Kerf Blade

  • Items 1 - 24 of 65
  • Page:
    1. 1
    2. 2
    3. 3
  1. Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    Freud® LU79R Thin Kerf Ultimate Plywood & Melamine Saw Blades

    …these thin kerf blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade! The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding…

    5 Review(s)
    From: $52.47
  2. Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    Freud® LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

    The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut…

    24 Review(s)
    From: $49.97
  3. Oshlun 6'' Stack Dado Set

    Oshlun 6'' Stack Dado Set

    Make perfect flat-bottom cuts! Affordable saw blade and dado set features full-size chippers for easier setup and less chance of wobble or vibration. With C-4 industrial quality carbide tips. Ideal for all types of dimensioned lumber, plywood, soft wood, hard wood, artificial and processed woods,…

    21 Review(s)
    $83.99
  4. Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    Freud® LU74R Industrial Thin Kerf Ultimate Cut-Off Saw Blades

    This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…

    3 Review(s)
    From: $57.47
  5. Thin Kerf Parting Tool, 1/16''

    Thin Kerf Parting Tool, 1/16''

    …a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4" blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines to turnings. For a solid interface with the handle, the blade is seated and riveted a full…

    2 Review(s)
    $35.99
  6. 10'' Freud Premier Fusion Thin Kerf Saw Blade

    10'' Freud Premier Fusion Thin Kerf Saw Blade

    …cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. The Perma-SHIELD® coating covers the blade plate…

    7 Review(s)
    $79.97
  7. Olson® 5-inch Pin End Thin Kerf Scroll Saw Blades, 6-Pack

    Olson® 5-inch Pin End Thin Kerf Scroll Saw Blades, 6-Pack

    Thin kerf scroll saw blades for extra-fine cuts in hard or soft wood, as well asplastic. Capable of cutting materials from 3/32-inch to 1/2-inch thick, and of cuttingradiuses as small as 1/8-inch. Fine spring steel. Sold in packs of six. Technical Details:* Excellent for hardwoods, softwoods,…

    $5.79
  8. Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    Freud® LU87R Industrial Thin Kerf Rip Saw Blades

    This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to…

    9 Review(s)
    From: $32.97
  9. Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    Freud® LU86R Industrial Thin Kerf General Purpose Saw Blades

    This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may…

    From: $40.97
  10. Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    Freud® LU77M Industrial Thin Kerf Non-Ferrous Metal Saw Blades

    This thin kerf, heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray…

    From: $62.47
  11. Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    Freud 10x30 Thin Kerf Glue Line Rip Blade, LM75R010

    With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick. Technical Details:* A super-thin .091" kerf requires less power and allows for a faster feed rate, while laser-cut…

    4 Review(s)
    $59.97
  12. Freud LU91R Thin Kerf Sliding Compound Miter Saw Blades

    Freud LU91R Thin Kerf Sliding Compound Miter Saw Blades

    …thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus…

    6 Review(s)
    From: $63.97
  13. Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    Freud® LU91M Industrial Thin Kerf Sliding Compound Miter Saw Blades

    …thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus…

    From: $55.47
  14. 10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    10'' x 40T Forrest Woodworker II Thin Kerf General Purpose Blade

    This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade. The Woodworker II is a top-quality general purpose blade. This thin kerf version of the WWII is…

    19 Review(s)
    $114.99
  15. Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    Freud® LU88R Industrial Thin Kerf Fine Finish Crosscut Saw Blades

    …coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring…

    1 Review(s)
    From: $49.47
  16. Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    Freud® LU96R Industrial Thin Kerf Double Sided Laminate Melamine Saw Blades

    The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent…

    1 Review(s)
    From: $65.97
  17. Forrest Chopmaster Saw Blades

    Forrest Chopmaster Saw Blades

    …runout of .001/.002 for maximum cut quality.* Four ATB teeth and one FT tooth arrangement provides steady, clean cuts with no bottom splintering.* 26317 - 8" Blade, 3/32" Kerf, 60 Tooth, 5/8" Arbor* 20018 - 10" Blade, 7/64" Kerf, 80 Tooth, 5/8" Arbor* 29628 - 12" Blade, 1/8" Kerf, 80 Tooth, 1" Arbor

    7 Review(s)
    From: $114.99
  18. Festool Aluminum/Plastic-Cutting Kapex Blade

    Festool Aluminum/Plastic-Cutting Kapex Blade

    …alternating blade teeth are beveled on both sides. These beveled teeth alternate with the flat teeth when cutting into the material for smoother and more efficient cutting. This tooth shape is ideal for cutting aluminum, hard plastic, and materials with hard coatings. The thin kerfed blade design…

    $140.00
  19. Freud® Premier Fusion Saw Blade

    Freud® Premier Fusion Saw Blade

    …heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. Also available as a thin kerf blade. Technical Details* Laser-cut…

    8 Review(s)
    $99.97
  20. Festool 64-Tooth Laminate Kapex Saw Blade

    Festool 64-Tooth Laminate Kapex Saw Blade

    …Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and cleaner cut. This tooth shape is ideal for cutting solid surface materials, plastics, and materials with hard coatings such as laminate flooring. The thin kerfed blade design meets less resistance,…

    $140.00
  21. Festool Universal 60-Tooth Kapex Saw Blade

    Festool Universal 60-Tooth Kapex Saw Blade

    …for glue-ready joints. The Universal blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and cleaner cut in all types of wood. The thin kerfed blade design meets less resistance, for…

    $135.00
  22. Festool 80-Tooth Fine Tooth Kapex Saw Blade

    Festool 80-Tooth Fine Tooth Kapex Saw Blade

    …hard and soft woods. The Fine Tooth blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and cleaner cut in all types of wood. The thin kerfed blade design meets less resistance for…

    $146.00
  23. Forrest Woodworker I General Purpose Blade

    Forrest Woodworker I General Purpose Blade

    A top-quality thin kerf general purpose blade that's perfect for table saws under 3HP. The WWI gives you scratch free and polished cuts on stock up to 2" thick. Thin kerf saves wood loss on each cut and reduces power drain on your saw. Perfect for general purpose cutting on non-sliding miter saws…

    $131.99
  24. Universal Scroll Saw Spiral Blades

    Universal Scroll Saw Spiral Blades

    …All blades are 5" long and have plain unpinned ends. Technical Details* Can be used on scroll saws, handheld fret saws or jeweler's saw frames* Made from hardened and tempered high-carbon steel* #0 blades are .032" kerf with 48 TPI* #2 blades are .035" kerf with 41 TPI* #4 blades are .041" kerf with…

    $6.29
  • Items 1 - 24 of 65
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X