Freud Saw

  • Items 1 - 24 of 46
  • Page:
    1. 1
    2. 2
  1. Freud® LU84R Industrial Combination Saw Blades

    Freud® LU84R Industrial Combination Saw Blades

    In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective…

    5 Review(s)
    From: $71.47
  2. SD506 Freud Dado Set

    SD506 Freud Dado Set

    …fine adjustments* Cuts plywood & laminate to solid hard and soft woods* 3/32" chipper allows cut width to be adjusted in 1/32" increments.* Carbide tipped* Use on table saws & radial arm saws* 5/8" arbor* SD506 Freud Dado Set (21697) is 6" in diameter* SD508 Freud Dado Set (21697) is 8" in diameter

    5 Review(s)
    $183.47
  3. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine,…

    5 Review(s)
    From: $52.47
  4. Freud® LM72R Industrial Heavy Duty Rip Saw Blades

    Freud® LM72R Industrial Heavy Duty Rip Saw Blades

    This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to…

    7 Review(s)
    From: $57.47
  5. Freud® LM72M Industrial Heavy Duty Rip Saw Blades

    Freud® LM72M Industrial Heavy Duty Rip Saw Blades

    …Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor. Also available with the premium Perma-SHIELD® coating.

    From: $51.47
  6. Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    Freud® 10" x 40T Premier Fusion General Purpose Saw Blade - P410

    …the toughest woodworking applications. Like Silver I.C.E.™, Perma-SHIELD® eliminates pitch and debris build-up reducing down time for cleaning* Features Ti-Co™ Hi-Density Carbide General Purpose Blend for maximum performance* Anti-vibration design One Freud Premier Fusion Saw Blade

    8 Review(s)
    $99.97
  7. Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

    …eliminates pitch and debris build-up reducing down time for cleaning* Features Ti-Co™ Hi-Density Carbide General Purpose Blend for maximum performance* Thin kerf allows for easier feeding and reduced waste One Freud Premier Fusion Thin Kerf Saw Blade Specifications* 10" by 40 teeth* 5/8" arbor

    8 Review(s)
    $79.97
  8. Freud® 10'' x 60T Precision Crosscut Saw Blade - 49508

    Freud® 10'' x 60T Precision Crosscut Saw Blade - 49508

    …precise, easy crosscuts in solid woods and plywood. The Silver I.C.E. coating helps resist heat and pitch build-up two times longer than standard polished steel blades. This extra protection helps reduce drag, extending the life of your blade and your saw motor. Available exclusively at Rockler.

    $79.99
  9. Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…

    3 Review(s)
    From: $57.47
  10. Freud® LU80R Ultimate Plywood and Melamine Blades

    Freud® LU80R Ultimate Plywood and Melamine Blades

    Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine. Technical Details:* Designed to produce the cleanest cuts possible in plywood and melamine with no bottom splinter.* Application-specific super micrograin carbide teeth are 50-60%…

    5 Review(s)
    From: $94.47
  11. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    …to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece Straight Bit Set (sold separately,…

    16 Review(s)
    $119.99
  12. Freud® LU84M Industrial Combination Saw Blades

    Freud® LU84M Industrial Combination Saw Blades

    In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective…

    From: $61.97
  13. Freud® LU94M Industrial Plastic Saw Blades

    Freud® LU94M Industrial Plastic Saw Blades

    …the cut edge crisp. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $61.47
  14. Freud® LU73M Industrial Cabinetmaker's Crosscut Saw Blades

    Freud® LU73M Industrial Cabinetmaker's Crosscut Saw Blades

    …from 1/2" to 2-3/4" thick. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $62.97
  15. Freud® LU72M Industrial General Purpose Saw Blades

    Freud® LU72M Industrial General Purpose Saw Blades

    …surface finish may occur. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $54.97
  16. Freud® LU95R Industrial Solid Surface Saw Blades

    Freud® LU95R Industrial Solid Surface Saw Blades

    This blade features teeth with a specially designed triple chip grind for leaving swirl-free cuts in solid surface materials such as Dupont® Corian®, Wilsonart Gibralter® and SSV Fountainhead®. The laser-cut anti-vibration slots reduce the sideways movement of the cutting edge…

    1 Review(s)
    From: $126.47
  17. Freud® LU85R Industrial Ultimate Cut-Off Saw Blades

    Freud® LU85R Industrial Ultimate Cut-Off Saw Blades

    This superior blade gives glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. What makes this blade so special is the unique side grinding of each tooth. The teeth actually polish the material as it cuts. New laser-cut anti-vibration that resonates in standard…

    1 Review(s)
    From: $71.47
  18. Freud LU91R Thin Kerf Sliding Compound Miter Saw Blades

    Freud LU91R Thin Kerf Sliding Compound Miter Saw Blades

    This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades,…

    6 Review(s)
    From: $63.97
  19. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  20. Freud® LU89M Industrial Thick Non-Ferrous Metal Saw Blades

    Freud® LU89M Industrial Thick Non-Ferrous Metal Saw Blades

    …produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks…

    1 Review(s)
    From: $74.97
  21. Freud® LU82M Industrial Heavy Duty Multi-Purpose Saw Blades

    Freud® LU82M Industrial Heavy Duty Multi-Purpose Saw Blades

    …loss of surface finish. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $68.47
  22. Freud® LM71M Industrial Thick Stock Rip Saw Blades

    Freud® LM71M Industrial Thick Stock Rip Saw Blades

    …surface finish may occur. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $64.97
  23. Freud® LU71M Industrial High-Production General Purpose Saw Blades

    Freud® LU71M Industrial High-Production General Purpose Saw Blades

    …surface finish may occur. The Silver I.C.E.™ (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

    From: $96.47
  24. Freud® LM74R Industrial Glue Line Rip Saw Blades

    Freud® LM74R Industrial Glue Line Rip Saw Blades

    This blade's specially designed triple chip tooth design produces extremely smooth, true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser cut anti-vibration slots, practically…

    9 Review(s)
    From: $69.97
  • Items 1 - 24 of 46
  • Page:
    1. 1
    2. 2
Feedback X