Knurled

  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
  1. Decorative Solid Brass Knurled Knobs-Select size

    Decorative Solid Brass Knurled Knobs-Select size

    More decorative than a wing nut and bolt and easier to handle. 9/16" diameter knob. 4 per pack.

    4 Review(s)
    From: $7.39
  2. Rockler Wheel Marking Gauge

    Rockler Wheel Marking Gauge

    …creating a natural pull that forces the face of the gauge against your work piece for straight, wander-free marks. Features a solid brass body, knurled lock nut, graduated scales and a recess to protect the cutter in storage. Additional features:* Shaft has graduated scales (1 mm and 1/8 inch…

    26 Review(s)
    $16.49
  3. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …no fiddly screws or cantering jigs required.* Micro Adjuster - High precision router cutter position can be attained and repeated using the knurled and indexed micro adjuster.* 2" Bakelite Ball Handle - Ergonomic design, comfortable to the touch.* Indexed Rule - The self adhesive Imperial/Metric…

    7 Review(s)
    $79.99
  4. Pen Turning Mandrel, #2 Morse Taper

    Pen Turning Mandrel, #2 Morse Taper

    …bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!This Pen Turning Mandrel system includes a #2 morse taper arbor for use with a #2 morse taper lathe, 7 mm mandrel shaft and knurled nut. Also available for #1 Morse Taper Mandrel (Sold Separately).

    $17.49
  5. Pen Turning Mandrel, #1 Morse Taper

    Pen Turning Mandrel, #1 Morse Taper

    …bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required! This Pen Turning Mandrel system includes a #1 morse taper arbor for use with a #1 morse taper lathe, 7 mm mandrel shaft and knurled nut. Also available for #2 Morse Taper Mandrel (Sold Separately).

    $15.99 $9.99

    SAVE 38%

  6. 4-in-1 Screwdriver Turning Kit

    4-in-1 Screwdriver Turning Kit

    …handle and construct a 4-in-1 screwdriver with this kit.* Included components are a square #1/square #2 bit, a slotted/Phillips bit, brass ferrule, knurled insert, and a reversible shaft that accepts 1/4" bits.* 36769 replacement tube (sold separately) is to convert older models (37707) with 1/4"…

    11 Review(s)
    $6.99
  7. iGaging 9'' Ebony Sliding T-Bevel

    iGaging 9'' Ebony Sliding T-Bevel

    …9" blade pivots and slides, and is locked in place with a comfortable knurled knob. Technical Details:* The Ebony Sliding T-Bevel gauge features a 9" long blued steel blade.* Ebony handle measures 6" long.* Brass wear strips are inlaid flush with handle.* Comfortable round knurled locking knob

    $37.99
  8. Round Top Protractor #19

    Round Top Protractor #19

    …arm moves smoothly and extends roughly sixinches from the head. Additional features:* Great for angle-reading * Ideal for scribing* Durable knurled lock-nut secures the blade at any angle Specifications:* Angle reading plate width: 3-1/2"* Angle reading plate height: 2"* Arm length (overall):…

    $15.99
  9. Side Handle SOV-SH for Sorby Sovereign Turning Tool System

    Side Handle SOV-SH for Sorby Sovereign Turning Tool System

    …similarly designed side handle. The threaded end simply screws into the threaded opening on the side of the Sovereign handle to maximize command of your tools. Extra control is especially useful for deep hollowing applications. Softex grip dampens vibration and knurled end provides surface grip.

    $22.49
  10. Edge Routing Dust Port

    Edge Routing Dust Port

    …dust port.* Installs easily onto any router baseplate that accepts a standard Porter Cable template guide bushing.* Knurled nut offers tool-free installation.* Thread pattern for knurled nut is the same as a Porter Cable guide bushing, meaning replacement nuts are easily available.* Works with bits…

    19 Review(s)
    $11.99
  11. Starter Pen Turning Kit

    Starter Pen Turning Kit

    …turning custom pens. Includes 3 pen blanks (Bloodwood, Bubinga and Olivewood), 3 gold-plated hardware kits with twist mechanisms, 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill for truing up all mating surfaces and a…

    14 Review(s)
    $72.49
  12. 8'' Wing Compass

    8'' Wing Compass

    …surface. Two huge wings spread out up to 10-1/2" for a maximum circle diameter of 21", and close down completely to scribe even the smallest sliver for cabinetry installation. Solid steel. Knurled locking nut holds your setting tight, while the powder-coated finish keeps it looking sharp for years.

    5 Review(s)
    $28.99
  13. Plateau Magnifying Glass Hardware Kit

    Plateau Magnifying Glass Hardware Kit

    …Glass Hardware Kit provides you with: (1) 2 1/2'' hardened optical acrylic lens, attachment hardware, a #2 morse taper arbor, mandrel shaft, knurled nut and end pieces. Designed to fit a 7mm mandrel shaft, this kit will require Magnifying Glass Bushings, a Adjustable Mandrel #2 Taper, a 7mm…

    $7.59 $3.99

    SAVE 47%

  14. Key Ring Hardware Kit - Gold

    Key Ring Hardware Kit - Gold

    …no drill chuck required! This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen…

    1 Review(s)
    $3.99 $2.49

    SAVE 38%

  15. Biesemeyer 18-901 Universal Drill Press Fence

    Biesemeyer 18-901 Universal Drill Press Fence

    …a snap.Fence body is 24"L x 2-1/2" x 1". Includes: * Fence body (24"L x 2-1/2" x 1") * (2) Mounting clamp assemblies* Low-profile flip stop assembly* High-profile flip stop assembly* Knurled thumb screw for high-profile flip stop extension Note: This drill press is designed to work with a T-track.

    $69.99
  16. Festool Domino® Trim Stop for DF500/DF700 Joiners

    Festool Domino® Trim Stop for DF500/DF700 Joiners

    …Domino® DF500 and XL DF700 Joiners.* Mortises ends of material between 7/8" and 2-3/4" (22 mm and 70 mm) in width.* Slides easily onto the faceplate of either the DF500 or XL DF700 Domino Joiner, then locks down with knurled knobs.* Stops are independantly adjustable for off-center mortises.

    $68.00
  17. Pro Pen Turning Mandrel, #1 Morse Taper

    Pro Pen Turning Mandrel, #1 Morse Taper

    …onto the shaft and tighten it at the correct location for your blank. This Pro Pen Turning Mandrel includes a #1 morse taper arbor for use with a #1 morse taper lathe, a 7mm mandrel shaft and knurled nut. The mandrel is also available with a #2 Morse Taper (49514, sold separately).

    $13.99
  18. Pro Pen Turning Mandrel, #2 Morse Taper

    Pro Pen Turning Mandrel, #2 Morse Taper

    …onto the shaft and tighten it at the correct location for your blank. This Pro Pen Turning Mandrel includes a #2 morse taper arbor for use with a #2 morse taper lathe, a 7mm mandrel shaft and knurled nut. The mandrel is also available with a #1 Morse Taper (44309, sold separately).

    $14.99
  19. Rockler Dado Jig for Low Profile Straight Edge Clamp System

    Rockler Dado Jig for Low Profile Straight Edge Clamp System

    …than the nominal thickness, and for lumber that's been planed toan odd size. Operation is simple! Once you've set your thickness with the scale and knurled knobs, just run the first shoulder of the dado with one edge of the jig up against any straight edge, then flip the jig around and run the other…

    1 Review(s)
    $32.99
  20. Router Raizer

    Router Raizer

    …made with a speed wrench that fits through a small hole drilled through your insert plate. When hand-held, adjustments are made from the top with a knurled adjustment knob that also works with the speed wrench. Router Raizer includes all the necessary components, instructions, and templates you need…

    15 Review(s)
    $104.99
  21. iGaging Ebony Marking/Mortise Gauge

    iGaging Ebony Marking/Mortise Gauge

    …to ensure a stable reference surface.* Mortise Gauge measures 8" long, beam is 3/4" square.* Head measures 2-1/4" x 2-1/2" x 1-1/8".* Comfortable, knurled locking screw locks onto brass wear strip for no-slip performance.* Double pins adjust from about 1/4" to 2".* Adjustments are calibrated with a…

    2 Review(s)
    $44.99
  22. Rockler Auto-Lock T-Track Clamp

    Rockler Auto-Lock T-Track Clamp

    …of the CNC Shark tables (e.g. 54900)* An optional Mounting Bracket (57940) is available for securing the clamp to shop-made jigs and fixtures* Knurled wheel secures the clamp to your T-track* Bottom-mounted alignment pins can be repositioned at 45° for angled clamping* Adjustment screw is easily…

    1 Review(s)
    $29.99
  23. Robert Sorby Sovereign Turning Handles-Sovereign Handle

    Robert Sorby Sovereign Turning Handles-Sovereign Handle

    …accessory Side Handle - very useful for rotational control with large turnings. Technical Details:* Steel core for strength and vibration-dampening.* Knurled aluminum ends for corrosion resistance and balance.* Core is hollow, allowing shank to be inserted to deepest possible depth, reducing flexing…

    From: $51.99
  24. Robert Sorby Sovereign Ultima Hollowing System

    Robert Sorby Sovereign Ultima Hollowing System

    …combination of aluminum and alloy for strength, balance, and vibration dampening qualities* Comfortable, Softex grip Sovereign handle* Additional knurling provides a non-slip surface* Will accept turning chisels with a 5/8" diameter* Also accepts turning chisels with 3/8" and 1/2" diameters using…

    $262.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
Feedback X