Large Clock Inserts

  • Items 1 - 24 of 1270
  • Page:
    1. 1
    2. 2
    3. 3
There were no documents that contained all of the words in your query. These results contain some of the words.
  1. Large Serpentine Clock Hands

    Large Serpentine Clock Hands

    For a classical, decorative feel, adorn your clocks with these serpentine hands. Available in either brass or black finishes, each set includes hour, minute and second hands (second hand does not feature the spade design). Normally, the minute hand's sweep (measured from the center of the hole to…

    $4.99
  2. 2" Solid Brass Clock Inserts-Clocks

    2" Solid Brass Clock Inserts-Clocks

    …faces are sealed with a flat glass lens, while the back has a stainless steel cover. In the rear, the soft rubber gasket-ring makes mounting a simple task - just drill a 1-3/8" hole and push the insert in place. Choose from Gold or Silver, both with white faces and Arabic numerals. Battery included.

    1 Review(s)
    $20.99
  3. 2-3/4'' Clock Insert with Arabic Numerals

    2-3/4'' Clock Insert with Arabic Numerals

    A white face, Arabic numerals and a slimmer, more "European" pair of hour and minute hands give this clock a clean, modern appearance. With its gold colored metal bezel, it contrasts nicely with a variety of hardwoods. Compact size makes it well-suited for bedside tables, side tables and shelves.…

    1 Review(s)
    $13.69
  4. 3-1/2'' Quartz Clock Insert with Roman Numerals

    3-1/2'' Quartz Clock Insert with Roman Numerals

    An ivory face and roman numerals give this clock a stately appearance, while the gold bezel and beveled edge frame it nicely. Features a precision quartz movement with second hand. Pressure fits into a standard 3" hole. Operates on one "AA" battery (not included).

    1 Review(s)
    $13.19
  5. 3-1/2'' Quartz Clock Insert with Arabic Numerals

    3-1/2'' Quartz Clock Insert with Arabic Numerals

    A white face and Arabic numerals give this clock a clean, modern appearance, while the gold bezel and beveled edge provide nice contrast. Features a precision quartz movement with second hand. Pressure fits into a standard 3" hole. Operates on one "AA" battery (not included).

    4 Review(s)
    $12.59
  6. Decorator Clock Faces-Choose clock face

    Decorator Clock Faces-Choose clock face

    Clock faces have quartz movements. Easy to install. Just cut a hole and pop the fully assembled clock into place. Battery operated (not included). Use a 3" hole saw or large saw tooth bit for these 3-1/2" outside diameter clocks.

    3 Review(s)
    $18.49
  7. Large Router Plate Insert without Opening

    Large Router Plate Insert without Opening

    This interchangeable insert without an opening features a 4-3/8" outside diameter, allowing it to fit into a router plate with a 3-11/16" opening. Fits The Following Router Table Plates: Group C * Porter-Cable 7518* Porter-Cable 7519* Porter-Cable 7538* Porter-Cable 7539* Milwaukee 5625-20* Triton…

    $7.39
  8. Rockler Router Plate Insert With 1-1/2" Opening For Large Plates

    Rockler Router Plate Insert With 1-1/2" Opening For Large Plates

    The interchangeable insert for standard bits features a 1/2'' opening. The 4-3/8'' OD allows this insert to fit into a standard plate with a 3-11/16'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate C* Porter Cable 7518* Porter Cable 7519* Porter Cable 7538* Porter…

    $6.99
  9. Rockler Router Plate Insert With 2-1/2" Opening For Large Plates

    Rockler Router Plate Insert With 2-1/2" Opening For Large Plates

    The interchangeable insert for standard bits features a 2-1/2'' opening. The 4-3/8'' OD allows this insert to fit into a standard plate with a 3-11/16'' opening. Fits The Following Rockler Router Table Plates: Rockler Router Plate C* Porter Cable 7518* Porter Cable 7519* Porter Cable 7538* Porter…

    $8.99
  10. Large Pocket Pouch

    Large Pocket Pouch

    …fabric.* Steel belt clip for mounting on a belt or onto the 8-inch or 16-inch steel rails (46079 and 43875, sold separately).* In addition to the clip, there is also a belt loop.* Reinforced with a backer board insert for rigidity.* Wide base keeps pouch from tipping while resting on bench top.

    $7.99
  11. 3'' Clock Face, Fancy/Arabic Numerals

    3'' Clock Face, Fancy/Arabic Numerals

    Clock faces with quartz movements. Easy to install. Just cut a hole and pop the fully assembled clock into place. Battery operated (not included). Use a 3" hole saw or large saw tooth bit for these 3-1/2" outside diameter clocks. * Requires boring a 3" diameter hole that is between 5/8"…

    $18.49
  12. 3'' Clock Face, Gold/Arabic Numerals

    3'' Clock Face, Gold/Arabic Numerals

    Clock faces with quartz movements. Easy to install. Just cut a hole and pop the fully assembled clock into place. Battery operated (not included). Use a 3" hole saw or large saw tooth bit for these 3-1/2" outside diameter clocks. * Requires boring a 3" diameter hole that is between 5/8"…

    $18.49
  13. Rockler Router Plate Insert With 1-1/4" Opening For Guide Bushing Large Opening Plate

    Rockler Router Plate Insert With 1-1/4" Opening For Guide Bushing Large Opening Plate

    The interchangeable insert for standard guide bushings features a 1-1/4'' opening. The 4-3/8'' OD allows this insert to fit into a large opening plate with a 3-11/16'' opening.Fits The Following Rockler Router Table Plates: Rockler Router Plate C* Porter Cable 7518* Porter Cable 7519* Porter Cable…

    $8.29
  14. Solid Brass and Chrome Desk Clock Kit

    Solid Brass and Chrome Desk Clock Kit

    …knife between the edge of the clock face bezel and the brass housing. CAUTION: Be careful not to scratch the case surface with the blade.* 2.With a slight twist of the blade the face will pop out of the brass case.* 3.Pull off the rubber ring surrounding the insert* 4.To remove the back of the case…

    6 Review(s)
    $18.99
  15. Zero Clearance Inserts

    Zero Clearance Inserts

    …Phenolic Resin plates resist wear and offer frictionless sliding. Improved control minimizes tear out, reduces wood damage and increases safety. Insert Sizes:* 69163-1/2" thick x 3-3/4" wide x 14" long* 69155- 1/2" thick x 3-1/2" wide x 12-3/8" long* 69147- 1/2" thick x 3-3/4" wide x 13-3/8" long…

    48 Review(s)
    $29.99
  16. Confetti Lamp Inserts

    Confetti Lamp Inserts

    insert includes a fiberglass wick, wick holder and a glass insert which holds up to 2 ounces of lamp oil (not included). This will be enough to keep them burning for up to 2 hours. Set includes 4 inserts and 2 plastic funnels for filling oil. Technical Details:* 1-1/2" diameter oil lamp inserts*

    $12.99
  17. Kreg Large Bench Clamp, 6'' Reach

    Kreg Large Bench Clamp, 6'' Reach

    …as quickly removed to regain your perfectly flush work surface. Mounts easily to the Kreg Klamp Table™ (36078) or Kreg's insert plates (23228). Recess a Kreg insert plate into your workbench and use these clamps to start clamping where you've never been able to before. Additional features:*…

    4 Review(s)
    $34.99
  18. Nova SuperNova 2 Insert Chuck

    Nova SuperNova 2 Insert Chuck

    …was difficult to handle before. The SuperNova 2 requires only one hand to operate. Using a ball-nosed hex wrench with a large handle, its easy to tighten. This is an insert chuck, and requires you to purchase a dedicated Insert/Adapter for mounting on your lathe. Includes a set of 2" (50mm) jaws.…

    $199.99
  19. Carved 48 Inch Empress Leaf Insert Moulding-Create-A-Crown Inserts

    Carved 48 Inch Empress Leaf Insert Moulding-Create-A-Crown Inserts

    Infuse your designs with this modern, polished take on an ancient Egyptian banana leaf theme. Combine this Empress Leaf Carving Insert with either a Flat Moulding or Crown Moulding (sold separately) to create decorative components of your own design. Technical Details * Width: 2-1/4" *…

    From: $84.99
  20. Carved 48 Inch Create-A-Crown Acanthus Insert Moulding-Create-A-Crown Inserts

    Carved 48 Inch Create-A-Crown Acanthus Insert Moulding-Create-A-Crown Inserts

    Add an elegant touch to a room or project with this Creat-A-Crown Acanthus insert molding. Its beautifully carved scrolling leaves are available in a variety of hardwood species. Designed for use with Create-A-Crown plain crown molding or flat panel molding (sold separately). Technical Details *…

    From: $89.99
  21. Carved 48 Inch Create-A-Crown Weaved Insert Moulding-Create-A-Crown Inserts

    Carved 48 Inch Create-A-Crown Weaved Insert Moulding-Create-A-Crown Inserts

    Classic and beautifully carved, this weaved insert molding is the ideal accent for a variety of projects. Designed for use with Create-A-Crown plain crown molding or flat panel molding (sold separately). Available in a variety of hardwood species. Technical Details * 2-1/4" wide x 1/2" thick x 48"…

    $99.99
  22. Carved 48 Inch Bijou Create-A-Crown Insert Moulding-Create-A-Crown Inserts

    Carved 48 Inch Bijou Create-A-Crown Insert Moulding-Create-A-Crown Inserts

    Add the finishing touch to your projects with this Create-A-Crown Bijou insert molding. This Deco-inspired molding features graceful interwoven rings and is ideal for contemporary or retro decor. Designed for use with Create-A-Crown plain crown molding or flat panel molding (sold separately).…

    From: $104.99
  23. Carved 48 Inch Deco Create-A-Crown Insert Moulding-Create-A-Crown Inserts

    Carved 48 Inch Deco Create-A-Crown Insert Moulding-Create-A-Crown Inserts

    With its crisp symmetrical shapes, this carved insert molding is the perfect finishing touch for an Art Deco period interior or woodworking project. Designed for use with Create-A-Crown plain crown molding or flat panel molding (sold separately). Available in a variety of hardwood species. Technical…

    From: $84.99
  24. Foam Inserts for Maxisystainer Bottom

    Foam Inserts for Maxisystainer Bottom

    Festool Foam pad insert for bottom of Maxisystainer.

    $12.00
  • Items 1 - 24 of 1270
  • Page:
    1. 1
    2. 2
    3. 3
There were no documents that contained all of the words in your query. These results contain some of the words.
Feedback X