Groz

  • Grid List
  • Page:
    1. 1
  • Items 1 - 10 of 10
  • Page:
    1. 1
  1. 7'' Woodworker's Bench Vise

    7'' Woodworker's Bench Vise

    Heavy-duty workshop vise has large 7" jaw width and 8" jaw opening.* Solid steel guide rods reduce wear and tear, and give vises a smooth and true parallel action.* Square body seating provides easy fit under benchtop so jaws are flush with bench.* With 1/2" diameter handle.* Toe-in feature provides…

    9 Review(s)
    $89.99
  2. 3-Piece Engineer Square Set

    3-Piece Engineer Square Set

    This handy set is great for setting up and checking machines and projects for extreme accuracy to 0.00063".* Includes 2", 4" and 6" precision steel squares.* Hardened spring steel blades are permanently fixed to the stock with tapered self-locking rivets for complete rigidity.* Working edges of the…

    21 Review(s)
    $49.99
  3. 3' Steel Center Square

    3' Steel Center Square

    Quickly and easily locate the center of round and square stock up to 6" in diameter.* The 3mm thick beveled blade is made from spring steel and is hardened and ground for extended life.* Solid steel right angle stock is 3/8" thick.* Comes in a convenient snap-close vinyl storage case.

    8 Review(s)
    $24.99
  4. Groz Hand Planes-Low Angle Block Plane

    Groz Hand Planes-Low Angle Block Plane

    High-quality carbon steel blades hold an edge longer than standard plane blades! Planes are engineered to exact tolerances while maintaining traditional standards of workmanship, design and performance. Choose from the Low Angle Block Plane and #4 Smoothing plane. Honing recommended before use.*…

    19 Review(s)
    $36.99
  5. Woodturner's Caliper Set

    Woodturner's Caliper Set

    Three-piece set is designed for reliable, accurate layout and measuring. Technical Details:* Contains inside caliper, outside caliper and divider, all in convenient 8" size.* Finely machined nuts run cleanly and quickly to secure legs exactly to dimension.* Divider legs are precision ground to fine,…

    1 Review(s)
    $54.99
  6. 8'' Wing Compass

    8'' Wing Compass

    This industrial-grade tool is essential for laying out circles, curves and for scribing cabinets to an irregular wall surface. Two huge wings spread out up to 10-1/2" for a maximum circle diameter of 21", and close down completely to scribe even the smallest sliver for cabinetry installation. Solid…

    5 Review(s)
    $28.99
  7. 6" Engineer Square

    6" Engineer Square

    Our engineer squares with stainless steel rules, are the ideal choice for setting up machinery like table saw blades, jointer knives and fences. Accurate to .002". Great for marking stock for joints or checking stock for squareness. Both squares are notched where the beam and rule meet for drawing…

    5 Review(s)
    $22.99
  8. 6'' Clamp-On Bench Vise

    6'' Clamp-On Bench Vise

    Portable woodworking vise can be clamped or screwed onto a bench or other work surface. With 6" wide jaw and 4-1/2"jaw opening. Technical Details:* Main screw, guide rods and handle are chrome-plated for corrosion resistance.* Lightweight cast-iron body.* Toe-in feature provides even clamping…

    8 Review(s)
    $39.99
  9. 10'' Sliding T-Bevel Square

    10'' Sliding T-Bevel Square

    Metal blade pivots and can be locked at any angle.

    $20.99
  10. 4" Engineer Square

    4" Engineer Square

    Our engineer squares with stainless steel rules, are the ideal choice for setting up machinery like table saw blades, jointer knives and fences. Accurate to .002". Great for marking stock for joints or checking stock for squareness. Both squares are notched where the beam and rule meet for drawing…

    5 Review(s)
    $12.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 10 of 10
  • Page:
    1. 1
Feedback X