Interlocking Router Bit

  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
  1. Freud® Lock Miter Bits - 1/2'' Shank

    Freud® Lock Miter Bits - 1/2'' Shank

    …the Lock Miter Bit cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable routers. Application: Creating interlocking corner joints.

    From: $95.97
  2. Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    The interlocking fingers of our Lock Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased…

    From: $57.99
  3. Rockler Wedge Tongue and Groove Router Bit - 1-1/2" Dia x 1-3/16" H x 1/2" Shank

    Rockler Wedge Tongue and Groove Router Bit - 1-1/2" Dia x 1-3/16" H x 1/2" Shank

    Stronger than dowels and biscuits, the tongue and groove joints you'll cut with this bit are perfect for edge-joining panels, table tops, or any other glue-up project. The interlocking design increases the available surface area for the glue, resulting in an incredibly strong joint. Since the pieces…

    8 Review(s)
    $49.99
  4. Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    With its multiple interlocking fingers, this bit creates maximum gluing surface area for superior edge joints and splice joints. The fingers have a wedged shape, which when clamped together, helps to close up the joint without any gaps. 3/4" guide bearing.

    1 Review(s)
    $89.99
  5. CNC Shark HD Version 2.0 Routing System

    CNC Shark HD Version 2.0 Routing System

    …and greater accuracy.* USB interface.* Download free project plans from Vectric* Also includes: 3/8" dia. V-groove Bit and two hold-down clamps!* Mount for Router included (Router sold separately).* Z travel up to 7 inches max (2 inches more the regular plus).* X and Y axis have supported linear…

    3 Review(s)
    $3,999.99
  6. Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Rockler Convex Edging Router Bit - 7/8" Dia x 1/2" H x 1/2" Shank

    Our Convex Edging Bit can be used to rout the rounded flanks of homemade Lincoln logs—a children's classic. Simply cut the profiles and then use a straight bit to cut half-lap dados in the logs so they interlock. In addition, the bit can be used to rout a rounded edge on shelves and table…

    1 Review(s)
    $29.99
  7. Rockler Tambour Router Bit - 1-3/16" Dia x 13/16" H x 1/2" Shank

    Rockler Tambour Router Bit - 1-3/16" Dia x 13/16" H x 1/2" Shank

    This tambour router bit set allows you to custom-make wooden tambour doors of almost any size. The finished tambour will look great from both sides and have an interlocking design to keep slats in line and inhibit warping. Works for double or single curve applications. Requires 1/16" coated cable…

    1 Review(s)
    $99.99
  8. Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    Interlock Signmaker's Templates - Letters, Numbers, and Symbols

    …@ and &. Requires the use of a plunge router that accepts standard 1-3/16" template guides. The Interlock Signmaker's Kits require either a 3/8'' (33967) or 5/8'' (30933) guide bushing, as well as a 3/8" (36676) or 5/8" (32443) signmaking router bit, all sold separately. Letters Kits include:…

    51 Review(s)
    From: $22.99
  9. Rockler Edge V-Groove Router Bits - 1/2" Shank

    Rockler Edge V-Groove Router Bits - 1/2" Shank

    …panel stock with these interlocking V-Groove Bits, and you'll never have to worry about misaligned boards again. When it's time to clamp up an edge joint, the parts slide into perfect alignment without any twisting, prying or hammering. The deep channel created by the V-Groove Bit also increases the…

    1 Review(s)
    From: $39.99
  10. Rockler Interlock Signmaker's Templates - State Park Font Kits

    Rockler Interlock Signmaker's Templates - State Park Font Kits

    …Signmaker's Carbide Router Bit (36676, sold separately) and a router with a perforated base.* 3-3/8" Kit (#43820) requires 5/8" Signmaker's Carbide Router Bit (32443, sold separately) and a router with a perforated base.* The uniquely designed sign making router bits (sold separately) are…

    24 Review(s)
    From: $49.99
  11. Rockler Signmaking Carbide Router Bits - 1/4" Shank

    Rockler Signmaking Carbide Router Bits - 1/4" Shank

    …for use with plunge router. 1/4" shank. The 3/8" Signmaking Carbide Router Bit is required for the 2-1/4" Rockler Interlock Signmaker's Templates - State Park Font Kit (48356, sold separately). The 5/8" Signmaking Carbide Router Bit is required for the 3-3/8" Rockler Interlock Signmaker's Templates…

    From: $19.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 11 of 11
  • Page:
    1. 1
Feedback X