Insert Tool

  • Items 1 - 24 of 188
  • Page:
    1. 1
    2. 2
    3. 3
  1. Power Drive Threaded Insert Tool

    Power Drive Threaded Insert Tool

    Choose the right tool for your job! For driving threaded inserts with slotted heads accurately and quickly, choose the Power Drive Threaded Insert Tool. Works with most variable-speed drills.* All-steel construction* Recommended for inserts with screwdriver slot at the top* Made in USA

    10 Review(s)
    From: $10.99
  2. Riveting T-Nut Inserting Tool

    Riveting T-Nut Inserting Tool

    …once the bolt is inserted, sometimes resulting in the prongs stripping out the wood. The Riveting T-Nut system prevents this problem by permanently securing the T-nut to the panel with the Riveter Insertion Tool. Simply set the T-nut first with a hammer, then thread the insertion tool into it with a…

    8 Review(s)
    $11.49
  3. Pen Tube Insertion Tool

    Pen Tube Insertion Tool

    …getting glue all over your fingers. Tapered shaft gently wedges into your pen tubes for a secure grip, allowing you to rotate the tubes for smooth insertion and optimum glue coverage. Since it only contacts the rim, the shaft won't adhere to the glue. Works with any pen tube from 7mm to 11mm.

    3 Review(s)
    $8.99
  4. Thread Detective Screw Gauge

    Thread Detective Screw Gauge

    Whether you're trying to identify loose screws or you just want to figure out which nuts and bolts to use where, the Thread Detective is the perfect tool. Available in standard or metric, it features clearly marked gauges for quick identification ofbolt size, nut diameter and thread pitch. Standard…

    34 Review(s)
    $17.99
  5. Micro Jig Splitter™ SteelPRO System, 1/8'' Kerf

    Micro Jig Splitter™ SteelPRO System, 1/8'' Kerf

    …are simple to install and simple to use. We include an easy to follow drill-guide template to install the SteelPro System into your Zero Clearance Insert (ZCI). Keep using the MJ Splitter™ SteelPro with Plug N' Play ease. Remount and remove the Splitters in two seconds. Make no compromises in…

    $39.99
  6. Phenolic Table Saw Insert Kit

    Phenolic Table Saw Insert Kit

    …Just use our exclusive Phenolic Countersink Drill Bit (34423, sold separately) for the leveler holes. It is machined especially for phenolic, cuts quickly and won't wander. * Insert Kit includes two phenolic plates with 12 screws for leveling.* Phenolic plates measure 3-7/8" x 14" x 1/2" thick.

    31 Review(s)
    $31.99
  7. Framer's Pliers

    Framer's Pliers

    Top quality pliers inserts points quickly and uniformly for a neat and attractive appearance. Just squeeze handle of this pliers to quickly drive points or brads. Inserts points and brads into wood frames to 3" wide and 1.5" deep. Rubber cushion protects frame finish. Framer's Points Approximately…

    6 Review(s)
    $49.99
  8. Triton Oscillating Spindle Sander

    Triton Oscillating Spindle Sander

    …precision finish.* Includes 6 sanding sleeves with matching rubber drums and table inserts.* Large cast iron table for stability and enhanced material support.* Locating holes for secure bench mounting.* Table inserts prevent gaps between table and sanding surface.* On-board storage keeps all…

    $169.99
  9. Zero Clearance Bandsaw Insert

    Zero Clearance Bandsaw Insert

    …plastic inserts snap in to replace your old, beat-up throat plate. Ideal for scrollwork, small or fragile parts, and woods prone to splintering, these inserts provide a solid base for your workpiece at very little cost. Will not dull your saw teeth. Sold in sets of 5. * Delta inserts are 2-1/2"…

    26 Review(s)
    $10.99
  10. Bench Dog® Zero Clearance Insert

    Bench Dog® Zero Clearance Insert

    Use this zero clearance insert with small bits and small pieces of stock. Prevents small stock from falling into the router bit opening. Resists melting and won't harm your router bits. Fits older metal-insert style ProLifts and ProPlate Aluminum models.

    $19.99
  11. Jet® Dado Blade Throat Insert

    Jet® Dado Blade Throat Insert

    …melamine face.* Close tolerance reduces tearout on the margins of dado cuts.* Four top-access leveling screws ensure the throat plate is level with the surfaceof the table saw.* Two rear tensioners keep the throat insert from rattling.* Lightweight construction.* Measures 4"W x 14"L x 3/8" thick.

    $59.99
  12. Mortise Chisel Insert - 1/2"

    Mortise Chisel Insert - 1/2"

    Cut clean mortises by hand! The 1/2" Mortise Chisel Insert allows you to do hand square mortises quickly and accurately without having to set up your mortise machine. Works with the Mortise Chisel Handle (#43610 Sold Separately).

    $14.49
  13. Mortise Chisel Insert - 1/4"

    Mortise Chisel Insert - 1/4"

    Cut clean mortises by hand! The 1/4" Mortise Chisel Insert allows you to do hand square mortises quickly and accurately without having to set up your mortise machine. Works with the Mortise Chisel Handle (#43610 Sold Separately).

    $14.49
  14. Mortise Chisel Insert - 3/8"

    Mortise Chisel Insert - 3/8"

    Cut clean mortises by hand! The 3/8" Mortise Chisel Insert allows you to do hand square mortises quickly and accurately without having to set up your mortise machine. Works with the Mortise Chisel Handle (#43610 Sold Separately).

    $14.49
  15. 1" X 8 TPI Insert

    1" X 8 TPI Insert

    Required accessory to mount the 4" Face Plate (91008, sold separately) to a lathe with a 1" x 8 tpi drive spindle.

    $9.99
  16. Rockler Router Plate Insert Without Opening

    Rockler Router Plate Insert Without Opening

    The interchangeable insert without an opening features a 4'' OD allowing this insert to fit into a standard plate with a 3-1/4'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate A* Makita 1100* Milwaukee 5615-5624* DeWalt 616-618* Bosch 1617- 161* Rigid 2930 Combo Kit*…

    $8.49
  17. Large Router Plate Insert without Opening

    Large Router Plate Insert without Opening

    This interchangeable insert without an opening features a 4-3/8" outside diameter, allowing it to fit into a router plate with a 3-11/16" opening. Fits The Following Router Table Plates: Group C * Porter-Cable 7518* Porter-Cable 7519* Porter-Cable 7538* Porter-Cable 7539* Milwaukee 5625-20* Triton…

    $7.39
  18. #2 Phillips x 1'' Drywall Dimpler Insert Bit

    #2 Phillips x 1'' Drywall Dimpler Insert Bit

    …power bits like this #2 Phillips x 1" Drywall Dimpler Insert Bit are made from heat-treated S-2 tool steel for maximum durability and longer life! Technical Details:* Lutz® high-performance drywall dimpler bit* Made from heat-treated S-2 tool steel for maximum durability and longer life

    $1.59
  19. Rockler Router Plate Insert With 1-1/2" Opening For Large Plates

    Rockler Router Plate Insert With 1-1/2" Opening For Large Plates

    The interchangeable insert for standard bits features a 1/2'' opening. The 4-3/8'' OD allows this insert to fit into a standard plate with a 3-11/16'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate C* Porter Cable 7518* Porter Cable 7519* Porter Cable 7538* Porter…

    $6.99
  20. Rockler Router Plate Insert With 2-1/2" Opening For Standard Plates

    Rockler Router Plate Insert With 2-1/2" Opening For Standard Plates

    The interchangeable insert for standard plates features a 2-1/2'' opening. The 4'' OD allows this insert to fit into a standard plate with a 3-1/4'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate A* Makita 1100* Milwaukee 5615-5624* DeWalt 616-618* Bosch 1617- 161*…

    $8.49
  21. Rockler Router Plate Insert With 1-1/2" Opening For Standard Plates

    Rockler Router Plate Insert With 1-1/2" Opening For Standard Plates

    The interchangeable insert for standard plates features a 1/2'' opening. The 4'' OD allows this insert to fit into a standard plate with a 3-1/4'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate A* Makita 1100* Milwaukee 5615-5624* DeWalt 616-618* Bosch 1617- 161* Rigid…

    $8.49
  22. SawStop Zero Clearance Lock Down Insert Standard Blade

    SawStop Zero Clearance Lock Down Insert Standard Blade

    The SawStop Zero Clearance Lock Down Insert can be used on all SawStop Table Saws using 10" standard blades. Made from high-quality, ultra strong phenolic core material covered on top and bottom with low-friction, wear-resistant melamine surface. Includes positioning screws that ensure a precise fit…

    $39.00
  23. Rockler Router Plate Insert With 2-1/2" Opening For Large Plates

    Rockler Router Plate Insert With 2-1/2" Opening For Large Plates

    The interchangeable insert for standard bits features a 2-1/2'' opening. The 4-3/8'' OD allows this insert to fit into a standard plate with a 3-11/16'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate C* Porter Cable 7518* Porter Cable 7519* Porter Cable 7538* Porter…

    $8.99
  24. SawStop Zero Clearance Lock Down Insert Dado Blade

    SawStop Zero Clearance Lock Down Insert Dado Blade

    The SawStop Zero Clearance Lock Down Insert can be used on all SawStop Table Saws using 8" dado blades. Made from high-quality, ultra strong phenolic core material covered on top and bottom with low-friction, wear-resistant melamine surface. Includes positioning screws that ensure a precise fit in…

    $39.00
  • Items 1 - 24 of 188
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X