review(s)
    From: $51.47
  14. Freud® Half Round Router Bits - 1/2" Shank

    Freud® Half Round Router Bits - 1/2" Shank

    Produce a fully rounded edge on dimensional lumber or create an attractive half-round profile on furniture and moldings with this bit. Guiding device must be used. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and…

    From: $46.47
  15. Freud® 90° V Grooving Router Bits - 1/2'' Shank

    Freud® 90° V Grooving Router Bits - 1/2'' Shank

    Freud's "V" grooving bits are designed to cut deep or shallow 90 degree "V" grooves. Ideal for making signs and adding decorative accents to furniture and plaques. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and…

    From: $31.97
  16. Freud® Quadra-Cut™ Rounding Over Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Rounding Over Router Bits - 1/2" Shank

    Freud's Quadra-Cut™ round over bits add softness to cabinetry edges and table tops. Their exclusive 4-cutter Quadra-Cut design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Rounding over bit applications:…

    11 Review(s)
    From: $35.97
  17. Freud® Double Compression Spiral Router Bits - 1/2" Shank

    Freud® Double Compression Spiral Router Bits - 1/2" Shank

    The Freud Double Compression Spiral Bit is the ultimate high-performance straight bit, specially designed to eliminate chipping on both sides of the workpiece. This makes it ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid carbide. 1/2" shank. Application: Fine…

    1 Review(s)
    From: $81.97
  18. Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Freud® Bearing Flush Trim Router Bits - 1/2" Shank

    Trimming laminate counter tops and doing intricate pattern work with templates is a breeze with this flush trim bit from Freud. With two flutes to provide fast chip clearance, and razor sharp carbide for smooth, burn-free cuts, these bits will turn out top-quality edges time after time.* Cuts all…

    From: $18.97
  19. Freud® Double Flute Straight Router Bits - 1/2" Shank

    Freud® Double Flute Straight Router Bits - 1/2" Shank

    Application: General stock removal with a smooth finish.* Freud straight bits cut smoother than other bits because of the precise shear and hook angles.* End of bit relief allows for fast plunging.* Cuts all composite materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic…

    4 Review(s)
    From: $17.97
  20. Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    Freud® 91-108 9-Pc. Basic Router Bit Set - 1/2" Shank

    …1"* Shank (C): 1/2"* Overall Height: 2-5/8" 1/2" Mortising Bit:* Freud #: 16-110* Overall Diameter (A): 1/2"* Carbide Height (B): 1/2"* Shank (C): 1/2"* Overall Height: 2-3/8" 1/2" Dovetail Bit:* Freud #: 22-112* Overall Diameter (A): 1/2"* Carbide Height (B): 1/2"* Shank (C): 1/2"* Overall Height:…

    $176.47
  21. Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    Freud® 91-103 5-Pc. Introductory Router Bit Set H 1/2" Shank

    …possible cuts. 1/2" Flush Trim Router Bit:* Freud #: 42-110* Overall Diameter (A): 1/2"* Bearing Diameter: 1/2"* Carbide Height (B): 1"* Shank (C): 1/2"* Overall Height: 3-1/4" 1/4" Straight Router Bit:* Freud #: 12-100* Overall Diameter (A): 1/4"* Carbide Height (B): 3/4"* Shank (C): 1/2"* Overall…

    $98.97
  22. Freud® 94-150 Door System Router Bit Set - 1/2" Shank

    Freud® 94-150 Door System Router Bit Set - 1/2" Shank

    …a tight fit when using plywood and also allow use with panels as thin as 7/32". High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch buildup. 1/2" shanks. Also includes Freud's Door Lip Bit, Reversible Glue Joint and Ogee Panel Bit.

    $269.47
  23. Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove Raised Panel Router Bits - 1/2" Shank

    Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding*…

    2 Review(s)
    From: $104.47
  24. Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    Freud® Quadra-Cut™ Cove and Bead Router Bits - 1/2" Shank

    …with an upper bead combine to give you a classic design that's perfect for decorative edging on cabinets, molding and furniture. In addition, Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain…

    13 Review(s)
    From: $40.47
  • Items 1 - 24 of 131
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X