Hand And Power Tools

  • Items 1 - 24 of 280
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockwell VersaCut Circular Saw

    Rockwell VersaCut Circular Saw

    The Rockwell VersaCut Circular Saw packs the power of a much larger saw into a one-handed tool that cuts wood, flooring, plastic, tile, slate, and metal. With blades sized at just over 3", it can't be beat for making small plunge cuts in the middle of a sheet, and unlike similar saws, it is designed…

    3 Review(s)
    $129.99
  2. Kreg® Rip-Cut Circular Saw Guide

    Kreg® Rip-Cut Circular Saw Guide

    There's no need to juggle guide rails, a pencil or tape measure. In fact, there's no measuring or marking required - just slide the fence on the Rip-Cut to any setting from 1/8" to 24" and rip a clean, straight line right down the length of the sheet. The Rip-Cut attaches easily to virtually any…

    13 Review(s)
    $34.99
  3. Work Sharp™ WS3000 Tool Sharpener

    Work Sharp™ WS3000 Tool Sharpener

    …6-foot power cord.* Cast-aluminum top; sheet metal housing; impact and vibration-resistant tool-grade plastic base. The Work Sharp WS3000 Includes: * Work Sharp unit * Two tempered glass wheels * See-through slotted wheel for underside sharpening of carving and lathe tools * Top tool rest for…

    53 Review(s)
    $199.99
  4. Worx Semi-Automatic Power Screw Driver

    Worx Semi-Automatic Power Screw Driver

    …make pilot holes before driving the screw.* Lightweight enough for one-handed operation, making it easy to hold the screw or material with the other hand.* Trigger-activated LED light illuminates dark spaces.* 4-Volt lithium battery.* Forward and reverse switch is conveniently located for one-handed…

    $49.99
  5. Festool CXS Li-Ion Cordless Drill

    Festool CXS Li-Ion Cordless Drill

    …heavy/oversized items. Not valid at Rockler Retail stores or Independent Partner Resellers. Festool is changing the way you'll look at cordless drill power with the release of their latest CXS series Li-Ion Cordless Drill! The 564 261 weighs less than 2 lbs. and features a 10.8v motor that delivers…

    $245.00
  6. Phillips Power Bits-Choose tip number and length

    Phillips Power Bits-Choose tip number and length

    …these Phillips power bits are useful for a wide variety of screw driving tasks. Ideal for use with magnetized hex-drive bit holders. Made from hardened tool steel for maximum durability. Technical Details:* Available in two tip sizes and three lengths* Made from hardened tool steel What's in…

    1 Review(s)
    From: $1.59
  7. Dewalt D28715 Heavy-Duty 14'' Chop Saw w/ Quick-Change Keyless Blade Change System

    Dewalt D28715 Heavy-Duty 14'' Chop Saw w/ Quick-Change Keyless Blade Change System

    …Blade Change System * 3 Year Limited Warranty* Ergonomically designed "D" handle provides a more comfortable hand position reducing user fatigue and increase productivity* Powerful 15.0 Amp/5.3 HP motor provides more overload capacity, increasing performance and durability* Patented tool-free,…

    $199.00
  8. Festool CT Midi Dust Extractor

    Festool CT Midi Dust Extractor

    …turns on the vacuum when the power tool is running, meaning you don't have to waste time walking back and forth. Turn off the tool and the vacuum automatically clears the hose and then shuts down for minimal noise and energy use. The flat top also serves as a mobile tool cart: simply stack up your…

    2 Review(s)
    $485.00
  9. Safety Power Tool Switch

    Safety Power Tool Switch

    …near your hip or knee and you'll never have to take your hands off the workpiece. Great for use with router tables or any workbench where you use a stationary power tool. * Includes 7' grounded cord to outlet and 2' female cord to power tool for quick plug-in and use.* Mounts to Rockler steel shop…

    140 Review(s)
    $34.99
  10. Magnetic Laser Mount for 3rd Hand Extension Tool

    Magnetic Laser Mount for 3rd Hand Extension Tool

    Accepts almost any laser, then secures to 3rd Hand Extension Tool with powerful magnets. No more need for chalk lines! Fully adjustable, with 360° rotation in three places.

    $24.19
  11. Square Drive Power Bits-For #1 Square Drive

    Square Drive Power Bits-For #1 Square Drive

    Square drive power bits have a hardened steel tip that guarantees a perfect fit and last longer with less stripouts. 1/4" hex shank. Magnetic Bit Holder has hex shank. Magnetizes drive bits.

    7 Review(s)
    From: $1.59
  12. Square Drive Power Bits-For #2 Square Drive

    Square Drive Power Bits-For #2 Square Drive

    Square drive power bits have a hardened steel tip that guarantees a perfect fit and last longer with less stripouts. 1/4" hex shank. Magnetic Bit Holder has hex shank. Magnetizes drive bits.

    7 Review(s)
    From: $1.79
  13. Power Roller for Laminates and Veneer

    Power Roller for Laminates and Veneer

    The Power Roller packs maximum pressure for applying laminates and veneer. The heavy-duty bent handle is equipped with two ribbed vinyl grips ideal for applying maximum pressure. The Power Roller non-marking roller is made of durable rubber measuring 3" long by 1" in diameter. Techincal Details:*…

    4 Review(s)
    $24.99
  14. Five Piece Power Grip Carving Set

    Five Piece Power Grip Carving Set

    …laminated steel blades, all honed and ready for immediate use! Set includes five basic tools for flat relief and figure carving. Technical Details:* 4-1/2" Handle* 1-1/8" Metal end length (1) #9 X 1/8" gouge (1) #8 X 1/4" gouge (1) 5/16" skew chisel (1) 5/16" straight chisel (1) 3/16" V parting tool

    17 Review(s)
    $46.99
  15. 3-In-1 Hand Countersink

    3-In-1 Hand Countersink

    A versatile tool that saves you a whole lot of time! No tool makes chamfers more quickly in wood. Now you can make countersinks in three different sizes. The 1/2" , 5/8" and 3/4" heads easily pop in and out.

    7 Review(s)
    $9.49
  16. Router Table Foot Pedal Power Switch

    Router Table Foot Pedal Power Switch

    …hand-free on and off operation of any bench top power tool up to 15 amps! This foot-operated pedal offers press and release ease as well as an added measure of safety, simple press it once to turn it on, and press it again to turn it off. The 78" long power cord provides you the mobility to reach…

    3 Review(s)
    $37.99
  17. The Hand Guard™ Push Block

    The Hand Guard™ Push Block

    …New Yankee Workshop! Unlike wood push sticks, this unique safety tool has self-lubricating properties to reduce kickback from blade contact! Technical Details:* Parallel guide rails on unit's underside and twin legs of heel allow Hand Guard to straddle the blade and keep fingers out of harm's way.*…

    9 Review(s)
    $17.99
  18. Drill Press Tool Collector

    Drill Press Tool Collector

    Keeps tools organized and right on hand! No more searching through the tool box for the bit you need- it's clearly visible with the tool collector! Plastic. 11" diameter. Swings out of the way when not in use. (Also a great place to keep that cup of coffee!)

    13 Review(s)
    $15.49
  19. Magnetic Power Strip Mount for Best Fence System

    Magnetic Power Strip Mount for Best Fence System

    …extra power? Attach any power strip quickly and easily with the Magnetic Power Strip Mount. Simply fasten your power strip to the Magnetic Power Strip Mount; 16 strong rare earth magnets take it from there! Magnets are mounted on a curve to fasten tightly to the Best Fence miter saw stand, 3rd Hand

    $29.99
  20. FastCap 3rd Hand HD Extension, 5'-12'

    FastCap 3rd Hand HD Extension, 5'-12'

    …capacity.* Magnetic Laser Mount (25900, sold separately) secures to the 3rd Hand HD with powerful magnets and accepts almost any laser* The 3rd Hand HD Carrying Bag (28138, sold separately) conveniently stores up to four 3rd Hands and their accessories. Everything you need in one bag!* Universal…

    18 Review(s)
    $41.99
  21. FastCap 3rd Hand HD Extension, 2 Pack

    FastCap 3rd Hand HD Extension, 2 Pack

    …capacity.* Magnetic Laser Mount (25900, sold separately) secures to the 3rd Hand HD with powerful magnets and accepts almost any laser* The 3rd Hand HD Carrying Bag (28138, sold separately) conveniently stores up to four 3rd Hands and their accessories. Everything you need in one bag!* Universal…

    18 Review(s)
    $79.99
  22. Flexcut® SK735 7/16'' Macaroni Carving Tool

    Flexcut® SK735 7/16'' Macaroni Carving Tool

    …blades.* Use with the Flexcut® SK100 ABS Handle for Interchangeable Carving Tools (20219, sold separately).* With the appropriate adapter, Flexcut's interchangeable carving tools can also be used with a reciprocating power carver.* Blades are pre-sharpened and pre-honed so they're ready to use…

    $16.49
  23. Dremel 9100-21 Fortiflex Flexible Shaft Rotary Tool

    Dremel 9100-21 Fortiflex Flexible Shaft Rotary Tool

    …heavy-duty power makes the Fortiflex the ideal rotary tool for projects requiring both precision and power. Dexterity is further improved by a variable-speed foot pedal, which lets you match the tool speed to the application without added weight or tension in your hands. The tool's 2.5 AMP…

    $239.00
  24. Heel Replacements for The Hand Guard Push Block

    Heel Replacements for The Hand Guard Push Block

    Set of six replacement heels for the Hand Guard™ Push Block. Adjustable replacement feet let you safely push different wood thicknesses on your table saw! Feet also rotate into closed position for shaping operations. Made of durable plastic.

    1 Review(s)
    $12.99
  • Items 1 - 24 of 280
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X