Jig Saw Attachments

  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
  1. Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    The Ultimate Thin Stock Jig/Rip Guide Attachment is for use with the Magswitch Workholding System. No other tool like it in the industry! Three tools in one! Mounts to the Universal Base and MagJigs (each sold separately). Features stepped side for most common sizes of 1/8", 1/4", and 3/8". The…

    $21.99
  2. Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    Rockwell® Blade Runner™ Jig Saw, Multi-Purpose Precision Cutter

    …blades in under 3 seconds* Attaches to any shop vac for quick cleanup Save time and money with this versatile saw. Change blades in less than three seconds to cut wood, metal, tile and more. Includes five standard T-shank jigsaw blades.Features and benefits:* Portable saw weighs just over 17 lbs.…

    21 Review(s)
    $178.99
  3. AccuRight Circle Jig for Bandsaws

    AccuRight Circle Jig for Bandsaws

    …every time! Attach this jig to almost any bandsaw to create a system for repeatable accurate circle cuts. Circles up to 48" in diameter are possible when you provide proper external support. Easy-to-read radius measurements ensure precise circle size. Use the included universal attachment bracket to…

    9 Review(s)
    $69.95
  4. All-In-One Clamp Guide Package w/Free Squaring Attachment

    All-In-One Clamp Guide Package w/Free Squaring Attachment

    …ideal straight-edge saw guides, router guides, measuring tools, marking aids and, of course, clamps. Expertly engineered, they are easy to attach and to adjust - just close the four-position locking lever, and you're ready to go. Squaring Attachment: * Squaring attachment consists of two extra-wide…

    2 Review(s)
    $179.99 $89.99

    SAVE 50%

  5. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    …Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece…

    16 Review(s)
    $119.99
  6. Micro Jig GRR-Ripper® 1/8'' Side Leg GRP-11G

    Micro Jig GRR-Ripper® 1/8'' Side Leg GRP-11G

    …Precision, safety, and confidence with the GRR-Ripper. 1/8" side leg attachment easily installs to the Micro Jig GRR-Ripper® Basic 3D Push Block System (GR-100) (sold separately) with included hardware, creating a 3/8" tunnel to enable table saw rips as thin as 1/8". Tunnel height is 1/2".

    1 Review(s)
    $15.49
  7. Rockler Incra Universal Precision Positioning Jig

    Rockler Incra Universal Precision Positioning Jig

    …and repeatability on virtually any power tool in your shop, including router table, table saw, drill press and band saw.* Includes box joint template and dovetail & corner post template. Simply set the jig to the color-coded reference marks and make your cuts. No math, no measurements, and no…

    2 Review(s)
    $69.99
  8. Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    …across the entire width of the Micro Jig GRR-Ripper's body for better control. Also includes replaceable push foot.* Micro Jig GRR-Ripper instructional DVD covers over 30 applications of the Micro Jig GRR-Ripper System on four different machines: table saw, router, jointer and band saw. 120 minutes.

    25 Review(s)
    $59.99
  9. Rockler Miter Slot Hardware Kit

    Rockler Miter Slot Hardware Kit

    Make your own jigs and hold-downs!* Excellent for attaching featherboards, hold-downs and special jigs to your table saw, router table, disc sander or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot. Hardware kit allows you to make your own jigs and hold-downs. * 4-3/4" long…

    27 Review(s)
    $7.99
  10. Festool Carvex Accessory Kit

    Festool Carvex Accessory Kit

    …plates attach to jigsaw without tools.* Organized in Festool SYS 2 T-LOC Systainer.* Works with all Festool Carvex Jigsaw models. Dimpled Base Insert (497298)* Rounded convex dimples have very little friction, and won't snag on unevensurfaces.* Prevents saw dust from mounding at the front of the saw

    $200.00
  11. Circle Cutter for Festool PS300 and PSB300 Jigsaws (490118)

    Circle Cutter for Festool PS300 and PSB300 Jigsaws (490118)

    Attach the accessory Circle Cutter to your Festool jigsaw for precise circles ranging in diameter from 4-23/32'' to 28-11/32'' (120 to 720 mm). Steel circle cutter attaches to base plate of jigsaw with thumb screws and comes with a centering mandrel. For use with both the Festool PS 300 and PSB…

    $35.00
  12. Rockler Aluminum Miter Bar

    Rockler Aluminum Miter Bar

    …3/4" x 3/8" miter slot. Available individually in 18", 24" and 36" lengths.* Great for shop-made crosscut jigs, cutoff tables, taper jigs and more.* Aluminum won't warp, swell or shrink like wooden runners — jigs fit perfectly time after time.* 1/4-20 threaded holes for easy attachment.

    12 Review(s)
    From: $19.99
  13. Magswitch T-Handle Magnetic Workholding Square

    Magswitch T-Handle Magnetic Workholding Square

    …Guide shown Magsquares allow for the attachment of all types of fixtures, or shop made jigs for quick connect/disconnect on bandsaws, tablesaws, drill presses or other ferrous workstations. NOTE: 50mm Magswitch T-Handle jig shown. The 30mm T-Handle jig available below is slightly smaller. Patented…

    2 Review(s)
    $62.99
  14. Magswitch® Workholding System Starter Kit

    Magswitch® Workholding System Starter Kit

    …Reversible Featherboard. The Starter Kit features a reversible featherboard attachment that mounts to the base and can be used on either side of the blade. The two Mag-Jig 150s are removable and can also be used in your own jigs and fixtures.* Holds stock for controlled ripping, routing, shaping,…

    1 Review(s)
    $76.49
  15. Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    Bench Dog® Single Feather-Loc®, Multi-Purpose Featherboard

    Feather-Loc® protects your hands and helps prevent kickback, binding, and bent blades. Use it on the table saw to keep long stock tight against the rip fence, or attach it to your fence to prevent workpieces from lifting during a cut. It features integral fittings for T-slots and includes a…

    14 Review(s)
    $16.79
  16. Kreg™ Precision Measuring Systems Kit

    Kreg™ Precision Measuring Systems Kit

    Complete measuring system for your miter saw, radial arm saw or drill press is faster and more accurate than putting a pencil mark on every board!* Just set precision lens cursor to desired length and place board against stop - you're ready to cut to length. Technical Details:* Kit includes four 2'…

    $124.00
  17. 18" Universal Track for Magswitch Workholding System

    18" Universal Track for Magswitch Workholding System

    The Universal Track Attachment is for use with the Magswitch Workholding System. Mounts to the Universal Base and MagJigs (each sold separately). The Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own jigs, fixtures, stops, fences, zero-clearance fences and…

    $32.49
  18. 36" Universal Track for Magswitch Workholding System

    36" Universal Track for Magswitch Workholding System

    The Universal Track Attachment is for use with the Magswitch Workholding System. Mounts to the Universal Base and MagJigs (each sold separately). The Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own jigs, fixtures, stops, fences, zero-clearance fences and…

    $65.99
  19. Bench Dog® Crown-Cut

    Bench Dog® Crown-Cut

    …and easiest way to cut crown and cove molding.* Fits all 10" and larger miter saws, regular or sliding.* Exclusive fence risers adjust to fit crown and cove molding up to 6" wide.* Integral setup guide prevents costly miscuts!* Completely portable. Does NOT need to be attached to your miter saw.

    9 Review(s)
    $27.99
  20. Bench Dog® Tandem Feather-Loc®

    Bench Dog® Tandem Feather-Loc®

    …easy-to-use accessory! Use this tough polymer attachment on 1/4" T-tracks or standard miter slots to secure tall stock for safe, clean cutting. Great for edge routing tall panels, resawing stock on the band saw, or ensuring chatter-free cuts on the table saw. Technical Details:* Ergonomic T-knobs…

    2 Review(s)
    $37.79
  21. Bench Cookie Plus® T-Track Kit

    Bench Cookie Plus® T-Track Kit

    …bushings measure 2" long. 17-Piece Universal T-Track Kit* Outfit your workbenches, jigs, or machine tables with the ultimate accessory track!* Universal T-Track boasts a unique stacked-slot design that allows you to attach any accessory with 1/4" T-bolts, 5/16" T-bolts, or 1/4" Hex-bolts.* 17-Piece…

    $54.97
  22. The Best of Woodworker's Journal, 3 Book Set

    The Best of Woodworker's Journal, 3 Book Set

    …Sander* Drum Sanding Station* Shop-Built Disc Sander* Sanding Disc Caddy* Quick and Easy Band Saw Fence* Scroll Saw Blade Caddy* Sliding, Circle-Cutting Band Saw Jig.* Magnetic Drill Press Vise* Adjustable Dado Jig* Veneer Jointing Jig* Customized Portable Lathe Station* Lathe Attachment for Sanding

    $59.85
  23. Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …or in pairs for sacrificial fences, half-fences, resaw fences, and a variety of other fixtures* Works great for table saws, band saws, cutoff saws, router fences and more* Attach the Clamp-It® to a work surface using the Universal Fence Clamps, and it becomes a right angle fixture for bench…

    14 Review(s)
    $29.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 23 of 23
  • Page:
    1. 1
Feedback X