Hand Plane

  • Items 1 - 24 of 93
  • Page:
    1. 1
    2. 2
    3. 3
  1. Bailey Smoothing Plane #04 by Stanley

    Bailey Smoothing Plane #04 by Stanley

    The Stanley Model 12-904 Bailey® Smoothing Plane is a fine general-purpose bench plane. It has a cast-iron base with precision-ground sides and 9-3/4" long bottom. It features a fully machined and polished double-iron cutter and lever, and the 2" wide cutter is made from hardened, tempered steel…

    3 Review(s)
    $64.99
  2. Stanley Sweetheart Low Angle Jack Plane

    Stanley Sweetheart Low Angle Jack Plane

    …base are cast as one piece to greatly reducechatter and make planing more effective and enjoyable. Hone the iron before use toachieve exceptionally fine shavings. Technical Details:* Finely machined solid brass adjustment hardware * Plane iron is honed to an angle of 25° and is micro-adjustable…

    4 Review(s)
    $159.99
  3. Stanley Sweetheart Bench Plane

    Stanley Sweetheart Bench Plane

    This solidly constructed bench plane from Stanley features an iron made from 1/8"steel for prolonged edge retention superior to most other planes, base and frog castas a single piece to virtually eliminate chatter and make planing more effective andenjoyable, Norris type adjuster with lateral lock…

    4 Review(s)
    $159.99
  4. Stanley Sweetheart Low Angle Block Plane

    Stanley Sweetheart Low Angle Block Plane

    …(2-1/8" W x 6-1/2" L) ensures smooth and accurate planing. Frog and base are cast as one piece to greatly reduce chatter and make planing more effective and enjoyable. The iron is made from 1/8" steel for edge retention superior to most other planes. Also features Norris-style adjustment with…

    7 Review(s)
    $89.99
  5. Stanley® Sweetheart No. 92 Premium Shoulder Plane

    Stanley® Sweetheart No. 92 Premium Shoulder Plane

    …heritage, Stanley's dual-purpose No. 92 Shoulder Plane is accurate, versatile and built to last! Use this two-in-one tool as a shoulder plane for cleaning up shoulders on tenons. Or, with one quick change, you're ready to use it as a chisel plane for cleaning up glue joints, trimming 90° inside…

    $109.99
  6. Carbide-Tipped Radius Plane or Chamfer Plane-Radius plane

    Carbide-Tipped Radius Plane or Chamfer Plane-Radius plane

    Get a consistent edge and easy-to-use operation with this radius plane that cuts a clean rounded edge. Features two carbide-tipped blades and comes with a 4mm hex wrench for easy adjustment.

    13 Review(s)
    From: $11.99
  7. Bailey Jack Plane #05 by Stanley

    Bailey Jack Plane #05 by Stanley

    The Stanley Model 12-905 Bailey Jack Plane is designed for rapid stock removal when preparing timber before finishing. Double-iron cutter and lever provide maximum control, even over extremely rough stock. Machined frog and cutter seatings help eliminate blade chatter. Base is 14" long. Honing…

    3 Review(s)
    $74.99
  8. Cherry by the Piece-1/4" Thickness

    Cherry by the Piece-1/4" Thickness

    …red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited…

    5 Review(s)
    From: $4.99
  9. Stanley Model 12-960 Bailey Low-Angle Block Plane

    Stanley Model 12-960 Bailey Low-Angle Block Plane

    Stanley's Model 12-960 Bailey Low-Angle Block Plane is ideal for planing end grain and plastic materials. Made from hardened, tempered steel for durability, the 13-1/2° low-angle cutter keeps vibration to a minimum, creating a fine finish. Measuring 1-3/8" wide, the cutter adjusts for depth and…

    1 Review(s)
    $49.99
  10. Stanley Sweetheart Block Plane

    Stanley Sweetheart Block Plane

    …(2-1/8" W x 6-1/2" L) ensures smooth and accurate planing. Frog and base are cast as one piece to greatly reduce chatter and make planing more effective and enjoyable. The iron is made from 1/8" steel for edge retention superior to most other planes. Also features Norris-style adjustment with…

    2 Review(s)
    $89.99
  11. Stanley Model 12-951 Flat-Base Spokeshave

    Stanley Model 12-951 Flat-Base Spokeshave

    …as shaping chair seats and legs. It features 2-1/8" wide cutters that are fully adjustable for depth of cut and thickness of shavings, and the blade is replaceable. The tool measures 10" in length and comes with a vinyl pouch that protects the plane when not in use. Honing recommended before use.

    3 Review(s)
    $34.99
  12. Woodworker's Guide to Handplanes

    Woodworker's Guide to Handplanes

    …a huge variety of handplanes plus plans for making a handful of your very own! The author breaks every plane down into six basic elements that are common to every plane, and demonstrates how they work. You'll also learn about planes from countries across the globe, including Japan and China.…

    $35.00
  13. African Mahogany by the Piece-1/8" Thickness

    African Mahogany by the Piece-1/8" Thickness

    …rot fungi. Moderately resistant to dry-wood termite attack.* Weathering Properties: Very good - a great choice for boat building.* Planing: The wood is easy to plane, but figured grain may chip and tear.* Turning: Easy - turned surfaces are usually clean.* Polishing characteristics: Good.* Steam…

    4 Review(s)
    From: $4.99
  14. Groz Hand Planes-Low Angle Block Plane

    Groz Hand Planes-Low Angle Block Plane

    …steel blades hold an edge longer than standard plane blades! Planes are engineered to exact tolerances while maintaining traditional standards of workmanship, design and performance. Choose from the Low Angle Block Plane and #4 Smoothing plane. Honing recommended before use.* Blades are 95% carbon…

    19 Review(s)
    $36.99
  15. Solid Wood Edging

    Solid Wood Edging

    …shape the edge using various router bits. Plus, pieces are planed to eliminate having to scrape or sand out saw kerf marks. Solid wood edging is perfect for furniture and other projects where a solid look is needed! Easily applied by hand with contact cement or other adhesives. Strips measure 7/8"…

    3 Review(s)
    $10.19
  16. Cabinet Scraper Set

    Cabinet Scraper Set

    This Cabinet Scraper Set contains a 2-3/4" x 4-3/4" gooseneck, 2" x 5-3/4" round end and 2-3/8" x 5-7/8" straight scraper for concave, convex and flat areas. Cabinet scrapers are great for removing milling marks and final smoothing. Optional 10" Smooth Mill File (sold separately) is ideal for truing…

    13 Review(s)
    $21.99
  17. Supermax 19-38 Drum Sander

    Supermax 19-38 Drum Sander

    …consistency, giving you the benefits of a wide belt sander at a price that won't break the bank. Gone are the dips, gouges and sore arms of the hand sanding process. The 19-38 Drum Sander offers 19" width sanding in a single pass and 38" in a double pass, perfect for flattening and smoothing raised…

    1 Review(s)
    $1,399.00
  18. Nicholson Cabinetmaker Files

    Nicholson Cabinetmaker Files

    …(8" and 10") files. Each sold separately. File handle (sold separately) holds most popular files. Contoured to fit hand for straight, lathe and draw filing. * #12492 - 8" Four-in-One hand Rasp and File is four tools in one. Each side has both a rasp for solid stock removal and a double cut file for…

    4 Review(s)
    From: $19.49
  19. Video Companion to Exercises in Wood-working Part 1 DVD

    Video Companion to Exercises in Wood-working Part 1 DVD

    …in 1889. Popular Woodworking Magazine's editor Christopher Schwarz teaches basic tool functions and uses of the chisel, gouge, hammer, jack plane, marking gauge, rip saw, and the cross-cut saw. You'll also enjoy the 1889 "Treatise on Wood" along with 39 PDF pages of information on the structure,…

    $26.29
  20. Handtool Kit for Tormek Sharpening Systems HTK-705

    Handtool Kit for Tormek Sharpening Systems HTK-705

    …scissors, shears, draw knives and axes, as well as short chisels and carving tools. Each jig perfectly replicates the edge angle so you can sharpen hand tools faster than ever. This kit works with both the T-7 and T-3 Tormek Sharpening Systems. Technical Details:* The Knife Jig works to sharpen most…

    1 Review(s)
    $215.00
  21. Carbide-Tipped Radius Plane or Chamfer Plane-Chamfer plane

    Carbide-Tipped Radius Plane or Chamfer Plane-Chamfer plane

    Get a consistent edge and easy-to-use operation with this chamfer plane that makes an attractive beveled edge. Features two carbide-tipped blades and comes with a 4mm hex wrench for easy adjustment.

    13 Review(s)
    From: $11.99
  22. Microplane® with Interchangeable Blades

    Microplane® with Interchangeable Blades

    Reversible razor-sharp blades may be turned for use on the pull or push stroke.* Offset handle has comfortable grip and gives you great control.* Comes with 2 flat blades.* Replacement blades available in round and right angle.

    1 Review(s)
    $20.99
  23. Bahco Ergo Pocket Scraper

    Bahco Ergo Pocket Scraper

    The Bahco Ergo Pocket Scraper is ideal for removing paint or putty from windows, window frames, molding, and narrow corners. The triangular blade has three straight sharp edges, ensuring a long work life. A thumb grip handle makes the scraper easy and comfortable to use. Comes with a convenient belt…

    2 Review(s)
    $24.99
  24. 60-Grit Aluminum Oxide Sharpening Belt for ProEdge Plus Sharpening System

    60-Grit Aluminum Oxide Sharpening Belt for ProEdge Plus Sharpening System

    Replacement 60-grit aluminum oxide belt for use with the Robert Sorby ProEdge Plus Sharpening System (26342, sold separately). Aluminum oxide belts are ideally suited for sharpening bench chisels, carving tools and plane irons.

    $5.99
  • Items 1 - 24 of 93
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X