Knurled Nut

  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
  1. Decorative Solid Brass Knurled Knobs-Select size

    Decorative Solid Brass Knurled Knobs-Select size

    More decorative than a wing nut and bolt and easier to handle. 9/16" diameter knob. 4 per pack.

    4 Review(s)
    From: $7.39
  2. Starter Pen Turning Kit

    Starter Pen Turning Kit

    …turning custom pens. Includes 3 pen blanks (Bloodwood, Bubinga and Olivewood), 3 gold-plated hardware kits with twist mechanisms, 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill for truing up all mating surfaces and a…

    14 Review(s)
    $72.49 $59.99

    SAVE 17%

  3. Pen Turning Mandrel, #1 Morse Taper

    Pen Turning Mandrel, #1 Morse Taper

    …bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required! This Pen Turning Mandrel system includes a #1 morse taper arbor for use with a #1 morse taper lathe, 7 mm mandrel shaft and knurled nut. Also available for #2 Morse Taper Mandrel (Sold Separately).

    $15.99 $9.99

    SAVE 38%

  4. Rockler Wheel Marking Gauge

    Rockler Wheel Marking Gauge

    …a natural pull that forces the face of the gauge against your work piece for straight, wander-free marks. Features a solid brass body, knurled lock nut, graduated scales and a recess to protect the cutter in storage. Additional features:* Shaft has graduated scales (1 mm and 1/8 inch increments)…

    26 Review(s)
    $16.49
  5. Edge Routing Dust Port

    Edge Routing Dust Port

    …router baseplate that accepts a standard Porter Cable template guide bushing.* Knurled nut offers tool-free installation.* Thread pattern for knurled nut is the same as a Porter Cable guide bushing, meaning replacement nuts are easily available.* Works with bits up to 1" in diameter.* Works with…

    18 Review(s)
    $15.99
  6. Pen Turning Mandrel, #2 Morse Taper

    Pen Turning Mandrel, #2 Morse Taper

    …bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required!This Pen Turning Mandrel system includes a #2 morse taper arbor for use with a #2 morse taper lathe, 7 mm mandrel shaft and knurled nut. Also available for #1 Morse Taper Mandrel (Sold Separately).

    $17.49
  7. 8'' Wing Compass

    8'' Wing Compass

    …surface. Two huge wings spread out up to 10-1/2" for a maximum circle diameter of 21", and close down completely to scribe even the smallest sliver for cabinetry installation. Solid steel. Knurled locking nut holds your setting tight, while the powder-coated finish keeps it looking sharp for years.

    5 Review(s)
    $28.99
  8. Key Ring Hardware Kit - Gold

    Key Ring Hardware Kit - Gold

    …drill chuck required! This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings.…

    1 Review(s)
    $3.99 $2.49

    SAVE 38%

  9. Plateau Magnifying Glass Hardware Kit

    Plateau Magnifying Glass Hardware Kit

    …drill chuck required! This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#43537) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings.…

    $7.59 $3.99

    SAVE 47%

  10. Pro Pen Turning Mandrel, #1 Morse Taper

    Pro Pen Turning Mandrel, #1 Morse Taper

    …onto the shaft and tighten it at the correct location for your blank. This Pro Pen Turning Mandrel includes a #1 morse taper arbor for use with a #1 morse taper lathe, a 7mm mandrel shaft and knurled nut. The mandrel is also available with a #2 Morse Taper (49514, sold separately).

    $13.99
  11. Pro Pen Turning Mandrel, #2 Morse Taper

    Pro Pen Turning Mandrel, #2 Morse Taper

    …onto the shaft and tighten it at the correct location for your blank. This Pro Pen Turning Mandrel includes a #2 morse taper arbor for use with a #2 morse taper lathe, a 7mm mandrel shaft and knurled nut. The mandrel is also available with a #1 Morse Taper (44309, sold separately).

    $14.99
  12. Round Top Protractor #19

    Round Top Protractor #19

    …arm moves smoothly and extends roughly sixinches from the head. Additional features:* Great for angle-reading * Ideal for scribing* Durable knurled lock-nut secures the blade at any angle Specifications:* Angle reading plate width: 3-1/2"* Angle reading plate height: 2"* Arm length (overall):…

    $15.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 12 of 12
  • Page:
    1. 1
Feedback X