Guide Rail

  • Items 1 - 24 of 73
  • Page:
    1. 1
    2. 2
    3. 3
  1. White Plastic Guide Rails for 17mm 21/32'' Grooved Drawers

    White Plastic Guide Rails for 17mm 21/32'' Grooved Drawers

    Add stability to your drawer with easy-to-install, screw-on side-mount plastic rails.* Product Dimensions: 285mm (11.22") long x 8mm (.32") thick x 16 mm (.63") high* The groove in the drawer needs to be 17mm (.67") high* Includes screws* White

    $3.29
  2. Festool Guide Rails

    Festool Guide Rails

    …cuts! With the correct Festool Guide Stop, they can work with Festool routers, plunge cut saws, jig saws and more. Technical Details:* Hard-anodized surface* Soft, non-slip coating* Hard rubber splinter guard* Mounting slot for: FSW angle unit, Connector for Guide Rails (482107), FSZ clamps, FS-AW…

    From: $95.00
  3. The Hand Guard™ Push Block

    The Hand Guard™ Push Block

    …wood push sticks, this unique safety tool has self-lubricating properties to reduce kickback from blade contact! Technical Details:* Parallel guide rails on unit's underside and twin legs of heel allow Hand Guard to straddle the blade and keep fingers out of harm's way.* Heel adjusts for wood…

    9 Review(s)
    $17.99
  4. Arch Door Templates

    Arch Door Templates

    Arch Door Templates Template set includes 10 rail templates and 10 corresponding templates for matching center panel. Includes instructional DVD on how to make single panel rail and stile doors. See Also Cathedral Door Templates

    $59.99
  5. Kreg® Rip-Cut Circular Saw Guide

    Kreg® Rip-Cut Circular Saw Guide

    There's no need to juggle guide rails, a pencil or tape measure. In fact, there's no measuring or marking required - just slide the fence on the Rip-Cut to any setting from 1/8" to 24" and rip a clean, straight line right down the length of the sheet. The Rip-Cut attaches easily to virtually any…

    16 Review(s)
    $34.99
  6. Rockler French Traditional Router Bit - 1-1/2" Dia x 1-11/16" H x 1/2" Shank

    Rockler French Traditional Router Bit - 1-1/2" Dia x 1-11/16" H x 1/2" Shank

    With 1-11/16" of carbide height, this bit turns out attractive small- to medium-sized crown moldings, window and door casings, picture frames, and chair rails. The bit features two flutes and a 1/2" ball bearing guide.

    $49.99
  7. Center Track and Slide Glides

    Center Track and Slide Glides

    …side saddles.* Use with 29892 center track.* Center tracks fit the slide guides.* Deluxe hardwood tracks fit the slide guides.* Made to fit base cabinets up to 24" deep.* Requires attachment to face frame/drawer and to cross rail at back.* Measures 1- 1/8" W x 3/4" H x 23- 1/4" long and may be cut…

    19 Review(s)
    From: $4.99
  8. Rockler Classic/Vintage Rolling Library Ladder - Track Hardware, Satin Black

    Rockler Classic/Vintage Rolling Library Ladder - Track Hardware, Satin Black

    …own ladder system to your application and preference. After selecting your options and features, you will obtain a Bill of Materials that is your guide for ordering. Ladder Hardware Track 6' (42118): * Durable 6' cut-to-fit Ladder Track provides a sturdy connection for your library ladder to your…

    From: $8.00
  9. Powermatic SLR12 Straight Line Rip Saw

    Powermatic SLR12 Straight Line Rip Saw

    …the cutting cycle. Dual anti-kickback devices help prevent discharge of work pieces. The heavy-duty precision rip fence travels on a solid steel guide rail and is micro-adjustable for fast, accurate set up. Controls for rip width, cutting depth, main and feed motors are all mounted up front for fast…

    $16,599.99
  10. Festool Hole Drill Set with T-Loc Systainer

    Festool Hole Drill Set with T-Loc Systainer

    …with large stationary equipment. For use with the Festool OF 1010 router and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately), to cover any size job. Set Includes:* Guide plate * Centering mandrel* 2 edge stops* 2 linear stops* 2 clamps* Operating…

    $495.00
  11. Festool MFT/3 Multifunction Table - Basic

    Festool MFT/3 Multifunction Table - Basic

    …at Rockler Retail stores or Independent Partner Resellers. Due to customer demand, the MFT/3 is now being offered as a basic unit without the guide rail system. The 35-1/2" tall MFT/3 - Basic is the perfect complement to any shop or worksite. Use the MFT/3 - Basic as an out-feed table or as a work…

    $545.00
  12. Connector for Festool Guide Rails

    Connector for Festool Guide Rails

    Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connectors. Connectors fit in integrated guide rail T-slots for secure cutting. Includes 1 connector (2 are needed). Can also be used to connect the Festool MFS templates.

    2 Review(s)
    $17.00
  13. Festool Parallel Guides 495717 for Guide Rail System

    Festool Parallel Guides 495717 for Guide Rail System

    …the guide rail for each cut. Festool Parallel Guides can be used with any Festool FS/2 Guide Rail (sold separately). Festool Parallel Guide Extensions (sold separately, 46708) for cuts less than 7-11/16". Technical Details:* The Festool Parallel Guide System greatly enhances the standard Guide Rail

    $270.00
  14. Waste Side Splinterguard for Festool TS 55 REQ, 5-Pack

    Waste Side Splinterguard for Festool TS 55 REQ, 5-Pack

    …be removed when making bevel cuts. Sold in packs of five. * Use with the Festool TS 55 REQ (45959, sold separately).* When used with a Festool Guide Rail, the guard allows you to achieve splinter-free cuts on both sides of the blade.* For best results, replace splinterguard when changing blade kerf…

    $20.00
  15. Festool Guide Rail Accessory Kit with New T-Loc Systainer

    Festool Guide Rail Accessory Kit with New T-Loc Systainer

    …value of your FS guide rails when used with your Festool plunge saw or router. Quickly set angles for both mitered and compound cuts using the Angle Unit. Make accurate repeat cuts using the Limit Stop. Work more efficiently by attaching the included Deflector to the end of your rail to prevent your…

    1 Review(s)
    $210.00
  16. Rockler Beadlock® Pro Joinery Kit

    Rockler Beadlock® Pro Joinery Kit

    …in tables, chairs and big casework. Slide the guide block along the rails to place your mortise precisely where you want it. Includes Beadlock® Pro Jig, 3/8" drill bit, 3/8" stop collar, 3/8" Beadlock® guide block, 3/8" mortise paring guide block and a molded plastic case with added space…

    32 Review(s)
    $137.99
  17. Euro Sliding Wood Door System

    Euro Sliding Wood Door System

    No guide rail in the cabinet bottom panel makes it quick and easy to mount cabinet doors!* These sliding door hardware fittings give sliding doors silent operation and concealed appearance.* Running gear clips directly into 35mm drill hole for quick and easy installation.* Recommended for use with…

    2 Review(s)
    From: $24.99
  18. Festool Parallel Guide Extension Set

    Festool Parallel Guide Extension Set

    …the guide rail system by providing a faster, easier, smarter way to create consistent rip cuts. The Parallel Guide Set is comprised of the Parallel Guides (495717) and Parallel Guide Extensions (495718) and offers savings versus purchasing these two products separately. The Parallel Guides are the…

    $325.00
  19. Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …from assembling plywood cabinets to face frames and drawers. * Clamp-It® is also perfect for framing decks, drawer assembly, and installing rails and balusters.* Fence Clamps may also be used to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp…

    14 Review(s)
    $29.99
  20. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …the Rockler Rail Coping Jig for rail and stile doors of cabinets, windows and more to make clean cope cuts without blowouts - perfect for narrow cross-grain rail cuts. If you're after a cabinet door jig, look no further! Simply align material flush with the outside edge of the guide block and lock…

    117 Review(s)
    $44.99
  21. Rockler Rolling Utility Ladder - Track Hardware, Zinc

    Rockler Rolling Utility Ladder - Track Hardware, Zinc

    …grip the floor for stability. To move the ladder, you simply lift it slightly and roll it along the rail to the location you want. The locking wheel assembly rides along the top rail, guiding the ladder as it's repositioned. Once you've retrieved what you need, you can push the ladder up against…

    From: $7.99
  22. Festool OF 1010 EQ 1-1/2 HP Router with T-Loc Systainer (574339)

    Festool OF 1010 EQ 1-1/2 HP Router with T-Loc Systainer (574339)

    …will fine tune your setting to the nearest 0.001" for the cleanest, most precise joints imaginable. Included guide rail attachment allows you to use the router with Festool guide rails for dadoes, edge jointing and more. Accepts 1/4" and 8mm collets (included). Includes T-Loc Systainer #3. * True…

    $435.00
  23. Rockler Rolling Utility Ladder - Ladder Hardware, Zinc

    Rockler Rolling Utility Ladder - Ladder Hardware, Zinc

    …grip the floor for stability. To move the ladder, you simply lift it slightly and roll it along the rail to the location you want. The locking wheel assembly rides along the top rail, guiding the ladder as it's repositioned. Once you've retrieved what you need, you can push the ladder up against…

    From: $27.99
  24. Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    Festool TS 75 EQ Plunge Cut Saw with New T-Loc Systainer

    …on the guide rail.* Simple, accessible blade height adjustment with one sliding indicator and built in scale.* Lightweight cast aluminum magnesium base.* Full-length channel beneath the guide rail accepts clamps for obstruction-free clamping. Clamps sold separately in the Festool FS/2 Guide Rail

    $725.00
  • Items 1 - 24 of 73
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X