Lathe Chuck

  • Items 1 - 24 of 87
  • Page:
    1. 1
    2. 2
    3. 3
  1. Lathe Chuck and Tapers

    Lathe Chuck and Tapers

    chuck for lathe and two choices of morse tapers. Use this drill chuck and either the #1 Morse taper or #2 Morse taper listed to assemble as shown. Key is supplied with chuck. Both #20777 and either #20785 or #20793 need to be ordered to complete assembly as shown. This assembly is used on a lathe to…

    9 Review(s)
    From: $16.99
  2. Nova SuperNova 2 Insert Chuck

    Nova SuperNova 2 Insert Chuck

    …with a large handle, its easy to tighten. This is an insert chuck, and requires you to purchase a dedicated Insert/Adapter for mounting on your lathe. Includes a set of 2" (50mm) jaws. * Recommended for power workholding on lathes from 350mm (14") to 508mm (20") diameter swing.* Holds…

    $199.99
  3. Oneway Talon Chuck System

    Oneway Talon Chuck System

    This is an ideal chuck for owners of mini and mid-size lathes who want a power-grip, key-operated chuck. It's perfect for lathes with a 16" swing or less! Features single-hand key operation, patented over-extension safety system, 4-jaw scroll chuck and smooth-glide base jaw design. The nickel-plated…

    6 Review(s)
    $213.50
  4. Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    …Direct Thread Chuck is the smallest chuck in the Nova lineup—ideal for lathes with up to a 12" swing over the bed. Its small size minimizes the load on small spindles and bearings, yet is extremely accurate, and built to the same exacting standards as the SuperNova 2 and Titan Chucks. It also…

    $119.99
  5. Nova G3 Comet II Reversible Chuck

    Nova G3 Comet II Reversible Chuck

    …for the Nova Comet II Midi Lathe (46457, sold separately), but can be used on any lathe with a 1" 8-TPI RH thread. When used on non-reversing lathes, the set screw must be removed. Like the similar Nova G3, this chuck is a four-jaw, self-centering scroll chuck with a high-powered TuffLock™…

    $159.99
  6. 10'' Longworth Style Chuck

    10'' Longworth Style Chuck

    …strength and stability, regardless of humidity. Available in two sizes: the 10" Longworth Style Chuck for mini and midi lathes with a 10" swing, and the 16" Longworth Style Chuck for standard-sized lathes with a 16" swing or larger. Pick up a piece of fine china, and the first thing you'll do after…

    1 Review(s)
    $139.99
  7. Oneway Scroll Chuck System

    Oneway Scroll Chuck System

    …use. This prevents damage to holes in the chuck. Different jaw sets are available for the chuck, which allows you to fit the chuck to suit your specific needs. If your needs change or grow, these chucks can be adapted to change and grow as you do. The chuck weighs approximately 4.5 lbs. Standard…

    $195.29
  8. 4-Jaw Turning Chuck

    4-Jaw Turning Chuck

    …you to lock in square or odd-shaped stock on your lathe. Stepped jaws can also be reversed for added versatility. Technical Details:* Stepped jaws can also be reversed for added versatility.* Internal measurements: 5-1/4" max., 3/8" min.* 6" dia. chuck includes key.* 1" x 8 TPI insert and 3/4" x 16…

    $106.99
  9. Mini Jumbo Jaws for Oneway Scroll Chuck System

    Mini Jumbo Jaws for Oneway Scroll Chuck System

    Because of their 8-1/2" diameter, these Mini Jumbo Jaws for the Oneway Scroll Chuck (22719, sold separately) and Talon Chuck (20761, sold separately) work on smaller lathes. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the Mini Jumbo…

    $102.99
  10. Nova G3 Insert Chuck

    Nova G3 Insert Chuck

    chuck, and requires you to purchase a dedicated Insert/Adapter for mounting on your lathe. Includes a set of 2" (50mm) jaws. * Recommended for power workholding on lathes with up to a 400mm/16" diameter swing.* Up to 350mm/14" diameter bowls using 50mm/2" Jaws (supplied with chuck).* Up to…

    $149.99
  11. Nova Chuck Jaw Sets

    Nova Chuck Jaw Sets

    …the Nova chucks, allowing you to interchange the jaws across all chuck models to achieve different capacities. Some jaws, however, are not recommended for use with certain chucks. Features:* Nova chucks give you the same jaw fixing system and same insert/adaptersystem across all chuck models.* All…

    From: $36.99
  12. Pro Pen Turning Mandrel, #2 Morse Taper

    Pro Pen Turning Mandrel, #2 Morse Taper

    The essential tool for pen turning on a lathe! This precision-machined steel bar is held in the lathe to ensure accurate pen turning when using a live center. No drill chuck is required-the mandrel is held directly in the morse taper of your lathe! The brass compression fitting allows you to…

    $14.99
  13. Spigot Jaws for Oneway Talon Chuck

    Spigot Jaws for Oneway Talon Chuck

    …cups. Serrations on the outside provide excellent grip while expansion chucking. External (compression) chucking capacity: 1/4" to 1-5/8". Internal (expansion) chucking capacity: 1" to 2-3/8". Note: not to be used with the woodworm screw. For use with Oneway Talon Chuck (#20761, sold separately).

    $45.19
  14. Nova Titan 1-1/4" 8-TPI Direct Thread Chuck

    Nova Titan 1-1/4" 8-TPI Direct Thread Chuck

    The Nova Titan Chuck is a four-jaw, self-centering scroll chuck for large lathes with a 20" diameter swing or larger. It is the largest, most ruggedly built chuck in the Nova range - a full 5" in diameter - and provides super aggressive holding power. The TuffLock™ geared grip provides…

    $269.99
  15. Nova Spigot Jaw Sets

    Nova Spigot Jaw Sets

    …Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models.* All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.* Nova chucks are…

    From: $49.99
  16. Nova Cole Jaw Set

    Nova Cole Jaw Set

    …for lathes with a minimum 8Designed for lathes with a minimum 12"/300mm swing diameter. * Designed for lathes with a minimum 12"/300mm swing diameter.* Max workpiece diameter with Precision Midi chuck: 8.661" (external grip); 11" (internal grip).* Max workpiece diameter with Nova G3 chuck: 9.291"…

    0 Review(s)
    $83.99
  17. Nova Mini Cole Jaw Set

    Nova Mini Cole Jaw Set

    …sold separately) for lathes with a minimum 12"/300mm swing diameter. * Designed for lathes with a minimum 8"/203mm swing diameter.* Max workpiece diameter with Precision Midi chuck: 6.181" (external grip); 8.5" (internal grip).* Max workpiece diameter with Nova G3 chuck: 6.693" (external grip);…

    $65.99
  18. Chrome Bottle Stopper Hardware Kit

    Chrome Bottle Stopper Hardware Kit

    …See our Bottle Stopper Mandrel (43542, sold separately) for an easy way to chuck the small turning blank onto your lathe. Technical Details:* Chrome Bottle Stopper measures 3-1/8" long (without threaded stud) x 3/4"W.* Chuck shank measures 0.288" in diameter x 1-1/2" long.* Threaded stud measures…

    1 Review(s)
    $4.99 $3.49

    SAVE 30%

  19. Nova Lathe Handwheel

    Nova Lathe Handwheel

    …Nova lathes except for the Comet II Midi Lathe.* Used on outboard end of lathe headstock to position work by hand (lathe must be switched off).* Machined from solid 1045K steel.* User can add customized wooden outer wheel for extra comfort and personalization.* Hollow to allow for vacuum chucking.*

    $31.49
  20. Nova Chuck Spur Center

    Nova Chuck Spur Center

    …to allow the chuck jaws to close over it. With wedge-shaped prongs at the center, and at each corner, you get five points of contact for a firm grip on your turning blank. * Allows you to quickly mount a spur center on your chuck—no need to ever take the chuck off your lathe.* Ideal for the…

    $19.99
  21. Pro Pen Turning Mandrel, #1 Morse Taper

    Pro Pen Turning Mandrel, #1 Morse Taper

    The essential tool for pen turning on a lathe! This precision-machined steel bar is held in the lathe to ensure accurate pen turning when using a live center. No drill chuck is required - the mandrel is held directly in the morse taper of your lathe! The brass compression fitting allows you…

    $13.99
  22. Nova Powergrip Jaw Set

    Nova Powergrip Jaw Set

    …Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models.* All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.* Nova chucks are…

    $62.99
  23. Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread

    Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread

    …different popular lathe models (see below). This makes it easy to bring your chucks with you when you change lathes.* Inserts are threaded both inside and out. Outside thread is made to fit into the Nova Chucks. The inside thread fits onto your lathe.* Note: Directly threaded chucks cannot be…

    $22.99
  24. Oneway Stronghold Chuck

    Oneway Stronghold Chuck

    …Superior taperlock adaptor* And its one-of-a-kind woodworm screw* Equals an absolutely superior chuck! Note: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

    3 Review(s)
    $274.99
  • Items 1 - 24 of 87
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X