Hand Rail Hardware

  • Grid List
  • Page:
    1. 1
  • Items 1 - 20 of 20
  • Page:
    1. 1
  1. L-Brackets Newel Kit for Stair Posts-L-Bracket Newel Kit

    L-Brackets Newel Kit for Stair Posts-L-Bracket Newel Kit

    Secure your newell post, hand rail, and balusters to your stairs and floor like they're set in cement! Trim parts available in Oak and Maple.* L-Bracket Fastening System with trim in your choice of Oak or Maple* Inside dimension of wood trim is 3-1/2" square* Includes four extruded L-brackets and…

    From: $15.99
  2. 6-Foot Bar Tubing-Polished Stainless Steel

    6-Foot Bar Tubing-Polished Stainless Steel

    Create a distinctive look with Stainless Steel Tubing! Perfect for hand railings, stair railing, and bar railing, each tube is hand polished to a mirror-like finish and fits with any decor. Comes in your choice of 1-1/2" or 2" diameter solid stainless steel tubing. Tubes come in 6' lengths.…

    From: $70.99
  3. Rail Bolt Fastener with Plugs

    Rail Bolt Fastener with Plugs

    …plugs fastens hand rails to newel posts and walls. Hides bolt hole under hand rail, and requires no glue, nails or screws. Includes 5/16" x 3-1/2" rail bolt, flanged nut, curved washer and two hardwood plugs to conceal drill hole (choose plug that best fits project).* Fastens hand rails to newel…

    1 Review(s)
    $6.99
  4. Long Stop for Rockler T-Track System

    Long Stop for Rockler T-Track System

    …holding solution for a wide variety of applications. The stops feature low-profile knobs that fold flat for easy clearance when belt sanding, hand planing, or scraping dried glue. Long Stops are also ideally suited for pocket hole face frame assembly. Use two Long Stops to create a square corner…

    $12.99
  5. Beadlock® Pro Joinery Kit

    Beadlock® Pro Joinery Kit

    Get incredibly strong, totally concealed joints with just your hand drill and the Beadlock Pro Kit. Beadlock® Pro does everything Beadlock® Basic does, but adds greater capacity and adjustability, plus the ability to create traditional smooth-sided mortises. Just pop the included paring…

    32 Review(s)
    $137.99
  6. Rev-A-Shelf Tall Filler Pullout Organizer w/Stainless Steel Panel (434-TF Series)-Left Hand Application (Panel Faces Right)

    Rev-A-Shelf Tall Filler Pullout Organizer w/Stainless Steel Panel (434-TF Series)-Left Hand Application (Panel Faces Right)

    …cabinets. Mix and match adjustable shelf units with hanging panel units! Please note:* These organizers are designed for new construction only* Left Hand Application: stainless panel faces out to right Technical Details:* Comes fully assembled, ready to be installed in-between cabinets* Stack 2…

    From: $339.99
  7. 6-Foot Bar Tubing-Polished Brass

    6-Foot Bar Tubing-Polished Brass

    Create a distinctive look with Solid Brass Tubing! Perfect for hand railings, stair railing, and bar railing, each tube is hand polished to a mirror-like finish and fits with any decor. Comes in your choice of 1-1/2" or 2" diameter solid brass tubing. Tubes come in 6' lengths.

    From: $111.99
  8. Short Rail Center Post-Polished Brass

    Short Rail Center Post-Polished Brass

    Easily achieve a streamlined look using Short Rail Center Posts to secure the tubing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.) Measurements (for use with 1-1/2" inch tubing):*…

    From: $17.49
  9. Short Rail End Post-Polished Brass

    Short Rail End Post-Polished Brass

    Secures and caps short rail. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* clearance/projection (CP): 2-7/16"* diameter (D): 2-15/16"Measurements…

    From: $17.49
  10. Teething Rail for Crib

    Teething Rail for Crib

    …Teething Rail! The durable plastic rail fits snugly on 3/4" thick stock and does double duty protecting your crib rail, helping it to keep its looks for the next generation. The clear plastic rail is 51" long and can be trimmed with scissors or small hand saw if necessary. Includes two rails.

    $24.19
  11. Adjustable Saddle-Brass Finish

    Adjustable Saddle-Brass Finish

    Easily attach a handrail at any angle. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* clearance/projection(CP): 2-7/8"* diameter(D): 1-1/2"Measurements (for use with 2" inch tubing):* clearance/projection(CP):…

    From: $28.99
  12. Short Rail Center Post

    Short Rail Center Post

    Easily achieve a streamlined look using Short Rail Center Posts to secure the tubing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.) Measurements (for use with 1-1/2" inch tubing):*…

    0 Review(s)
    $32.49
  13. Stair Rail and Post Fastener

    Stair Rail and Post Fastener

    Stair Rail and Post Fastener:* Fastens hand rails to newel posts * Fastens newel posts to stair riser* Requires no glue, nails, or screws* Will not loosen over time* Includes lag bolt, washer, and two hardwood plugs (Oak and Maple) to conceal drill hole

    0 Review(s)
    $4.79
  14. Short Rail End Post-Chrome / Polished Stainless Steel

    Short Rail End Post-Chrome / Polished Stainless Steel

    Secures and caps short rail. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* clearance/projection (CP): 2-7/16"* diameter (D): 2-15/16"Measurements…

    $31.49
  15. Rev-A-Shelf Tall Filler Pullout Organizer w/Stainless Steel Panel (434-TF Series)-Right Hand Application (Panel Faces Left)

    Rev-A-Shelf Tall Filler Pullout Organizer w/Stainless Steel Panel (434-TF Series)-Right Hand Application (Panel Faces Left)

    …cabinets. Mix and match adjustable shelf units with hanging panel units! Please note:* These organizers are designed for new construction only* Right Hand Application: stainless panel faces out to left Technical Details:* Comes fully assembled, ready to be installed in-between cabinets* Stack 2…

    From: $339.99
  16. 45 Degree Flush Elbow-Polished Brass

    45 Degree Flush Elbow-Polished Brass

    A 45° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-15/16"* length(L): 3"Measurements (for use with 2"…

    From: $28.99
  17. 45 Degree Flush Elbow-Polished Stainless Steel

    45 Degree Flush Elbow-Polished Stainless Steel

    A 45° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-15/16"* length(L): 3"Measurements (for use with 2"…

    From: $36.99
  18. 90 Degree Flush Elbow-Polished Brass

    90 Degree Flush Elbow-Polished Brass

    A smooth 90° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-1/4"* length(L): 2-1/4"Measurements (for use…

    From: $19.49
  19. 90 Degree Flush Elbow-Polished Stainless Steel

    90 Degree Flush Elbow-Polished Stainless Steel

    A smooth 90° bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* width(W): 2-1/4"* length(L): 2-1/4"Measurements (for use…

    From: $38.99
  20. Adjustable Saddle-Chrome Finish

    Adjustable Saddle-Chrome Finish

    Easily attach a handrail at any angle. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):* clearance/projection(CP): 2-7/8"* diameter(D): 1-1/2"Measurements (for use with 2" inch tubing):* clearance/projection(CP):…

    From: $40.49
  • Grid List
  • Page:
    1. 1
  • Items 1 - 20 of 20
  • Page:
    1. 1
Feedback X