• Items 1 - 24 of 342
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    Rockler Finger Joint Router Bit - 1-3/8" Dia x 1-1/2" H x 1/2" Shank

    With its multiple interlocking fingers, this bit creates maximum gluing surface area for superior edge joints and splice joints. The fingers have a wedged shape, which when clamped together, helps to close up the joint without any gaps. 3/4" guide bearing.

    1 Review(s)
  2. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    The Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece…

    16 Review(s)
  3. Kreg R3 Pocket Hole System

    Kreg R3 Pocket Hole System

    …together more quickly than ever before. Simply drill pocket holes and drive self-tapping screws. * Nine position settings let you create strong wood joints in materials from 1/2" to 1-1/2" thick in 1/8" increments.* Hardened steel drill guides with lifetime warranty.* With wood chip relief holes and…

    32 Review(s)
  4. Micro Jig Microdial Tapering Jig

    Micro Jig Microdial Tapering Jig

    …Details:* Ideal for use with your table saw, but can also be used with a router table for routing tapered profiles such as flutes and bevels.* Jointing function lets you use the tapering jig to put a perfectly straight edge on rough-sawn boards.* Patent pending Microdial Colormatch System lets you…

  5. Tite Joint Fastener

    Tite Joint Fastener

    Fasteners apply controlled pressure between joint members. These fasteners prevent joint members from twisting and buckling. Great for joining countertops. 4-1/16" long bolt allows a center to center range of 2" to 3-1/2". Requires 7/8" diameter holes 5/8" deep.

    From: $4.29
  6. Rockler Complete Dovetail Jig

    Rockler Complete Dovetail Jig

    …dovetailing accuracy. And our new preset template guide allows for quick initial setup for 1/2" to 3/4" thick stock. Jig will cut half-blind dovetailed joints from 1/2" to 1-1/8" thick and full through dovetails from 3/8" to 3/4" thick. Accommodates stock up to 11" wide. * Requires router with 1/2"…

    131 Review(s)
  7. Rockler Beadlock® Pro Joinery Kit

    Rockler Beadlock® Pro Joinery Kit

    Get incredibly strong, totally concealed joints with just your hand drill and the Beadlock Pro Kit. Beadlock® Pro does everything Beadlock® Basic does, but adds greater capacity and adjustability, plus the ability to create traditional smooth-sided mortises. Just pop the included paring…

    32 Review(s)
  8. E-Z jointer Clamp Kit

    E-Z jointer Clamp Kit

    Straighten any length of lumber using your table saw. It's never been easier or more economical to make straight and even edges on any size stock. No need buy a jointer with the Joint'R Clamp Kit, all you need is your table saw. Simply attach to a straight board that has been rabbeted out at the…

    7 Review(s)
  9. Router Bit Set-Up Jigs-Rail-and-Style Bits

    Router Bit Set-Up Jigs-Rail-and-Style Bits

    …the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They are made of durable HDPE and measure 2" x 3-7/8" x 3/4". (Jigs designed for rail-and-stile…

  10. Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/4" Shank

    Rockler Tongue and Groove Router Bit - 3/8" Dia x 1/4" H x 1/4" Shank

    …you to machine joints for curved parts.* Designed to cut a tongue and groove joint for 3/4" stock. * Depth of groove is 3/8".* Ball bearing guide lets you follow the material. * Includes one arbor, two 22mm bearings, and two cutters.* Shim pack lets you adjust the fit for the strongest glue joint.

    10 Review(s)
  11. Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Rockler Drawer Lock Router Bit - 1" Dia x 1/2" H x 1/2" Shank

    Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer boxes where the finished front is…

    18 Review(s)
  12. Woodworker's Guide to Joinery, Book

    Woodworker's Guide to Joinery, Book

    …make your joinery stand the test of time. 192 pages. Table of Contents:* Introduction with Lyle Kruger and Pat Warner* Chapter 1: Joinery Basics* Chapter 2: Butt Joints* Chapter 3: Miter Joints* Chapter 4: Lap and Groove Joints* Chapter 5: Mortise and Tenon Joints* Chapter 6: Dovetail and Box Joints

  13. 1/2" Tenon-Lok™  Dovetail Drill Bit

    1/2" Tenon-Lok™ Dovetail Drill Bit

    …Fit tenon into guide and tap with mallet just enough to start the ring into the end of the tenon. Now you can proceed with installing the tenon into the mortise. Either clamp the joint together or use a mallet, causing the metal ring to seat itself into the tenon, expanding it for a permanent joint.

    2 Review(s)
  14. Leigh Y-Axis Mortise Guides

    Leigh Y-Axis Mortise Guides

    Use your Leigh FMT to flip your mortises on their sides! Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90° to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x…

  15. Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    Rockler Bead & Cove Canoe Building Router Bits - 1/2" Shank

    …barrels and curved doors! Exclusive sizes sold only at Rocker! Canoe makers use the smaller versions of these bits to make the long, seamless joints in the curving hulls of their canoes. We also sell larger versions for stock up to 1/2" thick (1/4" radius), which is ideal for building coopered…

    4 Review(s)
    From: $49.99
  16. Kreg Blue-Kote™ Weather Resistant Screws-Optional Sizes

    Kreg Blue-Kote™ Weather Resistant Screws-Optional Sizes

    …three chemically-combined anti-corrosion layers that give them up to 400% more weather resistance than zinc-plated screws.* Self-tapping screw tips make for easy driving* Case hardened steel won't bend or break* Deep-seated #2 square drive heads eliminate "cam out," ensuring a tight, solid joint

    2 Review(s)
    From: $4.59
  17. Butterfly Key Inlay Template Set

    Butterfly Key Inlay Template Set

    This time-honored inlay design (also known as Bow-Tie or Dutchman) works great for everything from decoration to joint reinforcement! Requires the Rockler Inlay System (#25229 Sold Separately). This four-piece set contains 4" x 6" clear acrylic inserts with patterns for seven different sized inlays.…

    1 Review(s)
  18. Workbench Leg Kit

    Workbench Leg Kit

    …together a power tool stand as small as 2'x2'. It's the perfect solution for custom sizes, and incredibly easy to modify. No miters, no tricky cuts or joints - all you need is a drill and a saw! * Assembled workbench measures roughly 36" tall.* Finished work surface can be up to 4'x8'.* Rugged resin…

    6 Review(s)
  19. Leigh ACMTC Accessory Kit

    Leigh ACMTC Accessory Kit

    …bits in all, ranging from 1/16" to 1/2" in diameter-as well as sixteen specialty guides for routing a huge variety of perfect mortise and tenon joints. This kit includes three sets of FMT guides, each with its own unique capability.* The 1/4" guide set contains eight guides and can machine mortises…

    1 Review(s)
  20. Beadlock® Tenon Stock

    Beadlock® Tenon Stock

    …Beadlock® joinery system allows you to create joints with mortise and tenon strength without the need for large, expensive machinery. The flutes on the stock increase the amount of precious glue surface and also prevent the joint from racking. And now you can save time by buying Beadlock®…

    6 Review(s)
    From: $7.99
  21. Rockler Incra Universal Precision Positioning Jig

    Rockler Incra Universal Precision Positioning Jig

    The Original Incra Jig:* Even the novice woodworker can produce beautiful joinery on the router table.* Easily create joints such as dovetails, box and double dovetails with precision.* Comes with FREE 1-hour instructional DVD and joint-making templates ($19.99 Value)* Fence, stop block and right…

    2 Review(s)
  22. Bradley Casing Molding-Cherry

    Bradley Casing Molding-Cherry

    Frame your doorways with a beautiful, traditional Cherry casing. Mostly flat with a dimpled edge, corner joints will match up for a uniform look. High quality kiln-dried hardwood will color match with Bradley Crown Molding, Chair Rail and Base Molding (all sold separately) to preserve a consistent…

    From: $21.99
  23. 1000 Piece Biscuit Mix

    1000 Piece Biscuit Mix

    …most common sizes of biscuits: #20, #10 and #0. Use these compressed wood fiber biscuits along with a plate joiner to make tight, easy to align joints in panel glue-ups and a variety of woodworking projects. Technical Details* Kit contains 500 #20, 250 #10, and 250 #0 biscuits* #20 biscuits measure…

    2 Review(s)
  24. Freud Box Joint Cutter Set

    Freud Box Joint Cutter Set

    …box joints, on a table saw without using a dado set or saw blade. The SBOX8 Box Joint Cutter Set makes box joint construction easy, producing strong, accurate joints without shims or awkward adjustments. This patent pending innovation enables users to produce perfectly square, precise box joints

    1 Review(s)
  • Items 1 - 24 of 342
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X