Laminate Tools

  • Items 1 - 24 of 169
  • Page:
    1. 1
    2. 2
    3. 3
  1. Power Roller for Laminates and Veneer

    Power Roller for Laminates and Veneer

    The Power Roller packs maximum pressure for applying laminates and veneer. The heavy-duty bent handle is equipped with two ribbed vinyl grips ideal for applying maximum pressure. The Power Roller non-marking roller is made of durable rubber measuring 3" long by 1" in diameter. Techincal Details:*…

    4 Review(s)
    $24.99
  2. Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    Rockler Piloted Flush Trim Router Bits - 1/2" Shank

    …the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with…

    From: $17.99
  3. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    …for extremely thin strips. * Note: Ripping thin strips requires the use of a zero-clearance insert, sold separately.* The perfect tool for edging, inlay, bent laminations and more.* Solid phenolic for durability.* Low-profile miter track clamp locks in at any point along the miter track.* Also works…

    104 Review(s)
    $26.99
  4. Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    Festool MFK 700 EQ Set Trim Router with New T-Loc Systainer

    …a trim router-it's a cost-saving multi-purpose tool. It includes a standard router base for vertical trim routing, as well as a second base for horizontal applications. Simply attach the appropriate base, rather than reaching for a different tool, and you'll be equipped to trim veneers, handle any…

    $525.00
  5. Veneer Trimmer

    Veneer Trimmer

    Quickly and easily make perfectly clean, square cuts on PVC, melamine, polyester and veneer. This trimmer features double-sided blades and will cut strips up to 0.5 mm thick and 2" wide. Simply place the end trimmer on the end of the panel and firmly press the lever down. You'll get a high-quality…

    3 Review(s)
    $44.49
  6. J-Roller for Veneering

    J-Roller for Veneering

    Specially designed for applying laminate as well as veneer, the J-Roller provides 20-25 PSI for positive bonding. The wide non-marking rubber roller is ideal for flush work. Technical Details:* 14" aluminum handle* 3" wide non-marking roller* 2 soft vinyl hand grips* Provides 20-25 PSI* No axle…

    $17.49
  7. Saw Blade Laminate, TS 75 (72053, 495382)

    Saw Blade Laminate, TS 75 (72053, 495382)

    Tungsten-Carbide, triple-chip saw blade with positive hook specially designed for cutting laminate flooring and solid-surface countertop materials.

    $130.00
  8. Freud® Bevel Trim Router Bits - 1/4" Shank

    Freud® Bevel Trim Router Bits - 1/4" Shank

    …perfect candidates. Available in bevels of 8°, 15° and 45°, the bits cut all plastic laminates and can be used with handheld routers, table-mounted portable routers and compact laminate trimmers. 1/2" bearing guide.* TiCo™ Hi-Density carbide for longer bit life and a flawless…

    From: $28.97
  9. Freud® 41-502 Radius Laminate Trim Router Bit - 1/2" Dia x 3/8" H x 1/4" Shank

    Freud® 41-502 Radius Laminate Trim Router Bit - 1/2" Dia x 3/8" H x 1/4" Shank

    This Laminate Trimming Router Bit from Freud trims plastic laminate edges in a fraction of the time that it takes to hand file them. Plus, the 1/16" radius gives you a silky smooth edge with no burrs or sharp spots. It's ideal for countertop-grade laminates including Formica®, Wilsonart® and…

    $29.47
  10. Zero Clearance Inserts

    Zero Clearance Inserts

    Laminated 1/2" Phenolic Resin plates resist wear and offer frictionless sliding. Improved control minimizes tear out, reduces wood damage and increases safety. Insert Sizes:* 69163-1/2" thick x 3-3/4" wide x 14" long* 69155- 1/2" thick x 3-1/2" wide x 12-3/8" long* 69147- 1/2" thick x 3-3/4" wide x…

    48 Review(s)
    $29.99
  11. SawStop 30'' Out-Feed Table

    SawStop 30'' Out-Feed Table

    The SawStop 30" Out-Feed Table is designed for the CNS Contractor Saw, providing 30" of additional outfeed support. The table is constructed of 3/4" polyurethane coated MDF with machined miter gauge slots and all steel hardware. Table includes black powder-coated legs with adjustable feet to ensure…

    $99.00
  12. Edge Banding Machine

    Edge Banding Machine

    Discover why the pros use this edge banding machine! Allows you to easily apply hot-melt adhesive-backed edge banding to straight edges. Techincal Details:* Electronically controlled heating element is infinitely adjustable from 200° to 1100°.* 120 volts, 1500 watts. * Rear-mounted on/off…

    12 Review(s)
    $319.99
  13. Miter Trimmer

    Miter Trimmer

    …more planning, no more sanding, and no more tear-out on pre-finished frame moldings with this revolutionary miter trimmer! The secret is in the laminated blade with a shear cutting bevel and razor-sharp edge. It lets you cut off micro-fine slices for the most precise fit. Totally adjustable for 45…

    12 Review(s)
    $254.99
  14. Dewalt D26670K Laminate Trimmer Kit

    Dewalt D26670K Laminate Trimmer Kit

    Laminate Trimmer Kit * 3 Year Limited Warranty Features & Benefits: * 5.6Amp, 30,000RPM motor provides the power for materials ranging from laminates to hardwoods* 1/4" collet fits a wide variety of router bits* Spindle lock for fast, one wrench bit change* Cast Aluminum base for durability in a…

    $206.99
  15. Freud® Down-Spiral Router Bits - 1/2" Shank

    Freud® Down-Spiral Router Bits - 1/2" Shank

    …fibers to chip out the face. Also works great for cutouts and edgework. 1/2" shank. Application: Grooves and dadoes in single-sided veneers and laminates. * Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. * Cuts all composition…

    3 Review(s)
    From: $50.97
  16. Dewalt D26670 Heavy-Duty Laminate Trimmer

    Dewalt D26670 Heavy-Duty Laminate Trimmer

    Heavy-Duty Laminate Trimmer * 3 Year Limited Warranty Features & Benefits: * 5.6Amp, 30,000RPM motor provides the power for materials ranging from laminates to hardwoods* 1/4" collet fits a wide variety of router bits* Spindle lock for fast, one wrench bit change* Cast Aluminum base for durability…

    $98.99
  17. Festool 64-Tooth Laminate Kapex Saw Blade

    Festool 64-Tooth Laminate Kapex Saw Blade

    …superior cutting results. The carbide tipped Solid Surface/Laminate blade for the Kapex Miter Saw is a long-lasting, high cut quality blade for laminate flooring and solid surface countertop material. The Solid Surface/Laminate Blade incorporates an offset tooth design known as MATB (Modified…

    $140.00
  18. Rockler High Pressure Laminate Router Table Top

    Rockler High Pressure Laminate Router Table Top

    Our High Pressure Laminate Router Table Tops have been newly redesigned with a dual-track miter slot in the table, and a whiter, brighter finish for improved visibility. The 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, such as the Incra gauge, while the adjacent…

    1 Review(s)
    $99.99
  19. Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    Freud® LU97R Industrial Double Sided Laminate Melamine Saw Blades

    …finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting…

    2 Review(s)
    From: $90.47
  20. Freud® LU98R Industrial Single Sided Laminate Melamine Saw Blades

    Freud® LU98R Industrial Single Sided Laminate Melamine Saw Blades

    This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD® coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 10° hook angle and a…

    From: $85.97
  21. Freud® LU92M Industrial Thick Stock Laminate Saw Blades

    Freud® LU92M Industrial Thick Stock Laminate Saw Blades

    …and bottom of thick laminates and melamine. The LU92M series is ideal for cutting stacked 3/4" laminates and melamine. Each tooth has a special modified triple chip grind design created by computer simulation to breeze through thick stock and single or double-sided laminates, leaving a chip-free…

    From: $69.47
  22. Irwin 10" x 84T Marples TCG Laminate Saw Blade

    Irwin 10" x 84T Marples TCG Laminate Saw Blade

    This blade is specifically optimized to meet the unique demands of laminates, melamine and non-ferrous metals. 84 finely-spaced teeth combined with a robust TCG tooth geometry make chipout problems a thing of the past. The blade also features a thin kerf design, which reduces dust and material…

    $69.99
  23. Rockler High Pressure Laminate Router Table, Fence & Plate

    Rockler High Pressure Laminate Router Table, Fence & Plate

    Our High Pressure Laminate (HPL) tables are redesigned, with many new features and even more configured packages to meet your needs. The white HPL surface improves visibility, and the 1-1/8" thick MDF tables are strong enough to support even the largest routers. The 1/4" aluminum plates are…

    6 Review(s)
    $249.99
  24. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Our High Pressure Laminate (HPL) tables are redesigned, with many new features and even more configured packages to meet your needs. The white HPL surface improves visibility, and the 1-1/8" thick MDF tables are strong enough to support even the largest routers. The 1/4" aluminum plates are…

    3 Review(s)
    $349.99
  • Items 1 - 24 of 169
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X