Jig Saw Guide

  • Items 1 - 24 of 38
  • Page:
    1. 1
    2. 2
  1. Bench Dog® Crown-Cut

    Bench Dog® Crown-Cut

    …and easiest way to cut crown and cove molding.* Fits all 10" and larger miter saws, regular or sliding.* Exclusive fence risers adjust to fit crown and cove molding up to 6" wide.* Integral setup guide prevents costly miscuts!* Completely portable. Does NOT need to be attached to your miter saw.

    9 Review(s)
    $27.99
  2. Festool Jigsaw Parallel Guide

    Festool Jigsaw Parallel Guide

    Attach the Parallel Guide to your Festool PS 300 or PSB 300 to make cuts parallel to material edge, up to a maximum width of 7 7/8 inches (200 mm) from the edge. Steel parallel guide attaches quickly and without the need for tools to the base plate of the jigsaw with thumb screws.

    $35.00
  3. Festool Jigsaw Guide Stop

    Festool Jigsaw Guide Stop

    Attach your Festool jigsaw to any length Festool guide rail for straight, repeatable cuts. The PS300 and PSB300 jigsaws simply clip into this base for smooth and straight cutting with any Festool guide rail.

    $20.00
  4. All in One Clamp Guide Package, While Supplies Last!

    All in One Clamp Guide Package, While Supplies Last!

    …long handle and 1-3/4" wide extrusion.* Built-in T-track on top of the guide allows you to use any of our versatile accessories or shop-made jigs.* Create your own shooting board for routing or cutting with the circular saw.* This is a "C Series" or Contractor series clamp with a lower profile. "A…

    37 Review(s)
    $159.99
  5. All-In-One Clamp Guide Package w/Free Squaring Attachment

    All-In-One Clamp Guide Package w/Free Squaring Attachment

    …for bearing-guided routing applications.* Built-in T-track on top of the guide allows you to use any of our versatile accessories or shop-made jigs.* Create your own shooting board for routing or cutting with the circular saw.* This is a "C Series" or Contractor series clamp with a lower profile. "A…

    2 Review(s)
    $179.99 $89.99

    SAVE 50%

  6. Festool Guide Rails

    Festool Guide Rails

    …cuts! With the correct Festool Guide Stop, they can work with Festool routers, plunge cut saws, jig saws and more. Technical Details:* Hard-anodized surface* Soft, non-slip coating* Hard rubber splinter guard* Mounting slot for: FSW angle unit, Connector for Guide Rails (482107), FSZ clamps, FS-AW…

    From: $80.00
  7. Thin Rip Tablesaw Jig

    Thin Rip Tablesaw Jig

    …narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig into the miter track and locks your setting at the same time. Ball bearing guide keeps your workpiece…

    104 Review(s)
    $26.99
  8. Micro Jig Splitter™ SteelPRO System, 1/8'' Kerf

    Micro Jig Splitter™ SteelPRO System, 1/8'' Kerf

    …reinforced with a solid stainless steel core. Toughest Micro Jig splitter ever, utilizes the same patented technology of the original Micro Jig Splitters. Furthermore, the SteelPRO employs another groundbreaking innovation for table saw safety and efficacy: The Dual Splitter. This allows the…

    $39.99
  9. Bench Dog® Pro-Cut™ Portable Saw Guide

    Bench Dog® Pro-Cut™ Portable Saw Guide

    Get perfect 90° crosscuts with your circular saw every time!* Built-in guides square Pro-Cut to the workpiece.* Two rubber strips prevent side-to-side movement. Instantly aligns your saw to the cut line, plus reduces dangerous kickbacks, binding and bent blades.* Ideal for cutting lumber,…

    $15.99
  10. Micro Jig ZeroPlay™ Guide Bar System

    Micro Jig ZeroPlay™ Guide Bar System

    …your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly hardware as well as plans to build a table saw crosscutting jig with off cut deflector, jointing fence alignment jig for the…

    4 Review(s)
    $34.99
  11. Festool Trion PSB 300 EQ D-Handle Jigsaw with New T-Loc Systainer

    Festool Trion PSB 300 EQ D-Handle Jigsaw with New T-Loc Systainer

    …valid at Rockler retail stores or independent partner resellers. The PSB 300 is a jigsaw with the blade guidance system of a bandsaw. Two side guides and a rear thrust bearing keep the blade tracking straight and perpendicular for unprecedented precision. You'll be amazed at the cut quality.…

    2 Review(s)
    $275.00
  12. Micro Jig ZeroPlay® Guide Bar

    Micro Jig ZeroPlay® Guide Bar

    Each Micro Jig ZeroPlay Guide Bar is composed of two interlocking plastic bars that adjust laterally to theexact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. The ZeroPlay Guide Bar is a "One-Touch…

    $15.99
  13. Connector for Festool Guide Rails

    Connector for Festool Guide Rails

    Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connectors. Connectors fit in integrated guide rail T-slots for secure cutting. Includes 1 connector (2 are needed). Can also be used to connect the Festool MFS templates.

    2 Review(s)
    $17.00
  14. Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment

    …sloped for odd sizes up to 3/4". The Ultimate Thin Stock Jig/Rip Guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock. Ideal for thin stock hold down or in/out feed on a table saw. Enhances safety by keeping your fingers away from the blade…

    $21.99
  15. Bench Dog® Panel-Loc™ Panel Cutting Guide

    Bench Dog® Panel-Loc™ Panel Cutting Guide

    The ultimate panel-cutting accessory! Developed by acclaimed woodworker Lonnie Bird, Panel-Loc is a combination hand guard and panel hold-down that provides safer and better cuts when routing raised panels. Orange push blocks not included. Firmly holds panel down and eliminates unwanted lifting; it…

    $52.99
  16. Festool Guide Rail for LR 32 Hole Drilling System

    Festool Guide Rail for LR 32 Hole Drilling System

    …hinges. As part of an integrated system, it also can be used with Festool plunge saws and jigsaws for expanded capability. Features:* Hard-anodized surface.* Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action.* Integrated splinterguard aligns perfectly…

    $315.00
  17. The New Complete Guide to the Bandsaw Book

    The New Complete Guide to the Bandsaw Book

    …detailed drawings and expert instruction throughout. 188 pages. Contents:* Band saw Basics.* Shopping for a Saw.* Band Saw Blades.* Adjusting the Band Saw.* Sawing Straight Cuts.* Sawing Curved Cuts.* Patterns and Templates.* Jigs and Fixtures.* Sawing Joints.* Glossary.* Resources.* Index.

    1 Review(s)
    $19.95
  18. Micro Jig Microdial Tapering Jig

    Micro Jig Microdial Tapering Jig

    …index holes, and set the jig by lining up your layout marks. The tapering jig is designed to interface seamlessly with the optional Grr-Ripper GR-200 (30737, sold separately) for the ultimate in safety and versatility. Technical Details:* Ideal for use with your table saw, but can also be used with…

    $139.99
  19. Micro Jig ZeroPlay® Stop ZP9-S1

    Micro Jig ZeroPlay® Stop ZP9-S1

    More than just a miter stop! Small and versatile, this stop can also lock a jig in place or serve as a lock to secure a hold-down clamp (not included) in the miter slot. Fits standard 3/4" x 3/8" T-Style miter slots.

    $7.39
  20. Micro Jig MJ Splitter™ for Table Saw

    Micro Jig MJ Splitter™ for Table Saw

    Improve Table Saw Safety! The affordable Micro Jig MJ Splitter™ system is simple to use, exact, and extremely effective. Produces virtually burn-free cuts! Technical Details:* Low-profile splitter also serves as a mini featherboard for the keeper piece behind the saw blade.* Designed to be…

    14 Review(s)
    From: $30.99
  21. Micro Jig Splitter™ SteelPRO System, Thin Kerf

    Micro Jig Splitter™ SteelPRO System, Thin Kerf

    Micro Jig Splitter™ SteelPro is constructed from a 100% polycarbonate shell and reinforced with a solid stainless steel core. The SteelPRO employs another groundbreaking innovation for table saw safety and efficacy: The Dual Splitter. This allows the splitters to control the pressure on the…

    3 Review(s)
    $39.99
  22. GRR-Ripper® Micro Jig Replacement 1/2'' Leg

    GRR-Ripper® Micro Jig Replacement 1/2'' Leg

    Every once in a blue moon you miss the tunnel of your Grr-Ripper® push block and end up nicking the leg. Luckily, thanks to the push block, it's a lot cheaper to replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripper replacement legs are available: the Center Leg,…

    $14.99
  23. Grr-Ripper® Micro Jig Replacement Center Leg

    Grr-Ripper® Micro Jig Replacement Center Leg

    Every once in a blue moon you miss the tunnel of your Grr-Ripper® push block and end up nicking the leg. Luckily, thanks to the push block, it's a lot cheaper to replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripper replacement legs are available: the Center Leg,…

    $15.99
  24. Grr-Ripper® Micro Jig Replacement 1/4'' Leg

    Grr-Ripper® Micro Jig Replacement 1/4'' Leg

    Every once in a blue moon you miss the tunnel of your Grr-Ripper® push block and end up nicking the leg. Luckily, thanks to the push block, it's a lot cheaper to replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripper replacement legs are available: the Center Leg,…

    $14.99
  • Items 1 - 24 of 38
  • Page:
    1. 1
    2. 2
Feedback X