Hex Screws

  • Items 1 - 24 of 97
  • Page:
    1. 1
    2. 2
    3. 3
  1. Connector Bolts-Black Oxide

    Connector Bolts-Black Oxide

    Statuary Bronze or Black Oxide finished steel bolts for joining wood together. Ideal knock-down fitting for rapid assembly and disassembly of knock-down furniture.* Cap Nut shown is sold separately and fits all length bolts available below.* 1/4" - 20 thread with 4 mm hex drive* Sold in packs of 8

    23 Review(s)
    From: $4.49
  2. Festool Kapex Clamping Kit

    Festool Kapex Clamping Kit

    Use the Clamping Kit to secure the Kapex sliding compound miter saw to the Festool Multifunction Table. Hex bolts drop into the Kapex deck base as captured nuts, and are easily secured beneath the MFT with the oversized knobs. Pack of 2 clamping knobs with bolts.

    $21.00
  3. Confirmat Screws-Select Size

    Confirmat Screws-Select Size

    Ideal for particle board. Statuary bronze finish. Use 4mm hex drive. Requires a 7/32" pilot hole. 8 per pack. Optional Bin Boxes are available with your order.

    From: $3.49
  4. Hex Bolts with Nuts-1/4 Hex Bolts

    Hex Bolts with Nuts-1/4 Hex Bolts

    These hex cap screws are used to fasten nearly all types of hard materials, especially useful in metal-to-metal connections, or where heavy-duty fastening is required. Commonly used with flat or lock washers. Corresponding nuts are included. Available in a range of sizes to suit your needs Technical…

    $1.29
  5. Adjustable Table Leg Set (Set of 4 Legs)

    Adjustable Table Leg Set (Set of 4 Legs)

    …exact height you want it - great for shared work stations, kids and adults! Technical Details:* Set includes four legs with mounting screws, hex key and set screws* Telescoping legs adjust on 1" centers and feature 9" height adjustment* 28-3/4" maximum height (19-3/4" minimum)* 150 lb. load rating…

    10 Review(s)
    $64.99
  6. Pro Grabit® Pro-Grade Screw and Bolt Extractor

    Pro Grabit® Pro-Grade Screw and Bolt Extractor

    …damaged screws and bolts in two easy steps. Each of the four dualendedbits in this set feature a burnishing tip to prepare the screw or bolt for removaland a threaded tip to grip and extract them when powered with a 3/8" drill. Removesmany types of screws up to 4" in length including hex, Phillips,…

    3 Review(s)
    $28.99
  7. Worx Semi-Automatic Power Screw Driver

    Worx Semi-Automatic Power Screw Driver

    …LED light. Includes 11 driver bits and screw starter drill bit. Includes 2 Bit Cartridges with the following bits:* Torx Bits: T10 & T20* Hex Bits: H3, H4, & H5* Phillips Bits: P0, P1, & P2* Slotted Bit: SL4* Square Bits: SQ1 & SQ2* Screw Starter Bit Technical Details:* Slide action…

    $49.99
  8. Hex Bolts with Nuts-5/16 Hex Bolts

    Hex Bolts with Nuts-5/16 Hex Bolts

    These hex cap screws are used to fasten nearly all types of hard materials, especially useful in metal-to-metal connections, or where heavy-duty fastening is required. Commonly used with flat or lock washers. Corresponding nuts are included. Available in a range of sizes to suit your needs Technical…

    $1.29
  9. Zinc Coated Hex Nuts

    Zinc Coated Hex Nuts

    Bright, durable zinc coating will keep these finished hex nuts looking clean and corrosion-free for years to come. Choose from three sizes, each in packs of eight.

    From: $0.49
  10. Hex Head Power Bit

    Hex Head Power Bit

    Use this 4 mm Hex Head Power Bit to install connector bolts and cap nuts. Recommended for use with a magnetic drive bit holder. Made from hardened tool steel for maximum durability.What's in the Box One 4 mm hex head power bit. Best Used With Magnetic Bit Holder for Hex Drives. Available below (Item…

    $1.59
  11. 1/4'' Hex x 3'' Magnetic Bit Holder

    1/4'' Hex x 3'' Magnetic Bit Holder

    You'll never drop a screw again with the 1/4" Hex x 3" Magnetic Bit Holder from Lutz®! A strong magnet holds the bit inside the socket while you work. Made from heat-treated S-2 tool steel for durability. Technical Details:* Strong magnet holds the bit inside the socket while you work* Lutz®…

    $3.29
  12. 16-Pc. Hex Key and Precision Screwdriver Set

    16-Pc. Hex Key and Precision Screwdriver Set

    …handles,and chrome-finished blades that resist rust and corrosion. Pen-style pocketscrewdriver accepts 1/4" hex bits for compact performance. Technical Details:* Contents: folding hex key set, folding screwdriver set, folding ball-point hexkey set, "pen-style" precision pocket…

    1 Review(s)
    $19.99
  13. Bolt Size-It Gauge

    Bolt Size-It Gauge

    Quickly and easily size bolts, screws, nuts and twist drills! Bolt Size-It also features ruler marked with inches and millimeters.* Gauge metric hex nuts and washers by holding under metric holes.* Resists water, alcohol, oil and grease.* Hard plastic.

    4 Review(s)
    $5.49
  14. Torx Driver T-25 2" (For #9 Screws) (2 per Pack)

    Torx Driver T-25 2" (For #9 Screws) (2 per Pack)

    These 2" bits are sized to drive #9 screws with the Torx six-point star-shaped head design and feature 1/4 hex shanks for easy use with a quick-change chuck. Pack of 2.

    $8.39
  15. Torx Driver T-15 2" (For #6 and #8 Screws) (2 per Pack)

    Torx Driver T-15 2" (For #6 and #8 Screws) (2 per Pack)

    These 2" bits are sized to drive #6 and #8 screws with the Torx six-point star-shaped head design and feature 1/4 hex shanks for easy use with a quick-change chuck. Pack of 2.

    $8.39
  16. Cap Nuts for Connector Bolts

    Cap Nuts for Connector Bolts

    Cap nuts work with connector bolts for surface to surface application. Use these with 1/4", #20 thread connector bolts. * 11/16" long. * Can be used with 5 mm hex driver.* 8 per pack.* Bolt shown is not included with cap nut.

    3 Review(s)
    $5.39
  17. 7-Pc. Split Collar Set

    7-Pc. Split Collar Set

    …collars for 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2" size bits. 1/8" hex key also available (two per pack). Select the proper collar diameter, slide it onto the drill bit, and tighten the single 1/8" hex screw. The split ring design tightens fully around the drill bit securing it in…

    9 Review(s)
    $14.49
  18. Nova Chuck Fastening Spares Kit

    Nova Chuck Fastening Spares Kit

    …The kit contains eight M6 screws, two hex wrenches, a grubscrew, and a fiber washer. * Used to secure accessory jaws to your Nova chucks.* Comes standard with all Nova chucks.* Handy pack to have on hand in the event a fastener is lost.* Includes (8) Nova chuck screws, hex wrenches, grubscrew and…

    $11.99
  19. White Crib Hardware Kit

    White Crib Hardware Kit

    …Plan with Fixed Sides (30704, sold separately). Includes mattress spring, cylinder nuts, connector bolts, hex key wrench, hex-head machine screws, height-adjustment brackets, wood screws and clear teething rail. White finish. Also available in brown, nickel and brass finishes (all sold separately).

    $138.59
  20. Nickel Crib Hardware Kit

    Nickel Crib Hardware Kit

    …Plan with Fixed Sides (30704, sold separately). Includes mattress spring, cylinder nuts, connector bolts, hex key wrench, hex-head machine screws, height-adjustment brackets, wood screws and clear teething rail. Nickel finish. Also available in white, brown and brass finishes (all sold separately).

    $138.59
  21. Brass Crib Hardware Kit

    Brass Crib Hardware Kit

    …Plan with Fixed Sides (30704, sold separately). Includes mattress spring, cylinder nuts, connector bolts, hex key wrench, hex-head machine screws, height-adjustment brackets, wood screws and clear teething rail. Brass finish. Also available in white, brown and nickel finishes (all sold separately).

    $138.59
  22. Brown Crib Hardware Kit

    Brown Crib Hardware Kit

    …Plan with Fixed Sides (30704, sold separately). Includes mattress spring, cylinder nuts, connector bolts, hex key wrench, hex-head machine screws, height-adjustment brackets, wood screws and clear teething rail. Brown finish. Also available in white, nickel and brass finishes (all sold separately).

    $138.59
  23. Pen Mill Barrel Trimmers

    Pen Mill Barrel Trimmers

    Clear excess adhesive from your pen tubes and square up the ends of your pen in one easy step! These Pen Mill Barrel Trimmers measure 7/8" long and include hex wrenches for adjustment and replacement. They feature double hex-head screws for a secure connection to the Pilot Shaft.

    8 Review(s)
    From: $14.99
  24. Fuller 1/4'' Quick Change Taper Drill Set

    Fuller 1/4'' Quick Change Taper Drill Set

    …cutters (3/8" and 1/2"), and two hex socket wrenches. Technical Details:* For wood screw sizes #6, #8, #10, #12 and #14.* Countersinks have 4-flute design for smooth, clean holes and are adjustable along the twist length of the drill with two hex socket screws.* Drill bits are manufactured to…

    1 Review(s)
    $169.99
  • Items 1 - 24 of 97
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X