Jig Plastic

  • Items 1 - 24 of 44
  • Page:
    1. 1
    2. 2
  1. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    …durability and easy cleanup.* ABS plastic backer sled provides ample support, and is also predrilled for a sacrificial face* Easy-grip knobs lock platform into miter slot* Platform measures 10-3/4" x 12-3/8" x 1/2"* Includes all necessary mounting hardware* The jig requires a straight router bit to…

    60 Review(s)
    $79.99 $59.99

    SAVE 25%

  2. UHMW Plastic Jig Stock-3/8 Inch Thick

    UHMW Plastic Jig Stock-3/8 Inch Thick

    …is your best material choice for making jigs and fixtures for your table saw, router table, drill press, etc. UHMW is a linear high density polyethylene that's 10x heavier than regular high-density polyethylene giving you a rock-solid base for your jig or fixture. UHMW has a low coefficient of…

    8 Review(s)
    From: $26.29
  3. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    …Details* Cuts box joints from 1/4" to 13/16" wide* Micro-adjust feature allows adjustments of less than 1/64"* Secure-lock settings keep the jig in place while in use* Plastic backing strip helps eliminate chip-out Best Used With: Freud Box Joint Cutter Set (27371) 4-Piece Straight Bit Set (60579)

    16 Review(s)
    $119.99
  4. Rockler Bench Dog® Bullnose Trim Gauge

    Rockler Bench Dog® Bullnose Trim Gauge

    Simplify trim work on 3/4" rounded drywall corners with this clever jig. It helps layout perfect lines for tight-fitting three-piece corners. Plus, if you're working alone you can nail it in place to anchor your tape measure. Great for installing both crown and base molding. Technical Details:*…

    6 Review(s)
    $10.49
  5. EasyCoper for Crown Molding

    EasyCoper for Crown Molding

    …molding with a power jig saw instead of a coping saw, reducing wrist, hand and arm stress. Coped crown molding is actually one piece of crown fitting over the other piece, instead of the two being mitered at the inside corner.* Handles up to 5-1/2" molding.* Durable plastic.* Sold in pairs. Left and…

    $47.99
  6. UHMW Plastic Jig Stock - 3/4'' Thick

    UHMW Plastic Jig Stock - 3/4'' Thick

    …making it glide over your work surface with little resistance. Plus, this rugged polymer will last for years, as it is highly resistant to abrasions, chemical-resistant, and maintains its high-impact strength even at low temperatures. 4''W X 24'' L X 3/4'' Thick UHMW Plastic Jig Stock.

    8 Review(s)
    $30.49
  7. Rockler Incra Universal Precision Positioning Jig

    Rockler Incra Universal Precision Positioning Jig

    …is made of solid aluminum with 15-ply wood runners. Fence and stop block are made of MDF with durable plastic laminate covering. Pre-drilled for quick and easy attachment to Incra jig.* Router bits sold separately. The #91023 1/2" diameter dovetail bit and the #90462 3/8" straight bit provide…

    2 Review(s)
    $69.99
  8. Kreg Drawer Mounting Brackets

    Kreg Drawer Mounting Brackets

    …box into the drawer opening so it balances on the brackets and pull the slide to the front of the drawer box. Drive screws and you're done!* Works with Kreg Universal Drawer Slide Mounting Jig (#38444).* Includes left and right brackets.* Bracket measures 10" long x 4" high x 1-1/2" wide.* Plastic.

    1 Review(s)
    $9.99
  9. Rockler Deluxe Jig Handle

    Rockler Deluxe Jig Handle

    …of shop-made jigs. Rugged molded plastic construction with two threaded inserts embedded in the bottom for solid and easily removable attachment to push blocks, router table sleds and more. Technical Details* Comfortable, ergonomic design is perfect for push blocks and other jigs.* Base has two…

    6 Review(s)
    $4.99
  10. Micro Jig ZeroPlay® Guide Bar

    Micro Jig ZeroPlay® Guide Bar

    Each Micro Jig ZeroPlay Guide Bar is composed of two interlocking plastic bars that adjust laterally to theexact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. The ZeroPlay Guide Bar is a "One-Touch…

    $15.99
  11. Kreg Deck Jig Spacer Rings

    Kreg Deck Jig Spacer Rings

    …your deck clean and dry, reducing twisting and bowing, by maintaining proper air flow* Choose 1/4" or 5/16"* Expanded 5/16" ring compensate for expanding deck boards* Designed to work with the Kreg Deck Jig™* Made of durable high-impact plastic* Includes instructions* Pack of 12* Made in USA

    $9.99
  12. Micro Jig ZeroPlay™ Guide Bar System

    Micro Jig ZeroPlay™ Guide Bar System

    Each guide bar is composed of two interlocking plastic bars that adjust laterally to the exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly…

    4 Review(s)
    $34.99
  13. Grr-Ripper® Micro Jig Replacement 1/4'' Leg

    Grr-Ripper® Micro Jig Replacement 1/4'' Leg

    …miss the tunnel of your Grr-Ripper® push block and end up nicking the leg. Luckily, thanks to the push block, it's a lot cheaper to replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripper replacement legs are available: the Center Leg, 1/4" Leg, and 1/2" Leg. All three…

    $14.99
  14. GRR-Ripper® Micro Jig Replacement 1/2'' Leg

    GRR-Ripper® Micro Jig Replacement 1/2'' Leg

    …miss the tunnel of your Grr-Ripper® push block and end up nicking the leg. Luckily, thanks to the push block, it's a lot cheaper to replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripper replacement legs are available: the Center Leg, 1/4" Leg, and 1/2" Leg. All three…

    $14.99
  15. Grr-Ripper® Micro Jig Replacement Center Leg

    Grr-Ripper® Micro Jig Replacement Center Leg

    …miss the tunnel of your Grr-Ripper® push block and end up nicking the leg. Luckily, thanks to the push block, it's a lot cheaper to replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripper replacement legs are available: the Center Leg, 1/4" Leg, and 1/2" Leg. All three…

    $15.99
  16. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    …buck with a saw that does it all! This multi-purpose saw makes straight cuts or curved cuts on everything from wood and metal to ceramic tile, plastic, PVC and more.* Use it in your shop or take it to your job site - weighs just over 17 lbs.* Uses standard T-shank jigsaw blades* Change blades in…

    21 Review(s)
    $178.99
  17. Rockler Doweling Jigs Case

    Rockler Doweling Jigs Case

    …Doweling Jigs features pre-molded spots for 1/4", 3/8" and 1/2" jigs, 1/4", 3/8" and 1/2" drill bits, and 1/4", 3/8" and 1/2" stopcollars.* Lightweight, durable plastic construction. Best Used With:* Rockler 1/4" Dowel Drilling Jig* Rockler 3/8" Dowel Drilling Jig* Rockler 1/2" Dowel Drilling Jig

    $8.49
  18. Ball Knob for Shop Jigs

    Ball Knob for Shop Jigs

    Ball knob has an easy-grip round profile. The 2" diameter fits securely in your palm. Made from rugged plastic with 5/16" -18 threaded brass insert.

    $3.19
  19. 18'' Measuring Kit for Jigs

    18'' Measuring Kit for Jigs

    Take your jigs and fixtures to new levels of accuracy! With this easy to use kit, you'll be able to set your jigs up for convenient repeatability and easier, more precise stop-block operation.* Includes 3 left-to-right and 3 right-to-left 18" tapes, as well as 2 plastic cursors for stop blocks.*…

    5 Review(s)
    $17.99
  20. Fence, Stop Block & Right angle Fixture

    Fence, Stop Block & Right angle Fixture

    Right angle fixture is made of solid aluminum with 15-ply wood runners. Fence and stop block are made of MDF with durable plastic laminate covering. Pre-drilled for quick and easy attachment to Incra jig.

    $69.99
  21. T-Track Tape Measures

    T-Track Tape Measures

    Need a measuring reference on your T-Track device? These 36'' plastic t-track tape measure inserts fit any universal T-Track (up to 48" in length) to give you accurate measurements to 1/16" along your fence for on the fly adjustments and more. Use for setting up fence measurement from the edge of…

    4 Review(s)
    From: $10.99
  22. 3/4" Round Knob, insert, 10-24 tpi

    3/4" Round Knob, insert, 10-24 tpi

    Securing shop jigs and fixtures is much easier with these handy knobs. Textured knob edge provides excellent grip to hand tighten or loosen your setups. Choose from knobs which include a threaded insert or a bolt according to your needs. Technical Details* 3/4" knob diameter* 34186 includes a 10-24…

    $1.99
  23. 3/4" Round Knob, 1/2" long bolt, 10-24 tpi

    3/4" Round Knob, 1/2" long bolt, 10-24 tpi

    Securing shop jigs and fixtures is much easier with these handy knobs. Textured knob edge provides excellent grip to hand tighten or loosen your setups. Choose from knobs which include a threaded insert or a bolt according to your needs. Technical Details* 3/4" knob diameter* 34186 includes a 10-24…

    $1.89
  24. 2" T-Knob

    2" T-Knob

    T-style knobs are the perfect choice for that jig or fixture that requires a little extra torque, or when you need a nice easy target to flick when spinning the knobs on and off. These T-knobs from Rockler have a pleasant textured surface and a threaded insert made of brass. The hole runs all the…

    32 Review(s)
    From: $1.89
  • Items 1 - 24 of 44
  • Page:
    1. 1
    2. 2
Feedback X