Laminate Router

  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
  1. Bosch Colt™ Variable-Speed Palm Router Kit

    Bosch Colt™ Variable-Speed Palm Router Kit

    Put power and precision in the palm of your hand!* While it may look like a laminate trimmer, this compact (7-1/2" high) and lightweight (3.3 lbs.) router is more than shop-worthy with a 1.0 HP (max.), 5.7 amp motor - the highest rating in its class.* 16,000-35,000 RPM. The Colt is perfect for hinge…

    23 Review(s)
    $129.99
  2. Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    …speed: 10,000 - 26,000 RPM* Maximum bit diameter: 1"* Fine adjustment: 1/256" (1/10 mm)* Connection for dust extraction: 1"Best Used With:* Parallel Edge Guide for Festool MFK 700 Router* 1.5° Base for Festool MFK 700 Trim Router* 0° Horizontal Base Unit for Festool MFK 700 Trim Router

    $525.00
  3. Rockler Trim Router Table

    Rockler Trim Router Table

    …easy to detach your router from the table without tools. Use your router with the included 1/4" thick acrylic base to do freehand work like a standard router. The acrylic base not only provides a wide, level base for freehand work, it's pre-drilled to fit most popular trim routers. Also includes an…

    9 Review(s)
    $64.49
  4. Rockler Undersized Straight Router Bits - 1/4" Shank

    Rockler Undersized Straight Router Bits - 1/4" Shank

    These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut…

    21 Review(s)
    From: $13.99
  5. Freud® Top and Bottom Bearing Flush Trim Router Bits

    Freud® Top and Bottom Bearing Flush Trim Router Bits

    …for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts all hardwoods, softwoods, plastic laminates and veneered plywood. Use on hand-held routers, laminate trimmers, and table-mounted portable routers.

    From: $34.47
  6. Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    Freud® Downshear Helix Flush Trim Router Bits - 1/2" Shank

    …cabinet sides, for example. They can also be used for trimming laminate counter tops and doing pattern work. The downshear cutting angle produces a slicing action for chip-free, splinter-free cuts on the top surface of laminates, veneers, and in thicker materials as well.* 3/4" diameter body and…

    3 Review(s)
    From: $32.97
  7. Rockler Router Plate Template

    Rockler Router Plate Template

    Get a custom fit for your router table plate with this easy-to-use template. With an 8-1/4" x 11-3/4" design, it is perfectly sized for Rockler router plates and Bench Dog router plates.* Templates are made of 1/2" MDF material.* Instructions are permanently affixed to the template.* We suggest…

    15 Review(s)
    $10.99
  8. Freud® 66-100 Solid Carbide Bevel Trim Router Bit - 1/4" Dia x 1/4" H x 1/4" Shank

    Freud® 66-100 Solid Carbide Bevel Trim Router Bit - 1/4" Dia x 1/4" H x 1/4" Shank

    routers, table-mounted portable routers, and laminate trimmers. * The Freud 66-100 solid carbide bit creates a 7-degree bevel and touts a self-piloting feature that eliminates the expense and upkeep of a ball bearing assembly.* Cuts all plastic laminates.* Can be used with hand-held routers,

    $9.47
  9. Freud® 64-100 Solid Carbide Flush Trim Router Bit - 1/4" Dia x 3/8" H x 1/4" Shank

    Freud® 64-100 Solid Carbide Flush Trim Router Bit - 1/4" Dia x 3/8" H x 1/4" Shank

    …ball-bearing assembly. Ideal for laminate trimming, where the adhesive can quickly gum up a ball-bearing guide. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and tablemounted portable routers. * Features TiCo™…

    $9.47
  10. Porter Cable 450 Compact Router, Fixed Base

    Porter Cable 450 Compact Router, Fixed Base

    This new compact router from Porter-Cable offers the comfortable ergonomics of a trim router with the power and features of its full-sized brethren. With 1-1/4 hp, it's perfect for a variety of tasks, from trimming laminate, cutting flutes, edge profiling and even mortising with the plunge base…

    2 Review(s)
    $129.00
  11. Porter Cable Model 7310 Palm Router

    Porter Cable Model 7310 Palm Router

    Excellent for trimming laminate plus general edge and corner trimming. Model #7310. The compact and lightweight design makes for easy freehand use. Technical Details:* Powerful 5.6 amp, 30,000 rpm motor* Micro-set depth of cut adjustment knob* 1/4" collet with spindle lock* Optional Tilt Base also…

    6 Review(s)
    $99.99
  12. Dewalt D26670 Heavy-Duty Laminate Trimmer

    Dewalt D26670 Heavy-Duty Laminate Trimmer

    Heavy-Duty Laminate Trimmer * 3 Year Limited Warranty Features & Benefits: * 5.6Amp, 30,000RPM motor provides the power for materials ranging from laminates to hardwoods* 1/4" collet fits a wide variety of router bits* Spindle lock for fast, one wrench bit change* Cast Aluminum base for durability…

    $98.99
  13. Dewalt D26670K Laminate Trimmer Kit

    Dewalt D26670K Laminate Trimmer Kit

    Laminate Trimmer Kit * 3 Year Limited Warranty Features & Benefits: * 5.6Amp, 30,000RPM motor provides the power for materials ranging from laminates to hardwoods* 1/4" collet fits a wide variety of router bits* Spindle lock for fast, one wrench bit change* Cast Aluminum base for durability in a…

    $206.99
  14. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Our High Pressure Laminate (HPL) tables are redesigned, with many new features and even more configured packages to meet your needs. The white HPL surface improves visibility, and the 1-1/8" thick MDF tables are strong enough to support even the largest routers. The 1/4" aluminum plates are…

    3 Review(s)
    $349.99
  15. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition materials, plywoods, hardwoods, and softwoods. * Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    3 Review(s)
    From: $50.97
  16. Rockler High Pressure Laminate Router Table Top

    Rockler High Pressure Laminate Router Table Top

    Our High Pressure Laminate Router Table Tops have been newly redesigned with a dual-track miter slot in the table, and a whiter, brighter finish for improved visibility. The 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, such as the Incra gauge, while the adjacent…

    1 Review(s)
    $99.99
  17. Bosch Colt PR20EVSPK Palm Router/Plunge Base Combo Kit

    Bosch Colt PR20EVSPK Palm Router/Plunge Base Combo Kit

    This package bundles the Bosch Colt PR20EVS Palm Router with the new Bosch PR011 Plunge Base for a duo that rivals much larger routers. The Colt palm router is already famous in its own right with big router features like a powerful 1-HP soft-start motor, Constant Response Circuitry for maintaining…

    $189.99
  18. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    …cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material.…

    From: $17.99
  19. DeWalt DWP611 Compact Router, Fixed Base

    DeWalt DWP611 Compact Router, Fixed Base

    …lightweight router with variable speed control offers the comfortable ergonomics of a trim router and the power and features of its full-sized cousins. LED lighting in base with clear sub-base for optimum visibility. With 1-1/4 hp, it's perfect for a variety of tasks, from trimming laminate, cutting…

    3 Review(s)
    $139.00
  20. Rockler High Pressure Laminate Router Table, Fence & Plate

    Rockler High Pressure Laminate Router Table, Fence & Plate

    Our High Pressure Laminate (HPL) tables are redesigned, with many new features and even more configured packages to meet your needs. The white HPL surface improves visibility, and the 1-1/8" thick MDF tables are strong enough to support even the largest routers. The 1/4" aluminum plates are…

    6 Review(s)
    $249.99
  21. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …included (over $900 value).* Includes 3/8" Diameter V-Groove Router Bit* Includes two Hold-down Clamps* Includes mounts for a Bosch Router (Router Motor is not included, sold separately) * Fully compatible with the Bosch Colt Palm Router* Free downloadable control program included* Download free…

    21 Review(s)
    $2899.99
  22. Porter Cable 1-3/4 HP D-Handle Router, Model #691

    Porter Cable 1-3/4 HP D-Handle Router, Model #691

    Porter-Cable's D-Handle, fixed base 691 1-1/2 HP, 27,500 RPM router is ideal for woodworking, remodeling, trim and home improvement projects. Its D-Handle delivers a low center of gravity and a trigger lock-on feature for increased tool control in hard and soft woods and engineered material like…

    2 Review(s)
    $183.99
  23. Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift

    Our High Pressure Laminate Router Tables are newly redesigned with a dual-track miter slot in the table and an included dust port. Plus, these packages include our acclaimed Router Lift FX for above-table adjustments and bit changes! New 3/4" T-profile miter slot allows you to use precision…

    $399.99
  24. Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    Rockler High Pressure Laminate Router Table, Fence, Stand, & FX Router Lift

    Our High Pressure Laminate Router Tables are newly redesigned with a dual-track miter slot in the table and an included dust port. Plus, these packages include a steel stand, and our acclaimed Router Lift FX for above-table adjustments and bit changes! New 3/4" T-profile miter slot allows you to use…

    0 Review(s)
    $499.99
  • Items 1 - 24 of 66
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X