Hinge Guide

  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
  1. Porter-Cable Door Hinge Template

    Porter-Cable Door Hinge Template

    Porter-Cable's unique door hinge routing template is highly adjustable, allowing you to rout hinge mortises for various door thicknesses and hinge lengths. Once adjusted, just tap the included double-headed nails through the guide holes to hold it in place, and rout out your hinge mortise with the…

    $37.99
  2. Incra® HingeCrafter

    Incra® HingeCrafter

    …vertical hinge applications such as cabinet doors.* Make any hinge length up to 10-1/2" with the included drill bit; your only limit is twice the useable length of your drill bit.* Kit includes HingeCrafter with drill guide bushings already installed, instructions, drill bit, and two 6" brass hinge

    1 Review(s)
    $109.99
  3. JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    JIG IT® for Concealed Hinges, Multi-Tool Rail Master Pack

    …European-style hinges – with a single setup! The Master Pack includes a 30" rail, two alignment plates, one bit guide and a stop block for positioning the jig on a door. Additional JIG IT® templates (sold separately) can be added for doors requiring three or more hinges. Mounting plate JIG…

    14 Review(s)
    $93.99
  4. Rockler Concealed Hinge Router JIG IT®

    Rockler Concealed Hinge Router JIG IT®

    …have space for a drill press. Since your hinge mounting screws serve double-duty as clamps, setup is simple. Just screw it on, rout and repeat!* Can be adjusted for either 3mm or 5mm tabs.* Designed for Blum hinges.* Use with the 5/8" Short-Shank Guide Bushing, (specially designed for 1/4" template…

    10 Review(s)
    $17.99
  5. Kreg Toolboxx w/Pocket Hole Start Up Kit

    Kreg Toolboxx w/Pocket Hole Start Up Kit

    …interior.* 9-3/4" x 12" x 22" overall.* 11 removable bins in upper compartment for screws and plugs.* Long trays hold drill and driver bits.* Clear hinged lid for better visibility.* 6-1/2" x 9" x 18" lower compartment for Kreg Jigs®, clamps, and accessories.* Padded flip-up handle for comfort…

    $106.00
  6. Festool Hole Drill Set with T-Loc Systainer

    Festool Hole Drill Set with T-Loc Systainer

    …1010 router and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately), to cover any size job. Set Includes:* Guide plate * Centering mandrel* 2 edge stops* 2 linear stops* 2 clamps* Operating wrench* 35 mm carbide-tipped European hinge boring bit* 2…

    $495.00
  7. 1/2'' Pattern Router Bit

    1/2'' Pattern Router Bit

    …this straight bit is ideally suited for routing hinge mortises and shallow dadoes. At 1/2" wide, you can rout dadoes in multiple passes to precisely fit stock of almost any thickness. Two flutes for fast, smooth, accurate trim cuts. Ball-bearing guide makes it ideal for pattern or template cutting.…

    5 Review(s)
    $18.99
  8. Kreg DB110 ''Foreman'' Semi-Automatic Pocket Machine

    Kreg DB110 ''Foreman'' Semi-Automatic Pocket Machine

    …capacity and quick drill bit changes.* With clamping cylinder for hands-free clamping.* Hinge-top design allows easy access to the drill bit, drill guide and motor.* Fence has two floating stops.* Overhead lever activates clamp and drilling operation in one motion.* To operate, simply position your…

    1 Review(s)
    $795.00
  9. Pro Shelf Drilling Jig

    Pro Shelf Drilling Jig

    …Euro hinge system* 24" long twin template tracks are joined by rigid rails that lock in place for error-free drilling* Drill two rows with one jig to save time and ensure accuracy* Locking 3-star tracking knobs allow for adjustments and ensure the jig stays firmly in place* Reversible guide rails…

    16 Review(s)
    $84.99
  10. How to Make Bookshelves and Bookcases, Book

    How to Make Bookshelves and Bookcases, Book

    …storage projects from the pages of American Woodworker is sure to help you organize and beautify your home. Extensive instructionals on techniques guide the beginner and challenge the expert: sliding dovetails, torsion-box construction, floating shelves, and more. Each project includes step-by-step…

    $19.95
  11. Festool Carvex Accessory Kit

    Festool Carvex Accessory Kit

    …Jigsaw.* Also allows you to use the Carvex with a Festool Guide Rail (sold separately). Circle Cutter (497304)* Used to make precise circle and arc cuts.* Extends for circles between 4-3/8-inch and 9' 10-1/8-inch in diameter.* Guide Rail Base (Festool #497303) is included.* Radius blade retracts…

    $200.00
  12. Murphy Door Bookcase Hardware - Build A Secret Passage Door!

    Murphy Door Bookcase Hardware - Build A Secret Passage Door!

    …instructions guide you in locating and installing the hinges. Installation is simple - just set the Murphy Doorbookshelf into place, shim to level and plumb, and attach! Even a novice can install the door in less than half a day. The door can be installed so that the hinges are on either…

    $129.95
  13. Router Bushing Set

    Router Bushing Set

    …duplication work, cutting dovetails, cutting custom signs, or following your favorite templates. Includes 1/2" and 1/4" Dovetails, a Stanley F 3, Butt Hinge, Lock Face, two general bushings, and two locking nuts. All fit in a convenient plastic case. Technical Details: * 1/2" Dovetail Gd bushing:…

    2 Review(s)
    $43.99
  14. Template Guide Lock Nut

    Template Guide Lock Nut

    Use to secure Router Template Guide Bushings 43646, 43877, 60531, 60549, 63065, 63073 and 60540 (sold separately) to any router base with a 1-1/4" diameter center hole.

    $4.99
  15. Router Guide Bushing Kit

    Router Guide Bushing Kit

    Our 11-piece template guide kit will work with any template, pattern or jig for perfect duplicate routing. Ideal for stair, pattern and hinge routing, dovetailing and craft/hobby work. Fits any base with a 1-3/16" diameter center hole. Also available from Rockler, the Guide Bushing Router Plate…

    45 Review(s)
    $41.99
  16. Festool Guide Rail for LR 32 Hole Drilling System

    Festool Guide Rail for LR 32 Hole Drilling System

    …machine holes for shelf pins and 35mm cup hinges. As part of an integrated system, it also can be used with Festool plunge saws and jigsaws for expanded capability. Features:* Hard-anodized surface.* Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action.*…

    $315.00
  17. Logan 350-1 Compact Elite Mat Cutter

    Logan 350-1 Compact Elite Mat Cutter

    …for precise results.* Nylon guides allow you to hook cutters onto the side of the guide rail.* 32" cutting capacity.* Hinged guardrail for easy removal of mats.* Adjustable guide for border widths from 3/4" to 4-1/4".* Push-style bevel cutter hooks onto edge of guide rail for precise cutting.*…

    $179.99
  18. Lift-O-Mat® Gas Spring Lid Support

    Lift-O-Mat® Gas Spring Lid Support

    …get soft and quiet closing, plus smooth motion and stopping. Each set includes two gas springs and four mounting brackets. (Screws not included). Available in Black (Silver shown not available). Note: See the Selection Guide below for more information on choosing the correct Gas Spring Lid Support

    21 Review(s)
    $48.29
  19. Festool HL 850 E Planer with New T-Loc Systainer

    Festool HL 850 E Planer with New T-Loc Systainer

    …spiral blade requires no complicated adjustments* Soft start motor* Maintains constant RPM under load* Thermal overload protection* Dust hose can be mounted on the left or the right; hinged baffle is knob-actuated Includes:* HL 850 E Planer* Parallel guide* Rabbet depth guide* New T-Loc Systainer

    1 Review(s)
    $615.00
  20. Bosch Colt™ Variable-Speed Palm Router Kit

    Bosch Colt™ Variable-Speed Palm Router Kit

    …template guides. #22142 Round Sub base accepts the Bosch RA-Series Template Guides. #37072 (RA1100) Template Guide Adapter for threaded templates allows use of conventional threaded template guides with the #22142 (PR009) round sub base. Allows you to use Porter-Cable template guides in the…

    23 Review(s)
    $129.99
  21. Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    …Euro hinge system* 24" long twin template tracks are joined by rigid rails that lock in place for error-free drilling* Drill two rows with one jig to save time and ensure accuracy* Locking 3-star tracking knobs allow for adjustments and ensure the jig stays firmly in place* Reversible guide rails…

    $111.47
  22. Jet® 17'' Floor Mount Drill Press

    Jet® 17'' Floor Mount Drill Press

    …dual laser guide system provides a consistent drilling crosspoint on workpiece * Innovative extra large 14" x 18" work table features twin T-slot grooves for miter gauge or homemade jigs, table has lip designed edge for easy clamping of workpiece and a removable insert * Hinged metal belt and…

    1 Review(s)
    $609.99
  23. Making Heirloom Boxes

    Making Heirloom Boxes

    Guided by an experienced woodworker and hundreds of photos, enjoy a full course that covers everything: sourcing and seasoning different woods; choosing and using tools and equipment, and mastering basic techniques (mapping out the design, making dovetails, assembling the internal pieces), and more.…

    $17.95
  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
Feedback X