Jig Handle

  • Items 1 - 24 of 71
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Drawer Pull JIG IT® Template and Center Punch

    Rockler Drawer Pull JIG IT® Template and Center Punch

    …your investment in drawers and doors -- with the JIG IT® for Drawer Pulls and Knobs.* The marking template offers spacing for boring of 2-1/2 inches, 3 inches, 3-1/2 inches, 3-3/4 inches, 4 inches, and the European 96mm size.* The handle lets you adjust your setback from the edge anywhere…

    22 Review(s)
    $19.99
  2. Cushioned Knob for Shop Jigs

    Cushioned Knob for Shop Jigs

    With its cushioned, textured grip, this extra-long handle is perfect for use with all your shop jigs! At 4-3/8" long, it's especially comfortable for people with larger hands. 5/8" stud length. 5/16-18. Black only.

    $7.39
  3. Rockler T-Track Hold Down

    Rockler T-Track Hold Down

    …your jig and fence making capabilities with these specially designed hold downs. A slotted T-track connector head is molded into the body and allows you to secure any T-track device to your work surface to create fences, straight edges and jigs. Steel threaded shaft and large ergonomic handle make…

    4 Review(s)
    $24.99
  4. Rockler Deluxe Jig Handle

    Rockler Deluxe Jig Handle

    This ergonomically designed handle helps you maintain a firm, comfortable grip on a variety of shop-made jigs. Rugged molded plastic construction with two threaded inserts embedded in the bottom for solid and easily removable attachment to push blocks, router table sleds and more. Technical Details*…

    6 Review(s)
    $4.99
  5. Rockler Taper / Straight Line Jig

    Rockler Taper / Straight Line Jig

    …chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. * Measures 31-5/8" x 7-3/4".*…

    45 Review(s)
    $77.99 $57.99

    SAVE 26%

  6. Rockler Speed-Cope Crown Molding Jig

    Rockler Speed-Cope Crown Molding Jig

    Cut crown and base molding the easy way with this innovative jig. Speed-Cope™ lets you make tricky cope cuts with ease, for perfect molding faster. It adjusts to handle most molding up to 7-1/4" wide, 45° and 90° inside miters, flat miters, and base, chair, and panel moldings. Includes…

    3 Review(s)
    $149.99
  7. Door Making Kit

    Door Making Kit

    …the "equation" Rail Coping Jig* Guide block is easily replaceable to accommodate different profiles and eliminates blowouts* Durable phenolic material base measures 7-7/8" wide x 13-1/2" long* Post handle hold-down clamp allows for quick repositioning* Ergonomic handle for excellent control and…

    $96.28
  8. Blum Slide Jig Gun

    Blum Slide Jig Gun

    You're ensured perfect frameless or face frame installations of Blum epoxy coated drawer slides by simply positioning the jig. Quick, accurate, easy, and absolutely level every time. Technical Details:* Used for positioning cabinet profiles on cabinet sides * Holds cabinet profile in place while…

    7 Review(s)
    $21.99
  9. Dewalt DCK955X Heavy-Duty XRP™ 18V Cordless 9-Tool Combo Kit

    Dewalt DCK955X Heavy-Duty XRP™ 18V Cordless 9-Tool Combo Kit

    …18V 1/4" impact driver* DC330 18V jig saw* DC411 18V cut-off tool* DC550 18V cut-out tool* DW919 flexible floodlight* (2) 18V XRP™ batteries* 1 hour charger* 360° side handle* carbide tipped blade* type 1 guard and wheel* wrench* backing flange* (2) contractor bags* 2-position side handle

    $999.00
  10. EasyCoper for Crown Molding

    EasyCoper for Crown Molding

    …and easily cope crown molding with a power jig saw instead of a coping saw, reducing wrist, hand and arm stress. Coped crown molding is actually one piece of crown fitting over the other piece, instead of the two being mitered at the inside corner.* Handles up to 5-1/2" molding.* Durable plastic.*…

    $47.99
  11. Frame Clamping Kit with Bessey K-Body Revo Parallel Clamps

    Frame Clamping Kit with Bessey K-Body Revo Parallel Clamps

    …paint and grease solvents. A quick-release feature allows the movable jaw to slide up and down the rail by simply angling the comfortable Power-Grip handle. Plus, each clamp includes two slip-on workpiece supports that attach to the rail, providing a stable base and preventing direct contact between…

    $219.99
  12. Festool Trion PS 300 EQ Barrel Grip Jigsaw with New T-Loc Systainer

    Festool Trion PS 300 EQ Barrel Grip Jigsaw with New T-Loc Systainer

    …action has four settings for cuts from fine to aggressive. Electronic speed control is infinitely adjustable with a single dial. Barrel grip handle provides a low center of gravity with a knob for two-handed leverage. Also available in a traditional "D-handle" design (75417) with identical…

    $275.00
  13. Bosch 1617EVSPK Router Combo Package

    Bosch 1617EVSPK Router Combo Package

    This super package deal combines the 1617EVS motor with a plunge base and fixed base to handle a wide range of routing applications!* With 2-1/4 HP, 12 amp motor (8,000-25,000 RPM).* Bits not included.* Package includes router motor, plunge base, fixed base, 1/4" self-releasing collet chuck, 1/2"…

    $229.99
  14. Kreg Deck Jig System

    Kreg Deck Jig System

    …fencing and more! This jig guides you as you drill and drive deck screws at the optimal angle to achieve concealed fastening of deck boards. No more exposed nails or screws! An easy grip handle and 90° alignment tab make setup extremely easy. The onboard drilling jig is preset at the optimal…

    6 Review(s)
    $79.00
  15. Kreg Toolboxx™

    Kreg Toolboxx™

    …collars, and a vast storage space below for jigs,clamps and drill guides, the Kreg Toolboxx is more than capable of housing your entire Kreg Pocket Jig collection in one easily accessible space. What's more, the toolbox comes stocked with a variety pack of over 1000 screws for various pocket hole…

    1 Review(s)
    $79.99
  16. Rockler Clamp-It® Assembly Square

    Rockler Clamp-It® Assembly Square

    …at a perfect 90° angle while fastening.* Bench Jigs: Clamp-It® can be secured to any work surface to create a simple 90° assembly jig.* 5" Clamp-It® Bar Clamp: Clamp features a fixed head with a comfortable ergonomic handle and a moveable tailpiece. Sold Separately Find the right…

    110 Review(s)
    $12.99
  17. JIG IT® Shelving Jig w/Self-Centering Bit

    JIG IT® Shelving Jig w/Self-Centering Bit

    …Re-designed handle includes two storage compartments for self-centering bits! Additional Self-Centering Bit sizes available separately. * Drills holes either 1-7/16" or 2-1/2" from edge. * Insert shelf pin in top or bottom position to extend jig for continuous drilling.* Shelving Jigs

    188 Review(s)
    $36.99
  18. Magswitch T-Handle Magnetic Workholding Square

    Magswitch T-Handle Magnetic Workholding Square

    …allow for the attachment of all types of fixtures, or shop made jigs for quick connect/disconnect on bandsaws, tablesaws, drill presses or other ferrous workstations. NOTE: 50mm Magswitch T-Handle jig shown. The 30mm T-Handle jig available below is slightly smaller. Patented Magswitch technology…

    2 Review(s)
    $62.99
  19. Small T-Handle Clamp

    Small T-Handle Clamp

    Once attached to a bench or fixture, this clamp works great as a quick-action hold down for jigs or as a simple way to secure a work piece. Its holding capacity is approximately 200 pounds. * Bottom of rubber foot adjusts from 1/4" above mounting surface to 3/8" below mounting surface. Total length…

    1 Review(s)
    $16.99
  20. Jet® 17'' Floor Mount Drill Press

    Jet® 17'' Floor Mount Drill Press

    …consistent drilling crosspoint on workpiece * Innovative extra large 14" x 18" work table features twin T-slot grooves for miter gauge or homemade jigs, table has lip designed edge for easy clamping of workpiece and a removable insert * Hinged metal belt and pulley cover provides easy access to the…

    1 Review(s)
    $609.99
  21. Micro Jig GRR-Ripper® Handle Bridge GRHB-010

    Micro Jig GRR-Ripper® Handle Bridge GRHB-010

    Provides four contact points to apply more downward pressure across the entire width of the Micro Jig GRR-Ripper® body for better control. Also includes replaceable push foot. Easily installs to the Micro Jig GRR-Ripper® Basic 3D Push Block System (GR-100) (sold separately)

    1 Review(s)
    $15.99
  22. Dewalt DW331K Heavy-Duty Variable Speed Top-Handle Jig Saw Kit

    Dewalt DW331K Heavy-Duty Variable Speed Top-Handle Jig Saw Kit

    Heavy-Duty Variable Speed Top-Handle Jig Saw Kit* 3 Year Limited Warranty* 6.5 Amp motor delivers the cutting power for the most demanding tasks* Lever-action keyless blade change makes blade replacement fast and easy* All-metal gear case enhances tool durability in a professional shop environment*…

    $149.00
  23. Oneway Wolverine Grinding Jig

    Oneway Wolverine Grinding Jig

    Includes two bases, "V" arm attachment and 3" x 5" platform jig with quick-release ratchet handles. Quickly and easily sharpen your gouges, chisels, scrapers, parting tools, skews and carving tools. * Designed to sharpen traditional bowl gouges and other curved chisels with straight edges such as…

    $104.99
  24. Rockler Rail Coping Jig

    Rockler Rail Coping Jig

    …after a cabinet door jig, look no further! Simply align material flush with the outside edge of the guide block and lock into place with the post handle hold-down clamp and positionable locking knob. Abrasive strip locks the workpiece in place to avoid shimmy or movement. Run the jig along the fence…

    117 Review(s)
    $59.99 $44.99

    SAVE 25%

  • Items 1 - 24 of 71
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X