Knob Tightening

  • Items 1 - 24 of 30
  • Page:
    1. 1
    2. 2
  1. 3-Star Knob for Shop Jigs

    3-Star Knob for Shop Jigs

    3-Star Knob is ideal for assembling small jigs and fixtures. Three-prong design makes tightening and loosening adjustments easy. Technical Details* 5/8" diameter* 1/4"-20 threaded steel insert

    $3.19
  2. Rockler Miter Slot Hardware Kit

    Rockler Miter Slot Hardware Kit

    …with a standard 3/4" wide x 3/8" deep miter gauge slot. Hardware kit allows you to make your own jigs and hold-downs. * 4-3/4" long slot bars fit both square and T-shaped miter gauge slots, and expand in the slot as you tighten the knob.* Kit includes two slot bars, knobs with screws, and washers.

    27 Review(s)
    $7.99
  3. Bench Cookie Plus® T-Track Kit

    Bench Cookie Plus® T-Track Kit

    …in place, but the additional height creates space for saw blades and router bits beneath the workpiece. Simply spin the Bench Cookies and they tighten themselves down, then add a final cinch for good measure. Bench Cookie Plus® T-Track Kit Includes:* Bench Cookie Plus® Work Grippers, 4-Pack*…

    $54.97
  4. 3/4" Round Knob, insert, 10-24 tpi

    3/4" Round Knob, insert, 10-24 tpi

    …jigs and fixtures is much easier with these handy knobs. Textured knob edge provides excellent grip to hand tighten or loosen your setups. Choose from knobs which include a threaded insert or a bolt according to your needs. Technical Details* 3/4" knob diameter* 34186 includes a 10-24 TPI threaded…

    $1.99
  5. 3/4" Round Knob, 1/2" long bolt, 10-24 tpi

    3/4" Round Knob, 1/2" long bolt, 10-24 tpi

    …jigs and fixtures is much easier with these handy knobs. Textured knob edge provides excellent grip to hand tighten or loosen your setups. Choose from knobs which include a threaded insert or a bolt according to your needs. Technical Details* 3/4" knob diameter* 34186 includes a 10-24 TPI threaded…

    $1.89
  6. Solid Brass Support

    Solid Brass Support

    Add a distinctive look to drafting tables as shown, or on the inside of chests and boxes for a lid support. Technical Details:* Knob tightens at any point along the 10" arm.* Base is 3/4" wide x 2-1/4" long.* Screws included.* Made from solid brass with a polished, lacquered finish.* Price for each…

    4 Review(s)
    $25.19
  7. Rockler Trim Router Circle Jig

    Rockler Trim Router Circle Jig

    …a sharp point for holding steady in soft wood, use the other if you're willing to drill a center hole).* Includes a T-bolt with 4-star tightening knob to tighten the center pivot pin to the jig for worry-free, no-slip routing.* Includes hardware to mount any one of a variety of routers to the jig.…

    $36.99
  8. Rockler Miter-Tight Picture Frame Clamp

    Rockler Miter-Tight Picture Frame Clamp

    …out of frame joints with this convenient clamp. Spring-loaded jaws transfer clamping pressure directly to the joint. The large ergonomic knob easily tightens jaws onto frames 5/8" to 2-7/8" wide. Back jaws adjust up to 1° to ensure a perfect fit if joint is slightly out of square. Open design…

    6 Review(s)
    $77.99
  9. Scissors Jig SVX-150 for Tormek T-7 Sharpening System

    Scissors Jig SVX-150 for Tormek T-7 Sharpening System

    …scissors and garden shears you use both clamps. You adjust the clamp to fit the scissors' thickness with the screw. You lock the scissors by tightening the knob. The support plate has a sliding surface, so the holder with the scissors can easily be moved while it is pressed onto the plate. Best Used…

    $54.00
  10. Rockler Circle Cutting Jig

    Rockler Circle Cutting Jig

    …drilling a center hole). A recessed groove in the jig lets you slide the center pivot pin (your center point) up or down the length of the jig to find the correct, exact diameter of your circle. Use the 4-star knob to tighten the T-bolt with the center pivot pin installed and you're ready to go!

    6 Review(s)
    $29.99
  11. Rockler Adjustable Clamp-It® Assembly Square

    Rockler Adjustable Clamp-It® Assembly Square

    …polycarbonate to ensure strength and accuracy.* Clamp and fasten projects with odd angles or typical 4-, 6-, 8- and 12-sided frames.* Knob twists for tightening and loosening, while interlocking teeth securely set angle.* Assembles in seconds. Find the right Clamp-It® for every project! Also…

    26 Review(s)
    $19.99
  12. Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    Long Knife Jig SVM-140 for Tormek T-7 Sharpening System

    …towards the edge. The jig comprises an adjustable clamp for holding knives of any thickness and an adjustable stop. You adjust the jig to the knife thickness with the screw. You lock the tool by tightening the knob. Best Used With: 35254 -Tormek T-7 Sharpening System Click Here to View Instructions:

    $56.00
  13. Rockler Quick-Release Corner Framing Clamp Kit

    Rockler Quick-Release Corner Framing Clamp Kit

    New and improved design features quick-release knobs on all four corners for fast, easy adjustments. Corners tighten independently, so you can add pressure wherever it is needed! With 45-1/2" max. opening capacity.This 20 pc. kit includes (8) 1/4" x 20 threaded rods,(4) Quick release threaded nuts,…

    45 Review(s)
    $19.99
  14. Universal Gouge Jig SVD-185 for Tormek T-7 Sharpening System

    Universal Gouge Jig SVD-185 for Tormek T-7 Sharpening System

    …maximum of 1" width. Also for turning cutters. The jig comprises a tool holder which runs in a sleeve. The tool is aligned with a disc and tightened with a knob screw. There is a washer for wide gouges. The stop ring can be set for a convex bevel with a screw. The tool holder can be set in any…

    2 Review(s)
    $97.00
  15. Rockler Pro Shelf Drilling Jig

    Rockler Pro Shelf Drilling Jig

    Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows. * Guarantees each row is perfectly in line* Spaces each hole exactly 37mm from the edge of your stock* Jig is easy to set up and easy to adjust for multiple rows* Rows are spaced exactly…

    16 Review(s)
    $84.99
  16. Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

    Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows. * Guarantees each row is perfectly in line* Spaces each hole exactly 37mm from the edge of your stock* Jig is easy to set up and easy to adjust for multiple rows* Rows are spaced exactly…

    $111.47
  17. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …fits all routers with edge guide rod drillings, and unlike similar jigs, it requires no screws or drivers to install, just slide it on and tighten the knobs. Technical Details:* Note: Fits most routers with edge guide rod drillings.* Adjustable Dadoing or Trenching with a clamp guide: Set the clamp…

    7 Review(s)
    $79.99
  18. Multi-Utility Pry Bar

    Multi-Utility Pry Bar

    …Two nail pullers on either end take care of stubborn fasteners. The tool even includes 1/2" and 3/4" 12-point socket holes for loosening and tightening bolts and nuts. • The Grip-On Multi Utility Pry Bar measures 5-1/2"W x 15-1/8"L • Innovate 4-function design: prying, splitting, bending…

    $34.99 $19.99

    SAVE 43%

  19. Adjustable Pulls

    Adjustable Pulls

    …unscrew the bases completely from theclamping rings, loosen the set screws from the rings and slide the rings to thedesired location. Then tighten the set screws and bases. You're ready to install yourpull for a unique look. Adjustable to 4-1/4" from base to base. 4-3/4" overall length.Mounting…

    2 Review(s)
    $12.99
  20. FastCap Euro Door Stops for Inset Doors, Brown

    FastCap Euro Door Stops for Inset Doors, Brown

    …problem. No bulky wooden stops, just a compact plastic button with one screw. To adjust, simply rotate the stop until the door sits flush, and tighten down. Sold in packs of 10. Brown. Also available in white. Technical Details:* Eccentric hole allows you to adjust doors within a very wide range.*…

    $2.49
  21. FastCap Euro Door Stops for Inset Doors, White

    FastCap Euro Door Stops for Inset Doors, White

    …problem. No bulky wooden stops, just a compact plastic button with one screw. To adjust, simply rotate the stop until the door sits flush, and tighten down. Sold in packs of 10. White. Also available in brown. Technical Details:* Eccentric hole allows you to adjust doors within a very wide range.*…

    $2.49
  22. SAE Flat Washers

    SAE Flat Washers

    …spread the load of metal fasteners, providing extra protection against pull-through, and protecting the surface from marring when the fastener is tightened down. Note: Listed dimensions indicate what size bolt the washer is compatible with, not the diameter of the washer. Technical Details:* Inner…

    $1.29
  23. Frame Clamp Kit

    Frame Clamp Kit

    Tightens all four corners simultaneously for ease of use. Adjustable clamp is self-squaring as it pulls all four corners together. Reversible jaws work for either small or large frames. Clamps anywhere in a range from 5" x 7" to 26" x 30" . Quickly and easily folds for compact storage. Technical…

    39 Review(s)
    $34.99
  24. Jet® 10'' Compound Miter Saw

    Jet® 10'' Compound Miter Saw

    …and lightweight for easy transport* Versatile base can mount to a stand or work bench* Hold-down clamp tightens securely to the work piece to ensure an accurate cut* Oversized ergonomic knobs provide ease of use and maximum control* Ergonomic D-shaped over-molded handle for maximum control during…

    $299.99
  • Items 1 - 24 of 30
  • Page:
    1. 1
    2. 2
Feedback X