Guide Blocks

  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
  1. Olson® Cool Blocks® for Band Saw

    Olson® Cool Blocks® for Band Saw

    Improve your band saw performance with the blade guide blocks recommended by professionals! Cool Blocks replace your standard upper and lower side blade guides, allowing blades to run cooler, quieter and last longer.* Four guide blocks per set.* Made from non-metallic composite material. * Made in…

    4 Review(s)
    From: $16.79
  2. Kreg Drill Guide Spacer Block

    Kreg Drill Guide Spacer Block

    …and K3* Jig, these blocks are great for quick and easy repair work. Each spacer compensates for 1/4" in material thickness. Simply add the blocks to the bottom of the Jig's Drill Guide. Use one block for 3/4" material, 2 for 1" material and 3 for 1-1/4" material. Includes 3 blocks. *Please note: For…

    $9.99
  3. Kreg Jig® K5 Pocket Hole System

    Kreg Jig® K5 Pocket Hole System

    …in a batch of other great features like a standard swiveling dust-collection port, spring-loaded stop for the Drill Guide Block, and, of course, the ability to remove the Guide Block for portable use, and you have, quite simply, the most advanced Kreg Jig® yet * Front-mounted clamp handle makes…

    $139.00
  4. Ceramic Guide Blocks for Bandsaws, 4-Pack

    Ceramic Guide Blocks for Bandsaws, 4-Pack

    …These blocks will only fit 14" Delta or Jet Band-Saws.* #26687 - Guide Blocks for 14" Delta Band Saws: Includes three blocks that are 1/2" x 1/2" x 7/8" and one angled block that is 1/2" x 1/2" x 1-3/8"* #26696 - Guide Blocks for 14" Jet Band Saws: Includes four blocks

    1 Review(s)
    $24.69
  5. Magswitch T-Handle Magnetic Workholding Square

    Magswitch T-Handle Magnetic Workholding Square

    …reinforcing a fence anywhere on a steel table!* 90° corners for squaring.* Switches in and out of fixtures with ease.* Does not included Resaw Guide shown Magsquares allow for the attachment of all types of fixtures, or shop made jigs for quick connect/disconnect on bandsaws, tablesaws, drill…

    2 Review(s)
    $62.99
  6. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …no additional hardware required.* With purchase of the 2" Lift Blocks (49120, sold separately below), the Multi-Rest can be used on even larger lathes.* The base of the MultiRest has independently adjustable spacer blocks that provide a secure fit on lathe beds with way sizes from 1" to…

    $359.95
  7. Jet® 10'' Bench Top Bandsaw w/Open Stand

    Jet® 10'' Bench Top Bandsaw w/Open Stand

    …without blocking line of sight * Aluminum extruded fence ensures smooth sliding action and straight, precise cuts * Table tilting trunnion allows working angles from 0° to 45° * Magnifying cursor enlarges measurement scale for precise fence location * Rack and pinion blade guide adjustment…

    4 Review(s)
    $374.99
  8. FastCap Miller FastBlock, 2-Pack

    FastCap Miller FastBlock, 2-Pack

    …adjustable drawer guide mounting system. Simply hold the Miller FastBlock on the back side of the face frame, adjust the block flush with the edge of the face frame and mount to the back of the drawer guide. You can also use two Miller FastBlocks per side to block out drawer guides for pull-out…

    1 Review(s)
    $1.99
  9. Bandsaw Duplicating Pin

    Bandsaw Duplicating Pin

    …use the Carter bearing systems.* Includes the necessary hardware for installation. On some saws you can use existing hardware that hold in the guide blocks.* Slots allow placement to the left or right of the blade as required.* Aluminum body measures 1-29/32"W x 23/32"H x 5/32" thick.* Pin length…

    8 Review(s)
    $8.99
  10. All In One Contractor Stop Block

    All In One Contractor Stop Block

    Works with Contractor Clamps (sold separately) to provide a stop for your circularsaw or router when using the clamp as a guide. Plastic housing fits the T-Tracks of theContractor Clamps and a wing nut tightens to secure the block in place at the desiredposition along the clamp.

    $22.59
  11. 1/4" Accessory Kit (Guide Block, Drill Bit and Shim Set)

    1/4" Accessory Kit (Guide Block, Drill Bit and Shim Set)

    1/4" Accessory Kit to the 3/8" Beadlock® Basic Starter Kit includes corresponding guide block, HSS drill bit and shim set.

    $17.99
  12. 1/2" Accessory Kit (Guide Block, Drill Bit and Shim Set)

    1/2" Accessory Kit (Guide Block, Drill Bit and Shim Set)

    1/2" Accessory Kit for the Beadlock® Kit (34802) include corresponding guide block, HSS drill bit and shim set.

    $26.99
  13. Jet Band Saw Riser Blocks

    Jet Band Saw Riser Blocks

    …to convert your saw quickly and easily. Kit includes: Riser block, blade guard assembly, guide post, mounting hardware and instructions. Must be used with 105" band saw blade. Technical Details:* Fits Jet 14" bandsaw with 7/8" dia. guide post* Increases depth of cut from 6" maximum to 12" maximum

    4 Review(s)
    $134.99
  14. Woodworker's Guide to Handplanes

    Woodworker's Guide to Handplanes

    Your guide to selecting, using and maintaining a huge variety of handplanes plus plans for making a handful of your very own! The author breaks every plane down into six basic elements that are common to every plane, and demonstrates how they work. You'll also learn about planes from countries…

    $35.00
  15. Grr-Rip Block™ Smart Hook Push Block

    Grr-Rip Block™ Smart Hook Push Block

    …up-position when not needed.* Use the 90° flip guide for veneers or resawing on band saws.* 90° flip guide also functions as a guard to protect your fingers from bits and blades.* Gravity Heels still engage while the GRR-RIP BLOCK is in vertical position for superior control.* Comfortable…

    2 Review(s)
    $29.95
  16. Bench Dog® Panel-Loc™ Panel Cutting Guide

    Bench Dog® Panel-Loc™ Panel Cutting Guide

    …Lonnie Bird, Panel-Loc is a combination hand guard and panel hold-down that provides safer and better cuts when routing raised panels. Orange push blocks not included. Firmly holds panel down and eliminates unwanted lifting; it places downward pressure on workpiece 2" away from the fence to prevent…

    $52.99
  17. Push Block with Angled Handle

    Push Block with Angled Handle

    A more comfortable way to guide stock through your saw! The ergonomic handle is pitched at just the right angle for a safe, natural grip throughout the cut. And with the rubber friction pad maintaining a firm hold, you won't have to worry about kickback or slip-ups. Made from durable, high impact…

    4 Review(s)
    $7.59
  18. The Hand Guard™ Push Block

    The Hand Guard™ Push Block

    …Unlike wood push sticks, this unique safety tool has self-lubricating properties to reduce kickback from blade contact! Technical Details:* Parallel guide rails on unit's underside and twin legs of heel allow Hand Guard to straddle the blade and keep fingers out of harm's way.* Heel adjusts for wood…

    9 Review(s)
    $17.99
  19. 1/4" Beadlock® Pro Accessory Kit

    1/4" Beadlock® Pro Accessory Kit

    The Beadlock® Pro Accessory Kit include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For use with the Beadlock® Pro Joinery Kit.

    $59.99
  20. 1/2" Beadlock® Pro Accessory Kit

    1/2" Beadlock® Pro Accessory Kit

    The Beadlock® Pro Accessory Kit include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For use with the Beadlock® Pro Joinery Kit.

    $47.99
  21. Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

    Enjoy the ultimate workshop companion. This advanced model of the GRR-Ripper utilizes all the same innovative features of the GR-100 but comes with two additional accessories that improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200)…

    7 Review(s)
    $79.99
  22. Heel Replacements for The Hand Guard Push Block

    Heel Replacements for The Hand Guard Push Block

    Set of six replacement heels for the Hand Guard™ Push Block. Adjustable replacement feet let you safely push different wood thicknesses on your table saw! Feet also rotate into closed position for shaping operations. Made of durable plastic.

    1 Review(s)
    $12.99
  23. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    …bit, 3/8" stop collar, 3/8" Beadlock® guide block, 3/8" mortise paring guide block and a molded plastic case with added space for the optional accessory kits. All Accessory Kits include corresponding guide block, mortise paring guide block, HSS drill bit and stop collar. For more information…

    32 Review(s)
    $137.99
  24. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …the outside edge of the guide block and lock into place with the post handle hold-down clamp and positionable locking knob. Abrasive strip locks the workpiece in place to avoid shimmy or movement. Run the jig along the fence until you cut into the 1" hardwood guide block, which eliminates tear-out.…

    116 Review(s)
    $59.99 $49.99

    SAVE 17%

  • Items 1 - 24 of 43
  • Page:
    1. 1
    2. 2
Feedback X